This page is part of archived documentation for openHAB 3.4. Go to the current stable version

# IRtrans Binding

This binding integrates infrared receivers and blasters manufactured by IRtrans (www.irtrans.de (opens new window))

# Supported Things

The ethernet Bridge supports the Ethernet (PoE) IRtrans transceiver equipped with an on-board IRDB database. Blasters and receivers are defined as Channels on the Bridge, but one can also define blasters as a blaster child Thing on the Bridge.

# Discovery

There is no Discovery feature available.

# Binding Configuration

There is no specific binding configuration required.

# Thing Configuration

The ethernet Bridge requires an ipAddress IP address and portNumber TCP port number in order to configure it. Optionally, one can add the following parameters to the configuration:

bufferSize : Buffer size used by the TCP socket when sending and receiving commands to the transceiver (default: 1024) responseTimeOut : Specifies the time milliseconds to wait for a response from the transceiver when sending a command (default: 100) pingTimeOut : Specifies the time milliseconds to wait for a response from the transceiver when pinging the device (default: 1000) reconnectInterval : Specifies the time seconds to wait before reconnecting to a transceiver after a communication failure (default: 10)

The blaster Thing requires a led parameter to specify on which infrared commands will be emitted, remote the remote or manufacturer name which's commands will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be ' *' for 'any' remote), and command the name of the command will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be '*' for 'any' command).

# Channels

The ethernet Thing supports the following Channel Types:

Channel Type ID Item Type Description
blaster String Send (filtered) infrared commands over the specified blaster LED of the transceiver
receiver String Receive (filtered) infrared commands on the receiver LED of the transceiver

The blaster Channel Type requires a led configuration parameter to specify on which infrared commands will be emitted, remote the remote or manufacturer name which's commands will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be '*' for 'any' remote), and command the name of the command will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be '*' for 'any' command).

The receiver Channel Type requires remote the remote or manufacturer name which's commands will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be '*' for 'any' remote), and command the name of the command will be allowed, as defined in the IRtrans server database that is flashed into the transceiver (can be '*' for 'any' command).

The blaster Thing supports a io Channel (of Item Type String) that allows to read infrared commands received by the blaster, as well as to write infrared commands to be sent by the blaster.

The IRtrans transceivers store infrared commands in a "remote,command" table, e.g. "telenet,power". Sending the literal text string "telenet,power" to the transceiver will make the transceiver "translate" that into the actual infrared command that will be emitted by the transceiver. A "remote,command" string sent to a Channel that does not match the defined filter will be ignored.

# Full Example

demo.things:

Bridge irtrans:ethernet:kitchen [ ipAddress="192.168.0.56", portNumber=21000, bufferSize=1024, responseTimeOut=100, pingTimeOut=2000, reconnectInterval=10 ]
{
Channels:
Type receiver : any [remote="*", command="*"]
Type receiver : telenet_power [remote="telenet", command="power"]
Type blaster : samsung [led="E", remote="samsung", command="*"]
}

In the above example, the first channel will be updated when any IR command from any type of device is received. The second channel will only be updated if a "power" infrared command from the remote/device type "telenet" is received. The third channel can be used to feed any type of infrared command to a Samsung television by means of the "E" emitter of the IRtrans device. The led can be "E"-External, "I"-Internal, "B"-Both, and a numeric for a selected led. Depending on the number of remotes, the bufferSize must be adjusted. E.g. for 7 remotes and 47 commands a bufferSize of 2048 is needed.

Bridge irtrans:ethernet:technicalfacilities [ ipAddress="192.168.0.58", portNumber=21000, bufferSize=1024, responseTimeOut=100, pingTimeOut=2000, reconnectInterval=10 ]
{
Channels:
Type receiver : any [remote="*", command="*"]
Type blaster : telenet1 [led="2", remote="telenet", command="*"]
Type blaster : telenet2 [led="1", remote="telenet", command="*"]
Type blaster : appletv [led="3", remote="appletv", command="*"]
}

In the above channel a single IRtrans transceiver has 3 output LEDs in use, 2 to drive 2 DTV SetTopBoxes, and a third one to drive an Apple TV device.

demo.items:

String KitchenIRReceiverAny {channel="irtrans:ethernet:kitchen:any"}
String KitchenIRReceiverTelenetPower {channel="irtrans:ethernet:kitchen:telenet_power"}
String KitchenIRBlasterSamsung {channel="irtrans:ethernet:kitchen:samsung"}

String TechnicalFacilitiesIRReceiverAny {channel="irtrans:ethernet:technicalfacilities:any"}
String TechnicalFacilitiesIRBlasterTelenet2 {channel="irtrans:ethernet:technicalfacilities:telenet2"}
String TechnicalFacilitiesIRBlasterTelenet1 {channel="irtrans:ethernet:technicalfacilities:telenet1"}
String TechnicalFacilitiesIRBlasterAppleTV {channel="irtrans:ethernet:technicalfacilities:appletv"}

demo.rules:

rule "Kitchen switch IR rule"
when
    Item KitchenIRReceiverTelenetPower received update 
then
    createTimer(now.plusSeconds(5)) [|
        KitchenIRBlasterSamsung.sendCommand("samsung,power")
        ]
end