This page is part of archived documentation for openHAB 3.4. Go to the current stable version

# ValloxMV Binding

This binding is designed to connect to the web interface of Vallox MV series of ventilation unit. It has been tested so far only with Vallox 350 MV and 510 MV.

# Supported Things

There is one thing (valloxmv) supporting the connection via the web interface of the Vallox MV. There is NO support of former modbus connected devices.

# Discovery

This binding does not support any discovery, IP address has to be provided.

# Thing Configuration

The Thing needs the information at which IP the web interface could be reached and how often the values should be updated. Minimum update interval is limited to 15 sec in order to avoid polling again before results have been evaluated.

Config Description Type Default
ip IP address of web interface string n/a
updateinterval Interval in seconds in which the interface is polled int 60

# Channels

Overview of provided channels

Channel ID Vallox Name Description Read/Write Values
onoff A_CYC_MODE On off switch rw On/Off
state several Current state of ventilation unit rw 1=FIREPLACE, 2=AWAY, 3=ATHOME, 4=BOOST
fanspeed A_CYC_FAN_SPEED Fan speed r 0 - 100 (%)
fanspeedextract A_CYC_EXTR_FAN_SPEED Fan speed of extracting fan r 1/min
fanspeedsupply A_CYC_SUPP_FAN_SPEED Fan speed of supplying fan r 1/min
tempinside A_CYC_TEMP_EXTRACT_AIR Extracted air temp r Number (°C)
tempoutside A_CYC_TEMP_OUTDOOR_AIR Outside air temp r Number (°C)
tempexhaust A_CYC_TEMP_EXHAUST_AIR Exhausted air temp r Number (°C)
tempincomingbeforeheating A_CYC_TEMP_SUPPLY_CELL_AIR Incoming air temp (pre heating) r Number (°C)
tempincoming A_CYC_TEMP_SUPPLY_AIR Incoming air temp r Number (°C)
humidity A_CYC_RH_VALUE Extracted air humidity r 0 - 100 (%)
cellstate A_CYC_CELL_STATE Current cell state r 0=heat recovery, 1=cool recovery, 2=bypass, 3=defrosting
uptimeyears A_CYC_TOTAL_UP_TIME_YEARS Total uptime years r Y
uptimehours A_CYC_TOTAL_UP_TIME_HOURS Total uptime hours r h
uptimehourscurrent A_CYC_CURRENT_UP_TIME_HOURS Current uptime in hours r h
filterchangeddate A_CYC_FILTER_CHANGED_DAY/MONTH/YEAR Last filter change r date
remainingfilterdays A_CYC_CURRENT_UP_TIME_HOURS Days until filter change r d
extrfanbalancebase A_CYC_EXTR_FAN_BALANCE_BASE Extract fan base speed rw 0 - 100 (%)
suppfanbalancebase A_CYC_SUPP_FAN_BALANCE_BASE Supply fan base speed rw 0 - 100 (%)
homespeedsetting A_CYC_HOME_SPEED_SETTING Home fan speed rw 0 - 100 (%)
awayspeedsetting A_CYC_AWAY_SPEED_SETTING Away fan speed rw 0 - 100 (%)
boostspeedsetting A_CYC_BOOST_SPEED_SETTING Boost fan speed rw 0 - 100 (%)
homeairtemptarget A_CYC_HOME_AIR_TEMP_TARGET Target temperature in home state rw Number (°C)
awayairtemptarget A_CYC_AWAY_AIR_TEMP_TARGET Target temperature in away state rw Number (°C)
boostairtemptarget A_CYC_BOOST_AIR_TEMP_TARGET Target temperature in boost state rw Number (°C)
boosttime A_CYC_BOOST_TIME Timer value in boost profile rw 1 - 65535 (min)
boosttimerenabled A_CYC_BOOST_TIMER_ENABLED Timer enabled setting in boost profile rw On/Off
fireplaceextrfan A_CYC_FIREPLACE_EXTR_FAN Fireplace profile extract fan speed rw 0 - 100 (%)
fireplacesuppfan A_CYC_FIREPLACE_SUPP_FAN Fireplace profile supply fan speed rw 0 - 100 (%)
fireplacetime A_CYC_FIREPLACE_TIME Timer value in fireplace profile rw 1 - 65535 (min)
fireplacetimerenabled A_CYC_FIREPLACE_TIMER_ENABLED Timer enabled setting in fireplace profile rw On/Off
extraairtemptarget A_CYC_EXTRA_AIR_TEMP_TARGET Target temperature in extra profile rw Number (°C)
extraextrfan A_CYC_EXTRA_EXTR_FAN Extra profile extract fan speed rw 0 - 100 (%)
extrasuppfan A_CYC_EXTRA_EXTR_FAN Extra profile supply fan speed rw 0 - 100 (%)
extratime A_CYC_EXTRA_TIME Timer value in extra profile rw 1 - 65535 (min)
extratimerenabled A_CYC_EXTRA_TIMER_ENABLED Timer enabled setting in extra profile rw On/Off
weeklytimerenabled A_CYC_WEEKLY_TIMER_ENABLED Weekly timer enabled setting rw On/Off

# Example

# Things file

Thing valloxmv:valloxmv:lueftung [ip="192.168.1.3", updateinterval=60]

# Items file

Number State                   "Current state: [%d]"   {channel="valloxmv:valloxmv:lueftung:state"}
Number FanSpeed                "Fanspeed [%d %%]"  {channel="valloxmv:valloxmv:lueftung:fanspeed"}

Number Temp_TempInside         "Temp inside [%.1f °C]" <temperature>    {channel="valloxmv:valloxmv:lueftung:tempinside"}
Number Temp_TempOutside        "Temp outside [%.1f °C]"    <temperature>      {channel="valloxmv:valloxmv:lueftung:tempoutside"}
Number Temp_TempExhaust        "Temp outgoing [%.1f °C]"   <temperature>   {channel="valloxmv:valloxmv:lueftung:tempexhaust"}
Number Temp_TempIncoming       "Temp incoming [%.1f °C]"   <temperature>   {channel="valloxmv:valloxmv:lueftung:tempincoming"}

Number Humidity                "Humidity [%d %%]"  {channel="valloxmv:valloxmv:lueftung:humidity"}