ZoneMinder Binding

Supports the ZoneMinder video surveillance system.

Supported Things

The following thing types are supported:

Thing	ID	Discovery	Description
Server	server	Manual	Server bridge manages all communication with ZoneMinder server
Monitor	monitor	Automatic	Monitor represents a ZoneMinder camera monitor

Installation

The binding requires ZoneMinder version 1.34.0 or greater and API version 2.0 or greater. It also requires that you enable the OPT_USE_API parameter in the ZoneMinder configuration.

If your ZoneMinder is installed using a non-standard URL path or port number, that must be specified when you add the ZoneMinder server thing.

There are two different styles of operation, depending on whether or not you have ZoneMinder configured to use authentication.

Non-Authenticated

If ZoneMinder authentication is not used, the User and Password parameters should be empty in the ZoneMinder Server thing configuration. No other configuration is required.

Authenticated

The binding can access ZoneMinder with or without authentication. If ZoneMinder authentication is used, first make sure the ZoneMinder user has the API Enabled permission set in the ZoneMinder Users configuration. Then, enter the user name and password into the ZoneMinder Server thing configuration.

Discovery

The server bridge must be added manually. Once the server bridge is configured with a valid ZoneMinder host name or IP address, all monitors associated with the ZoneMinder server will be discovered.

Thing Configuration

Server Thing

The following configuration parameters are available on the Server thing:

Parameter	Parameter ID	Required/Optional	Description
Host	host	Required	Host name or IP address of the ZoneMinder server.
Use secure connection	useSSL	Required	Use http or https for connection to ZoneMinder. Default is http.
Port Number	portNumber	Optional	Port number if not on ZoneMinder default port 80.
Url Path	urlPath	Required	Path where Zoneminder is installed. Default is /zm. Enter / if Zoneminder is installed under root directory.
Refresh Interval	refreshInterval	Required	Frequency in seconds at which monitor status will be updated.
Default Alarm Duration	defaultAlarmDuration	Required	Can be used to set the default alarm duration on discovered monitors.
Default Image Refresh Interval	defaultImageRefreshInterval	Optional	Can be used to set the image refresh interval in seconds on discovered monitors. Leave empty to not set an image refresh interval.
Monitor Discovery Enabled	discoveryEnabled	Required	Enable/disable the automatic discovery of monitors. Default is enabled.
Monitor Discovery Interval	discoveryInterval	Required	Frequency in seconds at which the binding will try to discover monitors. Default is 300 seconds.
User ID	user	Optional	User ID of ZoneMinder user when using authentication.
Password	pass	Optional	Password of ZoneMinder user when using authentication.

Monitor Thing

The following configuration parameters are available on the Monitor thing:

Parameter	Parameter ID	Required/Optional	Description
Monitor ID	monitorId	Required	Id of monitor defined in ZoneMinder.
Image Refresh Interval	imageRefreshInterval	Optional	Interval in seconds in which snapshot image channel will be updated.
Alarm Duration	alarmDuration	Required	How long the alarm will run once triggered by the triggerAlarm channel.

Channels

Server Thing

Channel	Type	Description
imageMonitorId	String	Monitor ID to use for selecting an image URL. Also, sending an OFF command to this channel will reset the monitor id and url to UNDEF.
imageUrl	String	Image URL for monitor id specified by imageMonitorId. Channel is UNDEF if the monitor id is not set, or if an OFF command is sent to the imageMonitorId channel.
videoMonitorId	String	Monitor ID to use for selecting a video URL. Also, sending an OFF command to this channel will reset the monitor id and url to UNDEF.
videoUrl	String	Video URL for monitor id specified by videoMonitorId. Channel is UNDEF if the monitor id is not set, or if an OFF command is sent to the videoMonitorId channel.

Monitor Thing

Channel	Type	Description
id	String	Monitor ID
name	String	Monitor name
image	Image	Snapshot image
enable	Switch	Enable/disable monitor
function	String	Monitor function (e.g. Nodect, Mocord)
alarm	Switch	Monitor is alarming
state	String	Monitor state (e.g. IDLE, ALARM, TAPE)
triggerAlarm	Switch	Turn alarm on/off
hourEvents	Number	Number of events in last hour
dayEvents	Number	Number of events in last day
weekEvents	Number	Number of events in last week
monthEvents	Number	Number of events in last month
yearEvents	Number	Number of events in last year
totalEvents	Number	Total number of events
imageUrl	String	URL for image snapshot
videoUrl	String	URL for JPEG video stream
eventId	String	ID of most recently completed event
eventName	String	Name of most recently completed event
eventCause	String	Cause of most recently completed event
eventNotes	String	Notes of most recently completed event
eventStart	DateTime	Start date/time of most recently completed event
eventEnd	DateTime	End date/time of most recently completed event
eventFrames	Number	Number of frames of most recently completed event
eventAlarmFrames	Number	Number of alarm frames of most recently completed event
eventLength	Number:Time	Length in seconds of most recently completed event

Thing Actions

triggerAlarm

The triggerAlarm action triggers an alarm that runs for the number of seconds specified by the parameter duration.

triggerAlarm - trigger an alarm

void triggerAlarm(Number duration)

Parameters:
duration - The number of seconds for which the alarm should run.

triggerAlarm

The triggerAlarm action triggers an alarm that runs for the number of seconds specified in the Monitor thing configuration.

triggerAlarm - trigger an alarm

void triggerAlarm()

cancelAlarm

The cancelAlarm action cancels a running alarm.

cancelAlarm - cancel an alarm

void cancelAlarm()

Requirements

The binding requires ZoneMinder version 1.34.0 or greater, and API version 2.0 or greater. The API must be enabled in the ZoneMinder configuration using the OPT_USE_API parameter.

Full Example

Things

Bridge zoneminder:server:server [ host="192.168.1.100", refreshInterval=5, defaultAlarmDuration=120, discoveryEnabled=true, useDefaultUrlPath=true ]

Thing zoneminder:monitor:1 "Monitor 1" (zoneminder:server:server) [ monitorId="1", imageRefreshInterval=10, alarmDuration=180 ]

Thing zoneminder:monitor:2 "Monitor 2" (zoneminder:server:server) [ monitorId="2", imageRefreshInterval=10, alarmDuration=180 ]

Items

// Server
String ZmServer_ImageMonitorId "Image Monitor Id [%s]" { channel="zoneminder:server:server:imageMonitorId" }
String ZmServer_ImageUrl "Image Url [%s]" { channel="zoneminder:server:server:imageUrl" }
String ZmServer_VideoMonitorId "Video Monitor Id [%s]" { channel="zm:server:server:videoMonitorId" }
String ZmServer_VideoUrl "Video Url [%s]" { channel="zoneminder:server:server:videoUrl" }

// Monitor
String      ZM_Monitor1_Id           "Monitor Id [%s]"              { channel="zoneminder:monitor:1:id" }
String      ZM_Monitor1_Name         "Monitor Name [%s]"            { channel="zoneminder:monitor:1:name" }
Image       ZM_Monitor1_Image        "Image [%s]"                   { channel="zoneminder:monitor:1:image" }
Switch      ZM_Monitor1_Enable       "Enable [%s]"                  { channel="zoneminder:monitor:1:enable" }
String      ZM_Monitor1_Function     "Function [%s]"                { channel="zoneminder:monitor:1:function" }
Switch      ZM_Monitor1_Alarm        "Alarm Status [%s]"            { channel="zoneminder:monitor:1:alarm" }
String      ZM_Monitor1_State        "Alarm State [%s]"             { channel="zoneminder:monitor:1:state" }
Switch      ZM_Monitor1_TriggerAlarm "Trigger Alarm [%s]"           { channel="zoneminder:monitor:1:triggerAlarm" }
Number      ZM_Monitor1_HourEvents   "Hour Events [%.0f]"           { channel="zoneminder:monitor:1:hourEvents" }
Number      ZM_Monitor1_DayEvents    "Day Events [%.0f]"            { channel="zoneminder:monitor:1:dayEvents" }
Number      ZM_Monitor1_WeekEvents   "Week Events [%.0f]"           { channel="zoneminder:monitor:1:weekEvents" }
Number      ZM_Monitor1_MonthEvents  "Month Events [%.0f]"          { channel="zoneminder:monitor:1:monthEvents" }
Number      ZM_Monitor1_TotalEvents  "Total Events [%.0f]"          { channel="zoneminder:monitor:1:totalEvents" }
String      ZM_Monitor1_ImageUrl     "Image URL [%s]"               { channel="zoneminder:monitor:1:imageUrl" }
String      ZM_Monitor1_VideoUrl     "Video URL [%s]"               { channel="zoneminder:monitor:1:videoUrl" }
String      ZM_Monitor1_EventId      "Event Id [%s]"                { channel="zoneminder:monitor:1:eventId" }
String      ZM_Monitor1_Event_Name   "Event Name [%s]"              { channel="zoneminder:monitor:1:eventName" }
String      ZM_Monitor1_EventCause   "Event Cause [%s]"             { channel="zoneminder:monitor:1:eventCause" }
DateTime    ZM_Monitor1_EventStart   "Event Start [%s]"             { channel="zoneminder:monitor:1:eventStart" }
DateTime    ZM_Monitor1_EventEnd     "Event End [%s]"               { channel="zoneminder:monitor:1:eventEnd" }
Number      ZM_Monitor1_Frames       "Event Frames [%.0f]"          { channel="zoneminder:monitor:1:eventFrames" }
Number      ZM_Monitor1_AlarmFrames  "Event Alarm Frames [%.0f]"    { channel="zoneminder:monitor:1:eventAlarmFrames" }
Number:Time ZM_Monitor1_Length       "Event Length [%.2f]"          { channel="zoneminder:monitor:1:eventLength" }

Sitemap

Selection item=ZmServer_ImageMonitorId
Image item=ZmServer_ImageUrl
Selection item=ZmServer_VideoMonitorId
Video item=ZmServer_VideoUrl url="" encoding="mjpeg"
                
Selection item=ZM_Monitor1_Function
Selection item=ZM_Monitor1_Enable
Image item=ZM_Monitor1_Image

Rules

The following examples assume you have a motion sensor that is linked to an item called MotionSensorAlarm.

rule "Record When Motion Detected Using Channel"
when
    Item MotionSensorAlarm changed to ON
then
    ZM_TriggerAlarm.sendComand(ON)
end

rule "Record for 120 Seconds When Motion Detected"
when
    Item MotionSensorAlarm changed to ON
then
    val zmActions = getActions("zoneminder", "zoneminder:monitor:1")
    zmActions.triggerAlarm(120)
end

rule "Record When Motion Detected"
when
    Item MotionSensorAlarm changed to ON
then
    val zmActions = getActions("zoneminder", "zoneminder:monitor:1")
    zmActions.triggerAlarm()
end

rule "Record When Motion Detection Cleared"
when
    Item MotionSensorAlarm changed to OFF
then
    val zmActions = getActions("zoneminder", "zoneminder:monitor:1")
    zmActions.cancelAlarm()
end

val monitors = newArrayList("1", "3", "4", "6")
var int index = 0

rule "Rotate Through a List of Monitor Images Every 10 Seconds"
when
    Time cron "0/10 * * ? * * *"
then
    ZmServer_ImageMonitorId.sendCommand(monitors.get(index))
    index = index + 1
    if (index >= monitors.size) {
        index = 0
    }
end

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)