Xiaomi Wifi devices (Mi IO) Binding

This binding is used to control Xiaomi products implementing the Mi IO protocol. This protocol is used for most of Xiaomi Mi Ecosystem wifi devices which is branded as MiJia. If your Xiaomi wifi device is controlled by the mihome app, most likely it communicates using the Mi IO protocol and can communicate with openHAB using this binding.

Supported Things

The following things types are available:

ThingType	Description
miio:generic	Generic type for discovered devices. Once the token is available and the device model is determined, this ThingType will automatically change to the appropriate ThingType
miio:vacuum	For Xiaomi/RoboRock Robot Vacuum products
miio:basic	For most other devices like yeelights, airpurifiers. Channels and commands are determined by database configuration
miio:gateway	Similar to basic, but with the Bridge feature, it can support to forward commands for connected devices
miio:lumi	Thing type for subdevices connected to the gateway. Note, these devices require a defined gateway to function
miio:unsupported	For experimenting with other devices which use the Mi IO protocol or to build experimental support

Discovery

The binding has 2 methods for discovering devices. Depending on your network setup and the device model, your device may be discovered by one or both methods. If both methods discover your device, 2 discovery results may be in your inbox for the same device.

The mDNS discovery method will discover your device type, but will not discover a (required) token. The basic discovery will not discovery the type, but will discover a token for models that support it. Accept only one of the 2 discovery results, the alternate one can further be ignored.

Tokens

The binding needs a token from the Xiaomi Mi Device in order to be able to control it. The binding can retrieve the needed tokens from the Xiaomi cloud. Go to the binding config page and enter your cloud username and password. The server(s) to which your devices are connected need to be entered as well. Use the one of the regional servers: cn,de,i2,tw,ru,sg,us. Multiple servers can be separated with comma, or leave blank to test all known servers. See binding configuration for more details about the binding config.

Tokens without cloud access

Some devices provide the token upon discovery. This may depends on the firmware version. If the device does not discover your token, it needs to be retrieved from the Mi Home app.

The easiest way to obtain tokens is to browse through log files of the Mi Home app version 5.4.49 for Android. It seems that version was released with debug messages turned on by mistake. An APK file with the old version can be easily found using one of the popular web search engines. After downgrading use a file browser to navigate to directory SmartHome/logs/plug_DeviceManager, then open the most recent file and search for the token. When finished, use Google Play to get the most recent version back.

For iPhone, use an un-encrypted iTunes-Backup and unpack it and use a sqlite tool to view the files in it: Then search in "RAW, com.xiaomi.home," for "USERID_mihome.sqlite" and look for the 32-digit-token or 96 digit encrypted token.

Note. The Xiaomi devices change the token when inclusion is done. Hence if you get your token after reset and than include it with the Mi Home app, the token will change.

Binding Configuration

No binding configuration is required. However to enable cloud functionality enter your Xiaomi username, password and server(s). The list of the known countries and related severs is here.

After successful Xiaomi cloud login, the binding will use the connection to retrieve the required device tokens from the cloud. For Xiaomi vacuums the map can be visualized in openHAB using the cloud connection.

To enter your cloud details go to the bindings page, click the Xiaomi Mi IO binding and than configure.

In the configuration page, enter your userID /passwd and county(s) or leave the countries servers blank.

The binding also supports the discovery of devices via the cloud. This may be useful if the device is on a separate subnet. (note, after accepting such a device on a different subnet, the communication needs to be set to cloud in order to have it working.)

Thing Configuration

Each Xiaomi device (thing) needs the IP address and token configured to be able to communicate. See discovery for details. Optional configuration is the refresh interval and the deviceID. Note that the deviceID is automatically retrieved when it is left blank. The configuration for model is automatically retrieved from the device in normal operation. However, for devices that are unsupported, you may override the value and try to use a model string from a similar device to experimentally use your device with the binding.

Parameter	Type	Required	Description
host	text	true	Device IP address
token	text	true	Token for communication (in Hex)
deviceId	text	true	Device Id (typically a number for normal devices) for communication
model	text	false	Device model string, used to determine the subtype
refreshInterval	integer	false	Refresh interval for refreshing the data in seconds. (0=disabled)
timeout	integer	false	Timeout time in milliseconds
communication	text	false	Communicate direct or via cloud (options values: 'direct', 'cloud')
cloudServer	text	false	Identifies the country server to use in case of cloud communication

Note: Suggest to use the cloud communication only for devices that require it. It is unknown at this time if Xiaomi has a rate limit or other limitations on the cloud usage. e.g. if having many devices would trigger some throttling from the cloud side. Note2: communications parameter is not available for lumi devices. Lumi devices communicate using the bridge/gateway.

Example Thing file

Thing miio:basic:light "My Light" [ host="192.168.x.x", token="put here your token", deviceId="326xxxx", model="philips.light.bulb", communication="direct" ]

or in case of unknown models include the model information of a similar device that is supported:

Thing miio:vacuum:s50 "vacuum" @ "livingroom" [ host="192.168.15.20", token="xxxxxxx", deviceId="326xxxx", model="roborock.vacuum.s4", communication="direct", cloudServer="de" ]

in case of gateway, instead of defining it as a Thing, use Bridge

Bridge miio:gateway:lumigateway "Mi Smarter Gateway" [ host="10.10.x.x", token="put here your token", deviceId="326xxxx", model="lumi.gateway.mieu01", communication="direct", cloudServer="de" ]

Advanced: Unsupported devices

Newer devices may not yet be supported. However, many devices share large similarities with existing devices. The binding allows to try/test if your new device is working with database files of older devices as well.

There are 2 ways to get unsupported devices working, by overriding the model with the model of a supported item or by test all known properties to see which are supported by your device.

Substitute model for unsupported devices

Replace the model with the model which is already supported. For this, first remove your unsupported thing. Manually add a miio:basic thing. Besides the regular configuration (like ip address, token) the modelId needs to be provided. Normally the modelId is populated with the model of your device, however in this case, use the modelId of a similar device. Look at the openHAB forum, or the openHAB GitHub repository for the modelId of similar devices.

Supported property test for unsupported devices

The unsupported device has a test channel with switch. When switching on, all known properties are tested, this may take few minutes. A test report will be shown in the log and is saved in the userdata/miio folder with a filename test-[your model]-[timestamp].txt. If supported properties are found, an experimental database file is saved to the conf/misc/miio folder (see below chapter). The thing will go offline and will come back online as basic device, supporting the found channels. The database file may need to be modified to display the right channel names. After validation, please share the logfile and json files on the openHAB forum or the openHAB GitHub to build future support for this model.

Advanced: adding local database files to support new devices

Things using the basic handler (miio:basic things) are driven by json 'database' files. This instructs the binding which channels to create, which properties and actions are associated with the channels etc. The conf/misc/miio (e.g. in Linux /opt/openhab/conf/misc/miio/) is scanned for database files and will be used for your devices. During the start of the binding the exact path used in your system will be printed in the debug log. Watch for a line containing Started miio basic devices local databases watch service. Watching for database files at path: … ( If this folder is created after the start of the binding, you may need to restart the binding (or openHAB) to be able to use the local files. Note that local database files take preference over build-in ones, hence if a json file is local and in the database the local file will be used. For format, please check the current database files in openHAB GitHub.

FAQ.. what to do in case of problems

If your device is not getting online:

Are you using text config? Make sure you define all the fields as per above example. Or, better, try to get it going first without text config.

The token is wrong The most common cause of non responding devices is a wrong token. When you reset, or change wifi or update firmware, and possibly other cases as well, the token may change. You'll need to get a refreshed token.

My token is coming from the cloud... how can it be wrong? Is not very likely but still can happen._ This can happen e.g. if your device is defined on multiple country servers. The binding may pull the token from the wrong country server. First try to get the token from all country servers by leave the county setting empty. If that does not solve it, you define only the country that the device is on in the binding config page (where the cloud userid/pwd is entered) this should pull the right token.

You have the same device added multiple times. The communication each time send a sequential number. If the device is twice defined, the numbers received by the device are no longer sequential and it will stop responding for some time.

The connection is not too good, so you have timeouts etc. Position your device closer to wifi / check in the mihome app if the wifi strength is good enough. Alternatively as described above, double check for multiple connections for single device.

Your device is on a different subnet? This is in most cases not working. Firmware of the device don't accept commands coming from other subnets. Set the communication in the thing configuration to 'cloud'.

Cloud connectivity is not working The most common problem is a wrong or missing userId/password. Update your Xiaomi cloud userId & password in the miio binding configuration screen. If the problem persists you can try the following:

• Xiaomi Account verification might be needed. For some users login by the binding is unsuccessful as account verification is required, but the binding currently has no possibilities to handle this. In order to pass validation your (openHAB server) ip need to be validated/confirmed. Browse to https://account.xiaomi.com/ (opens new window) and logon to your account. Note: use the same external ip address as your openHAB server, e.g. you may need to disable your VPN.
• If above is not possible or fails, You can try to find in the binding debug logging a location url. Try to login using this url (just after it fails) with your browser.
• Several users also reported success by resetting their Xiaomi password.

If it still fails, you're bit out of luck. You may try to restart openHAB (not just the binding) to clean the cookies. As the cloud logon process is still little understood, your only luck might be to enable trace logging and see if you can translate the Chinese error code that it returns.

My Roborock vacuum is not found or not reacting Did you link the vacuum with the Roborock app? This won't work, the Roborock app is using a different communication method. Reset your vacuum and connect it to the Xiaomi MiHome app. This will change the communication method and the Mi IO binding can communicate with the vacuum.

Mi IO Devices

Currently the miio binding supports more than 340 different models.

Device	ThingType	Device Model	Supported	Remark
AUX Smart Air Conditioner	miio:unsupported	aux.aircondition.v1	No
Mi Air Frying Pan	miio:basic	careli.fryer.maf01	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Fryer (3.5L)	miio:basic	careli.fryer.maf02	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Frying Pan	miio:basic	careli.fryer.maf03	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Qingping Air Monitor Lite	miio:basic	cgllc.airm.cgdn1	Yes
Mi Multifunction Air Monitor	miio:basic	cgllc.airmonitor.b1	Yes
Qingping Air Monitor	miio:basic	cgllc.airmonitor.s1	Yes
Mi Universal Remote	miio:unsupported	chuangmi.ir.v2	No
Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway)	miio:basic	chuangmi.plug.212a01	Yes
Mi Smart Plug WiFi	miio:basic	chuangmi.plug.hmi205	Yes
Mi Smart Plug (WiFi)	miio:basic	chuangmi.plug.hmi206	Yes
Mi Smart Wi-Fi Plug (Bluetooth Gateway)	miio:basic	chuangmi.plug.hmi208	Yes
Mi Plug Mini	miio:basic	chuangmi.plug.m1	Yes
Mi Smart Plug (Wi-Fi) Basic	miio:basic	chuangmi.plug.m3	Yes
Mi Smart Power Plug	miio:basic	chuangmi.plug.v1	Yes
Mi Smart Power Plug v2	miio:basic	chuangmi.plug.v2	Yes
MIJIA Smart Plug Enhanced	miio:basic	chuangmi.plug.v3	Yes
Mi Remote	miio:unsupported	chuangmi.remote.v2	No
Mi IH Rice Cooker	miio:unsupported	chunmi.cooker.normal1	No
Mi IH Rice Cooker	miio:unsupported	chunmi.cooker.normal2	No
Mi IH Rice Cooker 4L	miio:unsupported	chunmi.cooker.normal4	No
Mi IH Pressure Rice Cooker	miio:unsupported	chunmi.cooker.press1	No
Mi IH Pressure Rice Cooker	miio:unsupported	chunmi.cooker.press2	No
Gosund Smart Plug	miio:basic	cuco.plug.cp1	Yes
Mi Smart Antibacterial Humidifier	miio:basic	deerma.humidifier.jsq	Yes
Mi S Smart Humidifer	miio:basic	deerma.humidifier.jsq1	Yes
Mi Smart Antibacterial Humidifier	miio:basic	deerma.humidifier.jsq5	Yes
Mi Smart Humidifer S	miio:basic	deerma.humidifier.jsqs	Yes
Mi Smart Humidifier	miio:basic	deerma.humidifier.mjjsq	Yes
Mi Fresh Air Ventilator A1-150	miio:basic	dmaker.airfresh.a1	Yes
Mi Fresh Air Ventilator	miio:basic	dmaker.airfresh.t2017	Yes
Mi Smart Standing Fan 2 Lite	miio:basic	dmaker.fan.1c	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Standing Fan 1X	miio:basic	dmaker.fan.p5	Yes
Mi Smart Standing Fan 1C	miio:basic	dmaker.fan.p8	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Tower Fan	miio:basic	dmaker.fan.p9	Yes
Mi Smart Standing Fan 2	miio:basic	dmaker.fan.p10	Yes
Mi Smart Standing Fan Pro	miio:basic	dmaker.fan.p15	Yes	Identified manual actions for execution action{"did":"off-delay-time-toggle","siid":3,"aiid":1,"in":[]} Please test and feedback if they are working so they can be linked to a channel.
Mi Smart Standing Fan 2	miio:basic	dmaker.fan.p18	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum Mop 1C STYTJ01ZHM	miio:basic	dreame.vacuum.mc1808	Yes
Dreame Robot Vacuum-Mop F9	miio:basic	dreame.vacuum.p2008	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Robot Vacuum D9	miio:basic	dreame.vacuum.p2009	Yes
Dreame Bot W10	miio:basic	dreame.vacuum.p2027	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot Z10 Pro	miio:basic	dreame.vacuum.p2028	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot L10 Pro	miio:basic	dreame.vacuum.p2029	Yes
Trouver Robot LDS Vacuum-Mop Finder	miio:basic	dreame.vacuum.p2036	Yes
Mi Robot Vacuum-Mop 2 Pro+	miio:basic	dreame.vacuum.p2041o	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA Z500 Robot Vacuum and Mop Cleaner	miio:basic	dreame.vacuum.p2156o	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA L600 Robot Vacuum and Mop Cleaner	miio:basic	dreame.vacuum.p2157	Yes
Dreame Bot D9 Max	miio:basic	dreame.vacuum.p2259	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ARIES For Bedroom	miio:basic	huayi.light.ari013	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ARIES For Living Room	miio:basic	huayi.light.aries	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Light	miio:basic	huayi.light.fanwy	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Light(2020)	miio:basic	huayi.light.fanwy2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Living Room	miio:basic	huayi.light.peg091	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Bedroom	miio:basic	huayi.light.peg093	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Bedroom	miio:basic	huayi.light.pis123	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Living Room	miio:basic	huayi.light.pisces	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Bedroom	miio:basic	huayi.light.tau023	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Living Room	miio:basic	huayi.light.taurus	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Bedroom	miio:basic	huayi.light.vir063	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Living Room	miio:basic	huayi.light.virgo	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Ceiling Light	miio:basic	huayi.light.wy	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO LIANGCHEN(BLE Mesh)	miio:basic	huayi.light.wy200	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO SAG Downlight (BLE Mesh)	miio:basic	huayi.light.wy201	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Bulb (BLE Mesh)	miio:basic	huayi.light.wy202	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO YONG Downlight (BLE Mesh)	miio:basic	huayi.light.wy203	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
huayi.light.wy204	miio:basic	huayi.light.wy204	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Heating Lamp	miio:basic	huayi.light.wyheat	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ZIWEI Ceiling Lamp	miio:basic	huayi.light.zw131	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MiJia Rice Cooker	miio:unsupported	hunmi.cooker.normal3	No
Jinxing Smart Air Conditioner	miio:unsupported	idelan.aircondition.v1	No
Xiaomi Robot Vacuum-Mop 2S	miio:basic	ijai.vacuum.v19	Yes
IKEA E27 white spectrum opal	miio:lumi	ikea.light.led1545g12	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 white spectrum clear	miio:lumi	ikea.light.led1546g12	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 white spectrum	miio:lumi	ikea.light.led1536g5	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 white spectrum	miio:lumi	ikea.light.led1537r6	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 warm white	miio:lumi	ikea.light.led1623g12	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 warm white	miio:lumi	ikea.light.led1650r5	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 warm white	miio:lumi	ikea.light.led1649c5	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Wall Switch(No Neutral, Single Rocker)	miio:unsupported	lumi.ctrl_neutral1.v1	No
Aqara Wall Switch (No Neutral, Double Rocker)	miio:unsupported	lumi.ctrl_neutral2.v1	No
Xiaomiyoupin Curtain Controller (Wi-Fi)	miio:basic	lumi.curtain.hagl05	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier virtual	miio:gateway	lumi.gateway.mgl03	Experimental	Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hub	miio:gateway	lumi.gateway.mieu01	Yes	Used to control the gateway itself. Experimental support for controlling lumi subdevices
Mi smart Home Gateway Hub v1	miio:gateway	lumi.gateway.v1	Experimental	Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home GatewayHub v2	miio:gateway	lumi.gateway.v2	Experimental	Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hub v3	miio:gateway	lumi.gateway.v3	Experimental	Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara LED Light Bulb (Tunable White)	miio:lumi	lumi.light.aqcn02	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Door lock	miio:lumi	lumi.lock.v1	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lock	miio:lumi	lumi.lock.aq1	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lock S2	miio:lumi	lumi.lock.acn02	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door lock S2 Pro	miio:lumi	lumi.lock.acn03	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Plug (Zigbee)	miio:lumi	lumi.plug.mmeu01	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge.
Mi Window and Door Sensor	miio:lumi	lumi.sensor_magnet.v2	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge. Note: Won't display the current status. Log only'
Mi Motion Sensor	miio:lumi	lumi.sensor_motion.aq2	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Motion Sensor	miio:lumi	lumi.sensor_motion.v2	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Temperature and Humidity Sensor	miio:lumi	lumi.sensor_ht.v1	Experimental	Needs to have the Xiaomi gateway configured in the binding as bridge. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Water Leak Sensor	miio:lumi	lumi.sensor_wleak.aq1	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge.
Aqara Temperature and Humidity Sensor	miio:lumi	lumi.weather.v1	Yes	Needs to have the Xiaomi gateway configured in the binding as bridge.
Midea AC-i Youth	miio:unsupported	midea.aircondition.v1	No
Midea Air Conditioner v2	miio:unsupported	midea.aircondition.v2	No
Midea AC-Cool Golden	miio:unsupported	midea.aircondition.xa1	No
Mi Robot Vacuum-Mop Essential	miio:basic	mijia.vacuum.v2	Yes	This device may be overwhelmed if refresh is too frequent, slowing down the responses. Suggest to increase refresh time to 120 seconds
Mijia Smart Pet Water Dispenser	miio:basic	mmgg.pet_waterer.s1	Experimental	Identified manual actions for execution action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]} action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]} action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]} Please test and feedback if they are working so they can be linked to a channel. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispenser	miio:basic	mmgg.pet_waterer.s2	Experimental	Identified manual actions for execution action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]} action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]} action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]} Please test and feedback if they are working so they can be linked to a channel. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispenser	miio:basic	mmgg.pet_waterer.s3	Experimental	Identified manual actions for execution action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]} action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]} action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]} Please test and feedback if they are working so they can be linked to a channel. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
XIAOWAN Smart Pet Water Dispenser	miio:basic	mmgg.pet_waterer.s4	Experimental	Identified manual actions for execution action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]} action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]} action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]} Please test and feedback if they are working so they can be linked to a channel. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND	miio:basic	mrbond.airer.m1pro	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND	miio:basic	mrbond.airer.m1s	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND	miio:basic	mrbond.airer.m1super	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
WIDETECH WDH318EFW1 Internet Dehumidifier	miio:basic	nwt.derh.wdh318efw1	Yes
Philips Zhirui Ceiling Lamp Bedroom 40W	miio:basic	philips.light.bceiling1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 28W	miio:basic	philips.light.bceiling2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui E27 bulb	miio:basic	philips.light.bulb	Yes
Philips ZhiRui E14 Candle Lamp Frosted version	miio:basic	philips.light.candle	Yes
Philips ZhiRui E14 Candle Lamp Crystal version	miio:basic	philips.light.candle2	Yes
Mijia Philips Color Bulb	miio:basic	philips.light.cbulb	Yes
Philips Light	miio:basic	philips.light.cbulbs	Yes
Philips Connected Ceiling	miio:basic	philips.light.ceiling	Yes
Philips Light	miio:basic	philips.light.dcolor	Yes
ZhiRui Dimmable Downlight	miio:basic	philips.light.dlight	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui Downlight	miio:basic	philips.light.downlight	Yes
Philips Wi-Fi bulb E27 White	miio:basic	philips.light.hbulb	Yes
Philips ZhiYi Ceiling Lamp FL 40W	miio:basic	philips.light.lnblight1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 28W	miio:basic	philips.light.lnblight2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 80W	miio:basic	philips.light.lnlrlight	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Living room 80W	miio:basic	philips.light.lrceiling	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 80W	miio:basic	philips.light.mceil	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 40W	miio:basic	philips.light.mceilm	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 28W	miio:basic	philips.light.mceils	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Smart Lamp	miio:basic	philips.light.mono1	Yes
Philips ZhiRui Bedside Lamp	miio:basic	philips.light.moonlight	Yes
Zhirui Ceiling Lamp Black 80W	miio:basic	philips.light.obceil	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 40W	miio:basic	philips.light.obceim	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 28W	miio:basic	philips.light.obceis	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Philips Study Desk Lamp	miio:basic	philips.light.rwread	Yes
Zhirui Ceiling Lamp Starry 80W	miio:basic	philips.light.sceil	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 40W	miio:basic	philips.light.sceilm	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 28W	miio:basic	philips.light.sceils	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips EyeCare Connected Desk Lamp gen2.	miio:basic	philips.light.sread1	Yes
Mijia Philips Desk Lamp 2S	miio:basic	philips.light.sread2	Yes
Philips Connected Lights	miio:basic	philips.light.virtual	Yes
Zhirui Ceiling Lamp Gorgeous 80W	miio:basic	philips.light.xzceil	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 40W	miio:basic	philips.light.xzceim	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 28W	miio:basic	philips.light.xzceis	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lamp	miio:basic	philips.light.zyceiling	Yes
Philips ZhiYi Desk Lamp	miio:basic	philips.light.zysread	Yes
Philips ZhiYi Strip	miio:basic	philips.light.zystrip	Yes
CHINGMI Smart Power Strip v1	miio:basic	qmi.powerstrip.v1	Yes
Rockrobo Xiaowa Sweeper v2	miio:unsupported	roborock.sweeper.e2v2	No
Rockrobo Xiaowa Sweeper v3	miio:unsupported	roborock.sweeper.e2v3	No
Roborock S6 Pure	miio:vacuum	roborock.vacuum.a08	Yes
Roborock T7 Pro	miio:vacuum	roborock.vacuum.a09	Yes
Roborock S6 MaxV	miio:vacuum	roborock.vacuum.a10	Yes
Roborock T7	miio:vacuum	roborock.vacuum.a11	Yes
Roborock T7S	miio:vacuum	roborock.vacuum.a14	Yes
Roborock S7	miio:vacuum	roborock.vacuum.a15	Yes
Roborock S4 Max	miio:vacuum	roborock.vacuum.a19	Yes
Roborock T7S Plus	miio:vacuum	roborock.vacuum.a23	Yes
Roborock G10S Pro	miio:vacuum	roborock.vacuum.a26	Yes
Roborock S7 MaxV	miio:vacuum	roborock.vacuum.a27	Yes
Roborock G10	miio:vacuum	roborock.vacuum.a29	Yes
Roborock G10	miio:vacuum	roborock.vacuum.a30	Yes
Roborock Q5	miio:vacuum	roborock.vacuum.a34	Yes
Roborock T8	miio:vacuum	roborock.vacuum.a37	Yes
Roborock Q7 Max	miio:vacuum	roborock.vacuum.a38	Yes
Roborock Q7	miio:vacuum	roborock.vacuum.a40	Yes
Roborock G10S	miio:vacuum	roborock.vacuum.a46	Yes
Roborock T8 Plus	miio:vacuum	roborock.vacuum.a52	Yes
Roborock S7 Pro Ultra	miio:vacuum	roborock.vacuum.a62	Yes
Xiaowa C1	miio:vacuum	roborock.vacuum.c1	Yes
Roborock Xiaowa E Series Vacuum v2	miio:unsupported	roborock.vacuum.e2	No
Mi Robot Vacuum 1S	miio:vacuum	roborock.vacuum.m1s	Yes
Roborock P5	miio:vacuum	roborock.vacuum.p5	Yes
Roborock S4	miio:vacuum	roborock.vacuum.s4	Yes
Roborock Vacuum S4v2	miio:vacuum	roborock.vacuum.s4v2	Yes
Roborock S5	miio:vacuum	roborock.vacuum.s5	Yes
Roborock S5 Max	miio:vacuum	roborock.vacuum.s5e	Yes
Roborock S6	miio:vacuum	roborock.vacuum.s6	Yes
Roborock T4	miio:vacuum	roborock.vacuum.t4	Yes
Roborock Vacuum T4 v2	miio:vacuum	roborock.vacuum.t4v2	Yes
Roborock Vacuum T4 v3	miio:vacuum	roborock.vacuum.t4v3	Yes
Roborock T6	miio:vacuum	roborock.vacuum.t6	Yes
Roborock Vacuum T6 v2	miio:vacuum	roborock.vacuum.t6v2	Yes
Roborock Vacuum T6 v3	miio:vacuum	roborock.vacuum.t6v3	Yes
Roborock Vacuum T7	miio:vacuum	roborock.vacuum.t7	Yes
Roborock Vacuum T7p	miio:vacuum	roborock.vacuum.t7p	Yes
Roborock Vacuum T7 v2	miio:vacuum	roborock.vacuum.t7pv2	Yes
Roborock Vacuum T7 v3	miio:vacuum	roborock.vacuum.t7pv3	Yes
Roborock Vacuum T7 v2	miio:vacuum	roborock.vacuum.t7v2	Yes
Roborock Vacuum T7 v3	miio:vacuum	roborock.vacuum.t7v3	Yes
Roborock Vacuum S6	miio:vacuum	rockrobo.vacuum.s6	Yes
Mi Robot Vacuum	miio:vacuum	rockrobo.vacuum.v1	Yes
ROIDMI EVE vacuum	miio:basic	roidmi.vacuum.v60	Yes
PTX OneKey Switch (WIFI)	miio:basic	090615.switch.xswitch01	Yes
PTX Twokey switch(wifi)	miio:basic	090615.switch.xswitch02	Yes
PTX ThreeKey Switch (WIFI)	miio:basic	090615.switch.xswitch03	Yes
SCISHARE Smart Capsule Coffee Machine	miio:basic	scishare.coffee.s1102	Experimental	This device does not allow for regular querying for the status. Hence the status is not updated for the action channels. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Scishare Smart Capsule Coffee Machine	miio:basic	scishare.coffee.s1301	Experimental	This device does not allow for regular querying for the status. Hence the status is not updated for the action channels. Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Soocare Electric Toothbrush	miio:unsupported	soocare.toothbrush.x3	No
Viomi Internet Refrigerator iLive(French style 462L)	miio:unsupported	viomi.fridge.v3	No
Viomi Cleaning Robot V-RVCLM21B	miio:basic	viomi.vacuum.v6	Yes
Mi Robot Vacuum-Mop P	miio:basic	viomi.vacuum.v7	Yes
Mi Robot Vacuum-Mop P	miio:basic	viomi.vacuum.v8	Yes
Viomi S9	miio:basic	viomi.vacuum.v18	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Internet Electric Water Heater 1A (60L)	miio:basic	viomi.waterheater.e1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP)	miio:basic	xiaomi.aircondition.ma1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1)	miio:basic	xiaomi.aircondition.ma2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Vertical Air Conditioner (2HP)	miio:basic	xiaomi.aircondition.ma4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1)	miio:basic	xiaomi.aircondition.ma5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3)	miio:basic	xiaomi.aircondition.ma6	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1)	miio:basic	xiaomi.aircondition.ma9	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mc1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mc2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1)	miio:basic	xiaomi.aircondition.mc4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1)	miio:basic	xiaomi.aircondition.mc5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1)	miio:basic	xiaomi.aircondition.mc6	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1)	miio:basic	xiaomi.aircondition.mc7	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3)	miio:basic	xiaomi.aircondition.mc8	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3)	miio:basic	xiaomi.aircondition.mc9	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.c10	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.c11	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mh1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mh2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3)	miio:basic	xiaomi.aircondition.mh3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt7	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1)	miio:basic	xiaomi.aircondition.mt8	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Wi-Fi Repeater 2	miio:unsupported	xiaomi.repeater.v2	No
Mi Network Speaker	miio:unsupported	xiaomi.wifispeaker.v1	No
Uclean Smart Toilet Seat	miio:basic	xjx.toilet.pro	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet pure	miio:basic	xjx.toilet.pure	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet relax	miio:basic	xjx.toilet.relax	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Whale Spout Smart Toilet Zero	miio:basic	xjx.toilet.zero	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Bath Heater	miio:unsupported	yeelight.bhf_light.v2	No
Yeelight Smart Bath Heater Pro	miio:basic	yeelink.bhf_light.v1	Yes
Yeelight Smart Bath Heater	miio:basic	yeelink.bhf_light.v2	Yes
Mi Bedside Lamp	miio:basic	yeelink.light.bslamp1	Yes
Mi Bedside Lamp 2	miio:basic	yeelink.light.bslamp2	Yes
Yeelight Bedside Lamp II	miio:basic	yeelink.light.bslamp3	Yes
Yeelight Ceiling Light	miio:basic	yeelink.light.ceiling1	Yes
Yeelight Ceiling Light SE	miio:basic	yeelink.light.ceiling2	Yes
Yeelight LED Ceiling Light	miio:basic	yeelink.light.ceiling3	Yes
Yeelight LED Ceiling Light	miio:basic	yeelink.light.ceiling4	Yes
Yeelight LED Ceiling Ambi Lamp	miio:basic	yeelink.light.ceiling4.ambi	Yes
Mi LED Ceiling Light	miio:basic	yeelink.light.ceiling5	Yes
Yeelight HaoShi LED Ceiling Lamp Pro	miio:basic	yeelink.light.ceiling6	Yes
Yeelight Haoshi Ceiling Lamp	miio:basic	yeelink.light.ceiling7	Yes
LED Ceiling Light Crystal Plus	miio:basic	yeelink.light.ceiling8	Yes
Yeelight HaoShi LED Ceiling Lamp Pro	miio:basic	yeelink.light.ceiling9	Yes
Yeelight Crystal Pendant Lamp	miio:basic	yeelink.light.ceiling10	Yes
Yeelight LED Ceiling Ambi Lamp	miio:basic	yeelink.light.ceiling10.ambi	Yes
Yeelight Ceiling Light 320 1S	miio:basic	yeelink.light.ceiling11	Yes
Yeelight Stylized Ceiling Light Pro	miio:basic	yeelink.light.ceiling12	Yes
Yeelight Ceiling Light	miio:basic	yeelink.light.ceiling13	Yes
Yeelight Ceiling Light Mini	miio:basic	yeelink.light.ceiling14	Yes
Yeelight Ceiling Light 480 1S	miio:basic	yeelink.light.ceiling15	Yes
Yeelight Xingyu Ceiling Light	miio:basic	yeelink.light.ceiling16	Yes
Yeelight ShaoHua Celing Light	miio:basic	yeelink.light.ceiling17	Yes
Yeelight Ceiling Light Pro	miio:basic	yeelink.light.ceiling18	Yes
Yeelight Ceiling Light Pro	miio:basic	yeelink.light.ceiling19	Yes
Yeelight LED Ceiling Ambi Lamp	miio:basic	yeelink.light.ceiling19.ambi	Yes
Yeelight Ceiling Light	miio:basic	yeelink.light.ceiling20	Yes
Yeelight LED Ceiling Ambi Lamp	miio:basic	yeelink.light.ceiling20.ambi	Yes
Mi Smart LED Living Room Ceiling Light	miio:basic	yeelink.light.ceiling21	Yes
Mi Smart LED Ceiling Light	miio:basic	yeelink.light.ceiling22	Yes
Mi Smart LED Ceiling Light (350mm)	miio:basic	yeelink.light.ceiling23	Yes
Yeelight Jade Smart LED Ceiling Light C2001	miio:basic	yeelink.light.ceil26	Yes
Yeelight Color Bulb	miio:basic	yeelink.light.color1	Yes
Yeelight LED Bulb (Color)	miio:basic	yeelink.light.color2	Yes
Mi LED Smart Bulb (White and Color)	miio:basic	yeelink.light.color3	Yes
Yeelight LED Bulb 1S（Color）	miio:basic	yeelink.light.color4	Yes
Mi Smart LED Bulb Essential (White and Color)	miio:basic	yeelink.light.color5	Yes
Yeelight Smart LED Bulb 1SE (color)	miio:basic	yeelink.light.colora	Yes
Yeelight LED Bulb (Tunable)	miio:basic	yeelink.light.ct2	Yes
Mi LED Desk Lamp	miio:basic	yeelink.light.lamp1	Yes
Mi Smart LED Desk Lamp Pro	miio:basic	yeelink.light.lamp2	Yes
Yeelight LED Lamp	miio:basic	yeelink.light.lamp3	Yes
Mi LED Desk Lamp 1S	miio:basic	yeelink.light.lamp4	Yes
Yeelight Smart Desk Lamp Prime	miio:basic	yeelink.light.lamp5	Yes
Yeelight	miio:basic	yeelink.light.lamp6	Yes
Yeelight LED Light Sensor Desk Lamp V1	miio:basic	yeelink.light.lamp7	Yes
Yeelight	miio:basic	yeelink.light.lamp8	Yes
Yeelight Star LED Table Lamp	miio:basic	yeelink.light.lamp9	Yes
Yeelight Star Floor Lamp	miio:basic	yeelink.light.lamp10	Yes
Yeelight Screen Light Bar	miio:basic	yeelink.light.lamp15	Yes
Yeelight Bulb	miio:basic	yeelink.light.mono1	Yes
Yeelight White Bulb v2	miio:basic	yeelink.light.mono2	Yes
Yeelight LED Bulb 1S（Dimmable）	miio:basic	yeelink.light.mono4	Yes
Yeelight LED Filament Bulb	miio:basic	yeelink.light.mono5	Yes
Mi Smart LED Bulb	miio:basic	yeelink.light.mono6	Yes
Yeelight LED smart bulb W3(dimmable)	miio:basic	yeelink.light.monoa	Yes
Yeelight GU10 Smart Bulb W1(dimmable)	miio:basic	yeelink.light.monob	Yes
Yeelight Whiteglow Panel Light	miio:basic	yeelink.light.panel1	Yes
Yeelight Lightstrip	miio:basic	yeelink.light.strip1	Yes
Yeelight Lightstrip Plus	miio:basic	yeelink.light.strip2	Yes
Yeelight Willow LED Lightstrip	miio:basic	yeelink.light.strip4	Yes
Light Group (Mi & Yeelight)	miio:basic	yeelink.light.virtual	Yes
Yeelight Smart Dual Control Module	miio:basic	yeelink.switch.sw1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Speaker	miio:unsupported	yeelink.wifispeaker.v1	No
Yilai Ceiling Light Aiyue 480	miio:basic	yilai.light.ceiling1	Yes
Yilai Ceiling Lamp Hefeng 430	miio:basic	yilai.light.ceiling2	Yes
Yilai Ceiling Lamp Hefeng Pro	miio:basic	yilai.light.ceiling3	Yes
Mi Water Purifier lx2	miio:basic	yunmi.waterpuri.lx2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter)	miio:basic	yunmi.waterpuri.lx3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx4	miio:basic	yunmi.waterpuri.lx4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 1A/400G Pro	miio:basic	yunmi.waterpuri.lx5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter)	miio:basic	yunmi.waterpuri.lx6	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 500G/500G Pro	miio:basic	yunmi.waterpuri.lx7	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 600G	miio:basic	yunmi.waterpuri.lx8	Yes
Mi Water Purifier D1	miio:basic	yunmi.waterpuri.lx9	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx10	miio:basic	yunmi.waterpuri.lx10	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier C1 (Triple Setting)	miio:basic	yunmi.waterpuri.lx11	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier S1	miio:basic	yunmi.waterpuri.lx12	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v1	miio:basic	yunmi.waterpurifier.v1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v2	miio:basic	yunmi.waterpurifier.v2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under sink) v3	miio:basic	yunmi.waterpurifier.v3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v4	miio:basic	yunmi.waterpurifier.v4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Ventilation System	miio:basic	zhimi.airfresh.va2	Yes
Smartmi Fresh Air System (Heating)	miio:basic	zhimi.airfresh.va4	Yes
Mi Fresh Air Ventilator C1-80	miio:basic	zhimi.airfresh.ua1	Yes
Mi PM2.5 Air Quality Monitor	miio:basic	zhimi.airmonitor.v1	Yes
Xiaomi Smart Air Purifier 4 Compact	miio:basic	zhimi.airp.cpa4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3C	miio:basic	zhimi.airp.mb4a	Yes
Xiaomi Smart Air Purifier 4	miio:basic	zhimi.airp.mb5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 2 (mini)	miio:basic	zhimi.airpurifier.m1	Yes
Mi Air Purifier 2	miio:basic	zhimi.airpurifier.m2	Yes
Mi Air Purifier 2S	miio:basic	zhimi.airpurifier.ma1	Yes
Mi Air Purifier 2S	miio:basic	zhimi.airpurifier.ma2	Yes
Mi Air Purifier 3	miio:basic	zhimi.airpurifier.ma4	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 2S	miio:basic	zhimi.airpurifier.mb1	Yes
Mi Air Purifier 3/3H	miio:basic	zhimi.airpurifier.mb3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3C	miio:basic	zhimi.airpurifier.mb4	Yes
Mi Air Purifier 2S	miio:basic	zhimi.airpurifier.mc1	Yes
Mi Air Purifier 2H	miio:basic	zhimi.airpurifier.mc2	Yes
Mi Air Purifier Super	miio:basic	zhimi.airpurifier.sa1	Yes
Mi Air Purifier MAX / MAX Pro	miio:basic	zhimi.airpurifier.sa2	Yes
Mi Air Purifier v1	miio:basic	zhimi.airpurifier.v1	Yes
Mi Air Purifier v2	miio:basic	zhimi.airpurifier.v2	Yes
Mi Air Purifier v3	miio:basic	zhimi.airpurifier.v3	Yes
Mi Air Purifier v5	miio:basic	zhimi.airpurifier.v5	Yes
Mi Air Purifier Pro v6	miio:basic	zhimi.airpurifier.v6	Yes
Mi Air Purifier Pro v7	miio:basic	zhimi.airpurifier.v7	Yes
Mi Air Purifier Pro H	miio:basic	zhimi.airpurifier.vb2	Yes
Mi Air Purifier virtual	miio:unsupported	zhimi.airpurifier.virtual	No
Mi Air Purifier 2(Virtual)	miio:unsupported	zhimi.airpurifier.vtl_m1	No
Smartmi Air Purifier	miio:basic	zhimi.airpurifier.za1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Standing Fan	miio:basic	zhimi.fan.sa1	Yes
Mi Smart Fan	miio:basic	zhimi.fan.v1	Yes
Smartmi DC Pedestal Fan	miio:basic	zhimi.fan.v2	Yes
Smartmi DC Pedestal Fan	miio:basic	zhimi.fan.v3	Yes
Smartmi Inverter Pedestal Fan	miio:basic	zhimi.fan.za1	Yes
Smartmi Standing Fan 2	miio:basic	zhimi.fan.za3	Yes
Smartmi Standing Fan 2S	miio:basic	zhimi.fan.za4	Yes
Smartmi Standing Fan 3	miio:basic	zhimi.fan.za5	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater S	miio:basic	zhimi.heater.ma2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Baseboard Heater E	miio:basic	zhimi.heater.ma3	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater S	miio:basic	zhimi.heater.mc2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fan	miio:basic	zhimi.heater.na1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fan Heater	miio:basic	zhimi.heater.nb1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Radiant Heater Smart Version	miio:basic	zhimi.heater.za1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1S	miio:basic	zhimi.heater.za2	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1S	miio:basic	zhimi.heater.zb1	Experimental	Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Evaporative Humidifier	miio:basic	zhimi.humidifier.ca1	Yes
Smartmi Evaporative Humidifer 2	miio:basic	zhimi.humidifier.ca4	Yes
Smartmi Evaporative Humidifier	miio:basic	zhimi.humidifier.cb1	Yes
Smartmi Evaporative Humidifier	miio:basic	zhimi.humidifier.cb2	Yes
Smartmi Humidifier	miio:basic	zhimi.humidifier.v1	Yes
Mi AI Alarm	miio:unsupported	zimi.clock.myk01	No
Mi Smart Power Strip	miio:basic	zimi.powerstrip.v2	Yes

note: Supported means we received feedback from users this device is working with the binding. For devices with experimental support, we did not yet confirmation that channels are correctly working. Please feedback your findings for these devices (e.g. Are all channels working, do they contain the right information, is controlling the devices working etc.)

Channels

Depending on the device, different channels are available.

All devices have available the following channels (marked as advanced) besides the device specific channels

Channel	Type	Description
network#ssid	String	Network SSID
network#bssid	String	Network BSSID
network#rssi	Number	Network RSSI
network#life	Number	Network Life
actions#commands	String	send commands direct. see below
actions#rpc	String	send commands via cloud. see below

note: the ADVANCED actions#commands and actions#rpc channels can be used to send commands that are not automated via the binding. This is available for all devices e.g. openhab:send actionCommand 'upd_timer["1498595904821", "on"]' would enable a pre-configured timer. See https://github.com/marcelrv/XiaomiRobotVacuumProtocol (opens new window) for all known available commands.

Robo Rock vacuum Channels

Type	Channel	Description
Number	status#segment_status	Segment Status
Number	status#map_status	Map Box Status
Number	status#led_status	Led Box Status
String	info#carpet_mode	Carpet Mode details
String	info#fw_features	Firmware Features
String	info#room_mapping	Room Mapping details
String	info#multi_maps_list	Maps Listing details

Additionally depending on the capabilities of your robot vacuum other channels may be enabled at runtime

Type	Channel	Description
Switch	status#water_box_status	Water Box Status
Switch	status#lock_status	Lock Status
Number	status#water_box_mode	Water Box Mode
Switch	status#water_box_carriage_status	Water Box Carriage Status
Switch	status#mop_forbidden_enable	Mop Forbidden
Switch	status#is_locating	Robot is locating
Number	actions#segment	Room Clean (enter room #)

Note: cleaning map is only available with cloud access.

There are several advanced channels, which may be useful in rules (e.g. for individual room cleaning etc) In case your vacuum does not support one of these commands, it will show "unsupported_method" for string channels or no value for numeric channels.

Advanced: Vacuum Map Customization

In case the default rendering of the vacuum map is not meeting your integration needs, the rendering can be tailored. The way to customize this is to create a file with the name mapConfig.json in the userdata/miio folder. If the binding finds this file it will read the map rendering preferences from there. If the file is available but invalid json, it will create a new file with all the default values for you to customize. This allows you to control the colors, if logo is displayed, if and what text is rendered etc. To (re-)read the file either restart openHAB, restart the binding or alternatively edit the thing and make (any) minor change. Note, cropping is disabled (hence showing like the maps in OH3.1 and earlier) for any cropBorder value < 0. Note, not all the values need to be in the json file, e.g. a subset of the parameters also works, the parameters not in the mapConfig.json will take the default values.

Mi Air Frying Pan (careli.fryer.maf01) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
status	Number	Air Fryer - Status	Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault	Number	Air Fryer - Device Fault	Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time	Number:Time	Air Fryer - Target Time
target_temperature	Number:Temperature	Air Fryer - Target Temperature
left_time	Number:Time	Air Fryer - Left Time
recipe_id	String	Custom - Recipe Id
recipe_name	String	Custom - Recipe Name
work_time	Number:Time	Custom - Work Time
work_temp	Number:Temperature	Custom - Work Temp
appoint_time	Number:Time	Custom - Appoint Time
food_quantity	Number	Custom - Food Quantity	Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch	Number	Custom - Preheat Switch	Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left	Number:Time	Custom - Appoint Time Left
recipe_sync	String	Custom - Recipe Sync
turn_pot	Number	Custom - Turn Pot	Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-custom-cook"="Custom Start Custom Cook","custom-resume-cooking"="Custom Resume Cooking"]
status	Number	Air Fryer - Status	Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault	Number	Air Fryer - Device Fault	Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time	Number:Time	Air Fryer - Target Time
target_temperature	Number:Temperature	Air Fryer - Target Temperature
left_time	Number:Time	Air Fryer - Left Time
recipe_id	String	Custom - Recipe Id
work_time	Number:Time	Custom - Work Time
work_temp	Number:Temperature	Custom - Work Temp
appoint_time	Number:Time	Custom - Appoint Time
food_quantity	Number	Custom - Food Quantity	Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch	Number	Custom - Preheat Switch	Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left	Number:Time	Custom - Appoint Time Left
turn_pot	Number	Custom - Turn Pot	Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

Mi Air Frying Pan (careli.fryer.maf03) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
status	Number	Air Fryer - Status	Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault	Number	Air Fryer - Device Fault	Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time	Number:Time	Air Fryer - Target Time
target_temperature	Number:Temperature	Air Fryer - Target Temperature
left_time	Number:Time	Air Fryer - Left Time
recipe_id	String	Custom - Recipe Id
recipe_name	String	Custom - Recipe Name
work_time	Number:Time	Custom - Work Time
work_temp	Number:Temperature	Custom - Work Temp
appoint_time	Number:Time	Custom - Appoint Time
food_quantity	Number	Custom - Food Quantity	Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch	Number	Custom - Preheat Switch	Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left	Number:Time	Custom - Appoint Time Left
recipe_sync	String	Custom - Recipe Sync
turn_pot	Number	Custom - Turn Pot	Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

Qingping Air Monitor Lite (cgllc.airm.cgdn1) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["settings-set-start-time"="Set Start Time","settings-set-end-time"="Set End Time","settings-set-frequency"="Set Frequency","settings-set-screen-off"="Set Screen Off","settings-set-device-off"="Set Device Off","settings-set-temp-unit"="Set Temp Unit"]
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
pm2_5_density	Number:Density	Environment - PM2 5 Density
pm10_density	Number:Density	Environment - PM10 Density
temperature	Number:Temperature	Environment - Temperature
co2_density	Number:Density	Environment - CO2 Density
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
voltage	Number:ElectricPotential	Battery - Voltage
mac	String	Mac - Mac
monitoring_frequency	Number:Time	Settings - Monitoring Frequency	Value mapping ["1"="Second","60"="Second","300"="Second","600"="Second","0"="Null"]
screen_off	Number:Time	Settings - Screen Off	Value mapping ["15"="Second","30"="Second","60"="Second","300"="Second","0"="Null"]
device_off	Number:Time	Settings - Device Off	Value mapping ["15"="Minute","30"="Minute","60"="Minute","0"="Null"]
tempature_unit	String	Settings - Tempature Unit

Mi Multifunction Air Monitor (cgllc.airmonitor.b1) Channels

Channel	Type	Description	Comment
battery	Number	Battery
pm25	Number	PM2.5
co2	Number	CO2e
tvoc	Number	tVOC
humidity	Number:Dimensionless	Humidity
temperature	Number:Temperature	Temperature

Qingping Air Monitor (cgllc.airmonitor.s1) Channels

Channel	Type	Description	Comment
battery	Number	Battery	The device with firmware "4.1.8_9999" stops recognizing parameter "battery" in "get_value" command. The "battery" value request was extracted to separate command in order to keep backward compatibility to the devices with older firmware.
pm25	Number	PM2.5
co2	Number	CO2
tvoc	Number	tVOC
humidity	Number:Dimensionless	Humidity
temperature	Number:Temperature	Temperature

Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) Channels

Channel	Type	Description	Comment
on	Switch	Power
temperature	Number:Temperature	Temperature
working-time	Number:Time	Working Time
on1	Switch	Indicator Light - Switch Status
power-consumption	Number:Energy	Daily Power Consumption
electric-current	Number:Current	Power Consumption - Electric Current
voltage	Number:ElectricPotential	Power Consumption - Voltage
electric-power	Number:Power	Current Power Consumption - Electric Power
on-duration	Number:Time	Imilab Timer - On Duration
off-duration	Number:Time	Imilab Timer - Off Duration
countdown	Number:Time	Imilab Timer - Countdown
task-switch	Switch	Imilab Timer - Task Switch
countdown-info	Switch	Imilab Timer - Countdown Info
bt-gw	String	BT Gateway	Value mapping ["disable"="Disable","enable"="Enable"]
bt-gw-devices	String	Connected BT Gateway Devices	Note, refreshes every 2nd refresh. Channel requires cloud connectivity to function. Sample widget to visualise the (json) output available from the widget market

Mi Smart Plug WiFi (chuangmi.plug.hmi205) Channels

Channel	Type	Description	Comment
power	Switch	Power
temperature	Number:Temperature	Temperature
led	Switch	Indicator light

Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) Channels

Channel	Type	Description	Comment
power	Switch	Power	If this channel does not respond to on/off upgrade firmware
usb	Switch	USB
temperature	Number:Temperature	Temperature
led	Switch	Wifi LED

Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) Channels

Channel	Type	Description	Comment
power	Switch	Power	If this channel does not respond to on/off upgrade firmware
usb	Switch	USB
temperature	Number:Temperature	Temperature
led	Switch	Wifi LED

Mi Plug Mini (chuangmi.plug.m1) Channels

Channel	Type	Description	Comment
power	Switch	Power
temperature	Number:Temperature	Temperature
led	Switch	Indicator light

Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) Channels

Channel	Type	Description	Comment
power	Switch	Power
temperature	Number:Temperature	Temperature
led	Switch	Indicator light

Mi Smart Power Plug (chuangmi.plug.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
usb	Switch	USB
temperature	Number:Temperature	Temperature

Mi Smart Power Plug v2 (chuangmi.plug.v2) Channels

Channel	Type	Description	Comment
power	Switch	Power
usb	Switch	USB

MIJIA Smart Plug Enhanced (chuangmi.plug.v3) Channels

Channel	Type	Description	Comment
power	Switch	Power	If this channel does not respond to on/off upgrade firmware
usb	Switch	USB
temperature	Number:Temperature	Temperature
led	Switch	Wifi LED

Gosund Smart Plug (cuco.plug.cp1) Channels

Channel	Type	Description	Comment
FirmwareRevision	String	Device Information-CurrentFirmware Version
Manufacturer	String	Device Information-Device Manufacturer
Model	String	Device Information-Device Model
SerialNumber	String	Device Information-Device Serial Number
On	Switch	Switch-Switch Status

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	Number	Mode	Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity	Number:Dimensionless	Humidity
humidity_set	Number:Dimensionless	Humidity Setting
led	Switch	LED indicator Light
sound	Switch	Notification Sounds
watertankstatus	Number	Watertank Status

Mi S Smart Humidifer (deerma.humidifier.jsq1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	Number	Mode	Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity	Number:Dimensionless	Humidity
humidity_set	Number:Dimensionless	Humidity Setting
led	Switch	LED indicator Light
sound	Switch	Notification Sounds
watertankstatus	Number	Watertank Status
wet_and_protect	Switch	Wet and Protect

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) Channels

Channel	Type	Description	Comment
on	Switch	Humidifier - Switch Status
fault	Number	Humidifier - Device Fault	Value mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Separation"]
fan_level	Number	Humidifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Humidity"]
target_humidity	Number:Dimensionless	Humidifier - Target Humidity
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
water_shortage_fault	Switch	Custom - Water Shortage Fault
the_tank_filed	Switch	Custom - The Tank Filed

Mi Smart Humidifer S (deerma.humidifier.jsqs) Channels

Channel	Type	Description	Comment
on	Switch	Humidifier - Switch Status
fault	Number	Humidifier - Device Fault	Value mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Separation"]
fan_level	Number	Humidifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Humidity"]
target_humidity	Number:Dimensionless	Humidifier - Target Humidity
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
water_shortage_fault	Switch	Custom - Water Shortage Fault
the_tank_filed	Switch	Custom - The Tank Filed

Mi Smart Humidifier (deerma.humidifier.mjjsq) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	Number	Mode	Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity	Number:Dimensionless	Humidity
humidity_set	Number:Dimensionless	Humidity Setting
led	Switch	LED indicator Light
sound	Switch	Notification Sounds
watertankstatus	Number	Watertank Status

Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) Channels

Channel	Type	Description	Comment
power	Switch	Power
airFreshMode	String	Mode	Value mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
airFreshPTCPower	Switch	PTC
airFreshPTCStatus	Switch	PTC Status
airFreshDisplay	Switch	Display
airFreshChildLock	Switch	Child Lock
airFreshSound	Switch	Sound
airFreshPM25	Number	PM2.5
airFreshCO2	Number	CO2
airFreshCurrentSpeed	Number	Current Speed
airFreshFavoriteSpeed	Number	Favorite Speed
airFreshTemperature	Number	Temperature Outside
airFreshFilterPercents	Number	Filter Percents Remaining
airFreshFilterDays	Number	Filter Days Remaining
airFreshResetFilterA1	String	Reset Filter

Mi Fresh Air Ventilator (dmaker.airfresh.t2017) Channels

Channel	Type	Description	Comment
power	Switch	Power
airFreshMode	String	Mode	Value mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
airFreshPTCPower	Switch	PTC
airFreshPtcLevel	String	PTC Level	Value mapping ["low"="Low","medium"="Medium","high"="High"]
airFreshPTCStatus	Switch	PTC Status
airFreshDisplayDirection	String	Screen direction	Value mapping ["forward"="Normal","left"="Left","right"="Right"]
airFreshDisplay	Switch	Display
airFreshChildLock	Switch	Child Lock
airFreshSound	Switch	Sound
airFreshPM25	Number	PM2.5
airFreshCO2	Number	CO2
airFreshCurrentSpeed	Number	Current Speed
airFreshFavoriteSpeed	Number	Favorite Speed
airFreshTemperature	Number	Temperature Outside
airFreshFilterPercents	Number	Filter Percents Remaining
airFreshFilterDays	Number	Filter Days Remaining
airFreshFilterProPercents	Number	Filter Pro Percents Remaining
airFreshFilterProDays	Number	Filter Pro Days Remaining
airFreshResetFilter	String	Reset Filter

Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["fan-toggle"="Fan Toggle"]
On	Switch	Fan - Switch Status
FanLevel	Number	Fan-Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
HorizontalSwing	Switch	Fan-Horizontal Swing
Mode	Number	Fan-Mode	Value mapping ["0"="Straight Wind","1"="Sleep"]
OffDelayTime	Number:Time	Fan-Power Off Delay Time
Alarm	Switch	Fan-Alarm
Brightness	Switch	Fan-Brightness
PhysicalControlsLocked	Switch	Physical Control Locked-Physical Control Locked

Mi Smart Standing Fan 1X (dmaker.fan.p5) Channels

Channel	Type	Description	Comment
power	Switch	Power
roll	Switch	Rotation
mode	Number	Mode
angle	Number	Angle
timer	Number	Timer
beep	Switch	Beep Sound
light	Number	Light
child_lock	Switch	Child Lock
speed	Number	Speed

Mi Smart Standing Fan 1C (dmaker.fan.p8) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["fan-toggle"="Fan Toggle"]
On	Switch	Fan - Switch Status
FanLevel	Number	Fan-Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
HorizontalSwing	Switch	Fan-Horizontal Swing
Mode	Number	Fan-Mode	Value mapping ["0"="Straight Wind","1"="Sleep"]
OffDelayTime	Number:Time	Fan-Power Off Delay Time
Alarm	Switch	Fan-Alarm
Brightness	Switch	Fan-Brightness
PhysicalControlsLocked	Switch	Physical Control Locked-Physical Control Locked

Mi Smart Tower Fan (dmaker.fan.p9) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["fan-toggle"="Fan Toggle"]
On	Switch	Fan-Switch Status
FanLevel	Number	Fan-Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
Mode	Number	Fan-Mode	Value mapping ["0"="Straight Wind","1"="Natural Wind","2"="Sleep"]
HorizontalSwing	Switch	Fan-Horizontal Swing
HorizontalAngle	Number	Fan-Horizontal Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
Alarm	Switch	Fan-Alarm
OffDelayTime	Number:Time	Fan - Power Off Delay Time
Brightness	Switch	Fan-Brightness
MotorControl	Number	Fan-Motor Control
SpeedLevel	Number	Fan-Speed Level
PhysicalControlsLocked	Switch	Physical Control Locked-Physical Control Locked

Mi Smart Standing Fan 2 (dmaker.fan.p10) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["fan-toggle"="Fan Toggle"]
On	Switch	Fan-Switch Status
FanLevel	Number	Fan-Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
Mode	Number	Fan-Mode	Value mapping ["0"="Straight Wind","1"="Natural Wind","2"="Sleep"]
HorizontalSwing	Switch	Fan-Horizontal Swing
HorizontalAngle	Number	Fan-Horizontal Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
Alarm	Switch	Fan-Alarm
OffDelayTime	Number:Time	Fan - Power Off Delay Time
Brightness	Switch	Fan-Brightness
MotorControl	Number	Fan-Motor Control
SpeedLevel	Number	Fan-Speed Level
PhysicalControlsLocked	Switch	Physical Control Locked-Physical Control Locked

Mi Smart Standing Fan Pro (dmaker.fan.p15) Channels

Channel	Type	Description	Comment
on	Switch	Fan - Switch Status
fan_level	Number	Fan - Gear Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
mode	Number	Fan - Mode	Value mapping ["0"="Straight Wind","1"="Natural Wind"]
horizontal_swing	Switch	Fan - Horizontal Swing
horizontal_angle	Number	Fan - Horizontal Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
status	Number	Fan - Status
on1	Switch	Indicator Light - Switch Status
alarm	Switch	Alarm - Alarm
fault	Number	Motor Controller - Device Fault	Value mapping ["0"="No Faults"]
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
off_delay_time	Number:Time	Off Delay Time - Off Delay Time
actions	String	Actions	Value mapping ["off-delay-time-toggle"="Off Delay Time Toggle"]

Mi Smart Standing Fan 2 (dmaker.fan.p18) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["fan-toggle"="Fan Toggle"]
on	Switch	Fan - Switch Status
fan_level	Number	Fan - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
mode	Number	Fan - Mode	Value mapping ["0"="Straight Wind","1"="Natural Wind"]
horizontal_swing	Switch	Fan - Horizontal Swing
horizontal_angle	Number	Fan - Horizontal Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
off_delay_time	Number:Time	Fan - Power Off Delay Time
brightness	Switch	Fan - Brightness
alarm	Switch	Fan - Alarm
motor_control	Number	Fan - Motor Control	Value mapping ["0"="NO","1"="LEFT","2"="RIGHT"]
speed_level	Number	Fan - Speed Level
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked

Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	Value mapping ["vacuum"="Vacuum","stop"="Stop","sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock"]
BatteryLevel	Number	Battery-Battery Level
ChargingState	Number	Battery-Charging State	Value mapping ["1"="Charging","2"="Not Charging","4"="Charging","5"="Go Charging"]
water-mode	Number	Water Mode	Value mapping ["1"="Low","2"="Medium","4"="High"]
Fault	Number	Robot Cleaner-Device Fault	Value mapping ["0"="No faults"]
Status	Number	Robot Cleaner-Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTime	Number:Time	Main Cleaning Brush-Brush Left Time
BrushLifeLevel	Number:Dimensionless	Main Cleaning Brush-Brush Life Level
FilterLifeLevel	Number:Dimensionless	Filter - Filter Life Level
FilterLeftTime	Number:Time	Filter-Filter Left Time
BrushLeftTime1	Number:Time	Side Cleaning Brush-Brush Left Time
BrushLifeLevel1	Number:Dimensionless	Side Cleaning Brush-Brush Life Level
WorkMode	Number	clean-workmode
Area	String	clean-area
Timer	String	clean-timer
Mode	Number	clean-mode	Value mapping ["0"="quiet","1"="standard","2"="medium","3"="strong"]
TotalCleanTime	Number:Time	Clean - Total Clean Time
TotalCleanTimes	Number	Clean - Total Clean Times
TotalCleanArea	Number:Area	Clean - Total Clean Area
CleanLogStartTime	Number	Clean - Clean Log Start Time
ButtonLed	Number	Clean - Button Led
TaskDone	Number	Clean - Task Done	Value mapping ["0"="in progress","1"="done"]
LifeSieve	String	Consumable - Life Sieve
LifeBrushSide	String	Consumable - Life Brush Side
LifeBrushMain	String	Consumable - Life Brush Main
Enable	Switch	Annoy - Enable
StartTime	String	Annoy - Start Time
StopTime	String	Annoy - Stop Time
MapView	String	Map - Map View
Volume	Number	Audio - Volume
VoicePackets	String	Audio - Voice Packets
TimeZone	String	Time - Time Zone

Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) Channels

Channel	Type	Description	Comment
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Faults"]
battery-level	Number	Battery - Battery Level
charging-state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush-left-time	Number:Time	Main Cleaning Brush - Brush Left Time
brush-life-level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush-left-time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush-life-level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-left-time	Number:Time	Filter - Filter Left Time
work-mode	Number	Vacuum Extend - Work Mode
cleaning-time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning-mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task-status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Status 0","1"="Status 1"]
break-point-restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet-press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
enable	Switch	Do Not Disturb - Enable
start-time	String	Do Not Disturb - Start Time
end-time	String	Do Not Disturb - End Time
volume	Number	Audio - Volume
voice-packet-id	String	Audio - Voice Packet Id
voice-change-state	String	Audio - Voice Change State
time-zone	String	Time - Time Zone
timer-clean	String	Time - Timer Clean
first-clean-time	Number	Clean Logs - First Clean Time
total-clean-time	Number:Time	Clean Logs - Total Clean Time
total-clean-times	Number	Clean Logs - Total Clean Times
total-clean-area	Number	Clean Logs - Total Clean Area
save-map-status	Number	Vslam Extend - Save Map Status	Value mapping ["0"="Off","1"="On","-1"="Not Enabled"]

Dreame Robot Vacuum D9 (dreame.vacuum.p2009) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level	Number:Dimensionless	Battery - Battery Level
charging-state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable	String	Consumables Reset	Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time	Number:Time	Main Cleaning Brush - Brush Left Time
brush-life-level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush-left-time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush-life-level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-left-time	Number:Time	Filter - Filter Left Time
work-mode	Number	Vacuum Extend - Work Mode
cleaning-time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning-mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task-status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet-press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
serial-number1	String	Vacuum Extend - Serial Number
clean-rags-tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep-sweeper-time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start-time	String	Do Not Disturb - Start Time
end-time	String	Do Not Disturb - End Time
volume	Number:Dimensionless	Audio - Volume
voice-packet-id	String	Audio - Voice Packet Id
voice-change-state	String	Audio - Voice Change State
time-zone	String	Time - Time Zone
timer-clean	String	Time - Timer Clean
first-clean-time	Number	Clean Logs - First Clean Time
total-clean-time	Number:Time	Clean Logs - Total Clean Time
total-clean-times	Number	Clean Logs - Total Clean Times
total-clean-area	Number	Clean Logs - Total Clean Area

Dreame Bot W10 (dreame.vacuum.p2027) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying","9"="Washing","10"="Go Washing","11"="Building","12"="Sweeping and Mopping","13"="Charging Completed"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task_status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data	String	Vacuum Extend - Clean Extend Data
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
remote_state	String	Vacuum Extend - Remote State
clean_rags_tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
nation_matched	String	Vacuum Extend - Nation Matched
relocation_status	Number	Vacuum Extend - Relocation Status
mop_status	Number	Vacuum Extend - Mop Status
child_lock	Number	Vacuum Extend - Child Lock	Value mapping ["0"="Close","1"="Open"]
clean_cancel	Number	Vacuum Extend - Clean Cancel
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
frame_info	String	Map - Frame Info
map_extend_data	String	Map - Map Extend Data
mult_map_state	Number	Map - Mult Map State	Value mapping ["0"="Close","1"="Open"]
mult_map_info	String	Map - Mult Map Info
volume	Number:Dimensionless	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
set_voice	String	Audio - Set Voice
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area

Dreame Bot Z10 Pro (dreame.vacuum.p2028) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer","collect-dust-start-collect"="Collect Dust Start Collect"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task_status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data	String	Vacuum Extend - Clean Extend Data
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
remote_state	String	Vacuum Extend - Remote State
clean_rags_tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
nation_matched	String	Vacuum Extend - Nation Matched
relocation_status	Number	Vacuum Extend - Relocation Status
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
frame_info	String	Map - Frame Info
map_extend_data	String	Map - Map Extend Data
mult_map_state	Number	Map - Mult Map State	Value mapping ["0"="Close","1"="Open"]
mult_map_info	String	Map - Mult Map Info
volume	Number:Dimensionless	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
set_voice	String	Audio - Set Voice
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area
auto_collect	Number	Collect Dust - Auto Collect	Value mapping ["0"="Close-auto-collect","1"="Open-auto-collect"]
clean_times	Number	Collect Dust - Clean Times
dust_enable	Number	Collect Dust - Dust Enable	Value mapping ["0"="Disable","1"="Enable"]

Dreame Bot L10 Pro (dreame.vacuum.p2029) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning_area	Number	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Removed","1"="Installed"]
task_status	Number	Vacuum Extend - Task Status
clean_extend_data	String	Vacuum Extend - Clean Extend Data
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="On","1"="Off"]
serial_number	String	Vacuum Extend - Serial Number
remote_state	String	Vacuum Extend - Remote State
clean_rags_tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
frame_info	String	Map - Frame Info
map_extend_data	String	Map - Map Extend Data
mult_map_state	Number	Map - Mult Map State	Value mapping ["0"="Close","1"="Open"]
mult_map_info	String	Map - Mult Map Info
volume	Number	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
set_voice	String	Audio - Set Voice
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area

Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level	Number:Dimensionless	Battery - Battery Level
charging-state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable	String	Consumables Reset	Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time	Number:Time	Main Cleaning Brush - Brush Left Time
brush-life-level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush-left-time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush-life-level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-left-time	Number:Time	Filter - Filter Left Time
work-mode	Number	Vacuum Extend - Work Mode
cleaning-time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning-mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task-status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet-press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
serial-number1	String	Vacuum Extend - Serial Number
clean-rags-tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep-sweeper-time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start-time	String	Do Not Disturb - Start Time
end-time	String	Do Not Disturb - End Time
volume	Number:Dimensionless	Audio - Volume
voice-packet-id	String	Audio - Voice Packet Id
voice-change-state	String	Audio - Voice Change State
time-zone	String	Time - Time Zone
timer-clean	String	Time - Timer Clean
first-clean-time	Number	Clean Logs - First Clean Time
total-clean-time	Number:Time	Clean Logs - Total Clean Time
total-clean-times	Number	Clean Logs - Total Clean Times
total-clean-area	Number	Clean Logs - Total Clean Area

Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Start Sweep","vacuum-stop-sweeping"="Stop Sweeping","battery-start-charge"="Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task_status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
serial_number	String	Vacuum Extend - Serial Number
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
volume	Number:Dimensionless	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area
save_map_status	Number	Vslam Extend - Save Map Status	Value mapping ["0"="Off","1"="On"]

MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Start Sweep","vacuum-stop-sweeping"="Stop Sweeping","battery-start-charge"="Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task_status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
serial_number	String	Vacuum Extend - Serial Number
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
volume	Number:Dimensionless	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area
save_map_status	Number	Vslam Extend - Save Map Status	Value mapping ["0"="Off","1"="On"]

MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level	Number:Dimensionless	Battery - Battery Level
charging-state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable	String	Consumables Reset	Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time	Number:Time	Main Cleaning Brush - Brush Left Time
brush-life-level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush-left-time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush-life-level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-left-time	Number:Time	Filter - Filter Left Time
work-mode	Number	Vacuum Extend - Work Mode
cleaning-time	Number:Time	Vacuum Extend - Cleaning Time
cleaning-area	Number:Area	Vacuum Extend - Cleaning Area
cleaning-mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task-status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet-press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
serial-number1	String	Vacuum Extend - Serial Number
clean-rags-tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep-sweeper-time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start-time	String	Do Not Disturb - Start Time
end-time	String	Do Not Disturb - End Time
volume	Number:Dimensionless	Audio - Volume
voice-packet-id	String	Audio - Voice Packet Id
voice-change-state	String	Audio - Voice Change State
time-zone	String	Time - Time Zone
timer-clean	String	Time - Timer Clean
first-clean-time	Number	Clean Logs - First Clean Time
total-clean-time	Number:Time	Clean Logs - Total Clean Time
total-clean-times	Number	Clean Logs - Total Clean Times
total-clean-area	Number	Clean Logs - Total Clean Area

Dreame Bot D9 Max (dreame.vacuum.p2259) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time	Number:Time	Main Cleaning Brush - Brush Left Time
brush_life_level	Number:Dimensionless	Main Cleaning Brush - Brush Life Level
brush_left_time1	Number:Time	Side Cleaning Brush - Brush Left Time
brush_life_level1	Number:Dimensionless	Side Cleaning Brush - Brush Life Level
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
work_mode	Number	Vacuum Extend - Work Mode
cleaning_time	Number:Time	Vacuum Extend - Cleaning Time
cleaning_area	Number:Area	Vacuum Extend - Cleaning Area
cleaning_mode	Number	Vacuum Extend - Cleaning Mode	Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode	Number	Vacuum Extend - Mop Mode	Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status	Number	Vacuum Extend - Waterbox Status	Value mapping ["0"="Status 0","1"="Status 1"]
task_status	Number	Vacuum Extend - Task Status	Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data	String	Vacuum Extend - Clean Extend Data
break_point_restart	Number	Vacuum Extend - Break Point Restart	Value mapping ["0"="Off","1"="On"]
carpet_press	Number	Vacuum Extend - Carpet Press	Value mapping ["0"="Off","1"="On"]
remote_state	String	Vacuum Extend - Remote State
clean_rags_tip	Number:Time	Vacuum Extend - Clean Rags Tip
keep_sweeper_time	Number:Time	Vacuum Extend - Keep Sweeper Time
faults	String	Vacuum Extend - Faults
enable	Switch	Do Not Disturb - Enable
start_time	String	Do Not Disturb - Start Time
end_time	String	Do Not Disturb - End Time
frame_info	String	Map - Frame Info
map_extend_data	String	Map - Map Extend Data
mult_map_state	Number	Map - Mult Map State	Value mapping ["0"="Close","1"="Open"]
mult_map_info	String	Map - Mult Map Info
volume	Number:Dimensionless	Audio - Volume
voice_packet_id	String	Audio - Voice Packet Id
voice_change_state	String	Audio - Voice Change State
set_voice	String	Audio - Set Voice
time_zone	String	Time - Time Zone
timer_clean	String	Time - Timer Clean
first_clean_time	Number	Clean Logs - First Clean Time
total_clean_time	Number:Time	Clean Logs - Total Clean Time
total_clean_times	Number	Clean Logs - Total Clean Times
total_clean_area	Number	Clean Logs - Total Clean Area

HUIZUO ARIES For Bedroom (huayi.light.ari013) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO ARIES For Living Room (huayi.light.aries) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO Fan Light (huayi.light.fanwy) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature
on1	Switch	Fan - Power
fan-level	Number:Dimensionless	Fan - Fan Level
motor-reverse	Switch	Fan - Motor Reverse
mode	Number	Fan - Mode	Value mapping ["1"="Normal Wind","2"="Natural Wind"]

HUIZUO Fan Light(2020) (huayi.light.fanwy2) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature
on1	Switch	Fan - Power
fan-level	Number:Dimensionless	Fan - Fan Level
mode	Number	Fan - Mode	Value mapping ["0"="Basic","1"="Natural Wind"]
time-off	Number:Time	Presets - Time Off
pre-colortemp	Number:Temperature	Presets - Pre Colortemp
pre-brightness	Dimmer	Presets - Pre Brightness
pre-speed	Number:Dimensionless	Presets - Pre Speed
reversal	Number	Presets - Reversal	Value mapping ["0"="Postitive","1"="Reverse"]
pre-custom	Number	Presets - Pre Custom	Value mapping ["0"="Switch Off","1"="Open"]
flabellum	Switch	Presets - Flabellum

HUIZUO PEGASUS For Living Room (huayi.light.peg091) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO PEGASUS For Bedroom (huayi.light.peg093) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO PISCES For Bedroom (huayi.light.pis123) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO PISCES For Living Room (huayi.light.pisces) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO TAURUS For Bedroom (huayi.light.tau023) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO TAURUS For Living Room (huayi.light.taurus) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO VIRGO For Bedroom (huayi.light.vir063) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO VIRGO For Living Room (huayi.light.virgo) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO Ceiling Light (huayi.light.wy) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

huayi.light.wy204 (huayi.light.wy204) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

HUIZUO Heating Lamp (huayi.light.wyheat) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature
on1	Switch	Heater - Power
fault	Number	Heater - Device Fault	Value mapping ["0"="No Faults"]
heat-level	Number	Heater - Heat Level
screenshow	Switch	Other - Screenshow

HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) Channels

Channel	Type	Description	Comment
on	Switch	Light - Power
brightness	Dimmer	Light - Brightness
color-temperature	Number:Temperature	Light - Color Temperature

Xiaomi Robot Vacuum-Mop 2S (ijai.vacuum.v19) Channels

Channel	Type	Description	Comment
actions	String	Robot Cleaner - Actions	Value mapping ["vacuum-start-sweep"="Start","vacuum-start-sweep-mop"="Start Sweep+Mop","vacuum-start-only-sweep"="Start Sweep","vacuum-start-only-mop"="Start Mop","vacuum-dock"="Dock","vacuum-stop-sweeping"="Pause","vacuum-start-room-sweep"="Start Room Sweep"]
advanced_actions	String	Robot Cleaner - Advanced Actions	Value mapping ["sweep-reset-consumable"="Sweep Reset Consumable","sweep-set-calibration"="Sweep Set Calibration","sweep-set-room-clean"="Sweep Set Room Clean","sweep-set-preference-clean"="Sweep Set Preference Clean","sweep-get-preference-clean"="Sweep Get Preference Clean","sweep-set-preference-type"="Sweep Set Preference Type","sweep-set-go-charging"="Sweep Set Go Charging","sweep-erase-preference"="Sweep Erase Preference","sweep-set-preference-ii"="Sweep Set Preference Ii","sweep-get-preference-ii"="Sweep Get Preference Ii","order-add"="Order Add","order-del"="Order Del","order-get"="Order Get","order-add-ii"="Order Add Ii","order-get-map-order-count"="Order Get Map Order Count","order-add-iii"="Order Add Iii","point-zone-start-point-clean"="Point Zone Start Point Clean","point-zone-pause-point-clean"="Point Zone Pause Point Clean","point-zone-start-zone-clean"="Point Zone Start Zone Clean","point-zone-pause-zone-clean"="Point Zone Pause Zone Clean","point-zone-set-beauty-wall"="Point Zone Set Beauty Wall","point-zone-set-virtual-wall"="Point Zone Set Virtual Wall","point-zone-set-zone-point"="Point Zone Set Zone Point","point-zone-start-point-clean-ii"="Point Zone Start Point Clean Ii","map-get-map-list"="Map Get Map List","map-upload-by-mapid"="Map Upload By Mapid","map-set-cur-map"="Map Set Cur Map","map-del-map"="Map Del Map","map-rename-map"="Map Rename Map","map-upload-by-maptype"="Map Upload By Maptype","map-rename-room"="Map Rename Room","map-arrange-room"="Map Arrange Room","map-split-room"="Map Split Room","map-reset-map"="Map Reset Map","map-build-new-map"="Map Build New Map","map-get-cur-path"="Map Get Cur Path","map-get-map-room-list"="Map Get Map Room List","map-upload-by-mapid-ii"="Map Upload By Mapid Ii","map-upload-by-maptype-ii"="Map Upload By Maptype Ii","map-reset-map-ii"="Map Reset Map Ii","map-build-map-ii"="Map Build Map Ii","map-set-mijia-room-list"="Map Set Mijia Room List","disturb-set-notdisturb"="Disturb Set Notdisturb","language-download-voice"="Language Download Voice","language-get-download-status"="Language Get Download Status"]
status	Number	Robot Cleaner - Status	Value mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Go Charging","4"="Charging","5"="Sweeping","6"="Sweeping and Mopping","7"="Mopping","8"="Upgrading"]
fault	Number	Robot Cleaner - Device Fault
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Sweep","1"="Sweep And Mop","2"="Mop"]
sweep_type	Number	Robot Cleaner - Sweep Type	Value mapping ["0"="Global","1"="Mop","2"="Edge","3"="Area","4"="Point","5"="Remote","6"="Explore","7"="Room","8"="Floor"]
on	String	Robot Cleaner - Switch Status
battery_level	Number:Dimensionless	Robot Cleaner - Battery Level
alarm	Switch	Robot Cleaner - Locate
volume	Number:Dimensionless	Robot Cleaner - Locate Volume
repeat_state	Switch	Sweep - Repeat State
door_state	Number	Sweep - Door State	Value mapping ["0"="None","1"="DustBox","2"="WaterBox","3"="TwoInOne"]
cloth_state	Contact	Sweep - Cloth State
suction_state	Number	Robot Cleaner - Power	Value mapping ["0"="Slient","1"="Standard","2"="Medium","3"="Turbo"]
water_state	Number	Sweep - Water State	Value mapping ["0"="Low","1"="Mid","2"="High"]
mop_route	Number	Sweep - Mop Route	Value mapping ["0"="S","1"="Y"]
side_brush_life	Number:Dimensionless	Sweep - Side Brush Life
side_brush_hours	Number:Time	Sweep - Side Brush Hours
main_brush_life	Number:Dimensionless	Sweep - Main Brush Life
main_brush_hours	Number:Time	Sweep - Main Brush Hours
hypa_life	Number:Dimensionless	Sweep - Hypa Life
hypa_hours	Number:Time	Sweep - Hypa Hours
mop_life	Number:Dimensionless	Sweep - Mop Life
mop_hours	Number:Time	Sweep - Mop Hours
direction	Number	Sweep - Direction	Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zone	Number	Sweep - Time Zone
cur_lang	String	Sweep - Cur Lang
cleaning_time	Number:Time	Sweep - Cleaning Time
cleaning_area	Number	Sweep - Cleaning Area
dirt_recognize	Switch	Sweep - Dirt Recognize
pet_recognize	Switch	Sweep - Pet Recognize
ai_recognize	Switch	Sweep - Ai Recognize
carpet_booster	Switch	Sweep - Carpet Booster
multi_prop_vacuum	String	Sweep - Multi Prop Vacuum
carpet_avoid	Switch	Sweep - Carpet Avoid
tank_shake	Switch	Sweep - Tank Shake
shake_shift	Number	Sweep - Shake Shift	Value mapping ["1"="Low","2"="Mid","3"="High"]
map_encrypt	Contact	Sweep - Map Encrypt
order_id	Number	Order - Order Id
enable	Switch	Order - Enable
day	Number:Time	Order - Day
hour	Number:Time	Order - Hour
minute	Number:Time	Order - Minute
repeat	Switch	Order - Repeat
clean_way	Number	Order - Clean Way	Value mapping ["0"="Sweep","1"="Sweep Mop","2"="Mop"]
suction	Number	Order - Suction	Value mapping ["0"="Slient","1"="Normal","2"="Medium","3"="Turbo"]
water	Number	Order - Water	Value mapping ["0"="Low","1"="Mid","2"="High"]
twice_clean	Switch	Order - Twice Clean
mapid	Number	Order - Mapid
room_count	Number	Order - Room Count
room_data	String	Order - Room Data
time_zone1	Number	Order - Time Zone
all_enable_count	String	Order - All Enable Count
zone_points	String	Point Zone - Zone Points
restrict_points	String	Point Zone - Restrict Points
target_point	String	Point Zone - Target Point
remember_state	Switch	Map - Remember State
cur_map_id	Number	Map - Cur Map Id
map_num	Number	Map - Map Num
cur_cleaning_path	String	Map - Cur Cleaning Path
build_map	Number	Map - Build Map	Value mapping ["0"="None","1"="Build","2"="Clean"]
has_new_map	Contact	Map - Has New Map
dnd_enable	Contact	Disturb - Dnd Enable
dnd_start_hour	Number:Time	Disturb - Dnd Start Hour
dnd_start_minute	Number:Time	Disturb - Dnd Start Minute
dnd_end_hour	Number:Time	Disturb - Dnd End Hour
dnd_end_minute	Number:Time	Disturb - Dnd End Minute
multi_prop_dnd	String	Disturb - Multi Prop Dnd

IKEA E27 white spectrum opal (ikea.light.led1545g12) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA E27 white spectrum clear (ikea.light.led1546g12) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA E14 white spectrum (ikea.light.led1536g5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA GU10 white spectrum (ikea.light.led1537r6) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA E27 warm white (ikea.light.led1623g12) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA GU10 warm white (ikea.light.led1650r5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

IKEA E14 warm white (ikea.light.led1649c5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) Channels

Channel	Type	Description	Comment
fault	Number	Curtain - Device Fault	Value mapping ["0"="No faults"]
motor_control	Number	Curtain - Motor Control	Value mapping ["0"="Pause","1"="Open","2"="Close","3"="auto"]
current-position	Number:Dimensionless	Curtain - Current Position
status	Number	Curtain - Status	Value mapping ["0"="Stopped","1"="Opening","2"="Closing"]
target-position	Number:Dimensionless	Curtain - Target Position
manual-enabled	Number	curtain_cfg - Manual Enabled	Value mapping ["0"="Disable","1"="Enable"]
polarity	Number	Curtain_cfg - Polarity	Value mapping ["0"="Positive","1"="Reverse"]
pos-limit	Number	curtain_cfg - Position Limit	Value mapping ["0"="Unlimit","1"="Limit"]
en_night_tip_light	Number	Curtain_cfg - En_night_tip_light	Value mapping ["0"="Disable","1"="Enable"]
run-time	Number	Curtain_cfg - Run-time
adjust_value	Number	Motor_controller - Adjust_value

Mi Air Purifier virtual (lumi.gateway.mgl03) Channels

Channel	Type	Description	Comment
telnetEnable	Switch	Enable Telnet	Access the device with telnet to further unlock developer mode. See forum
doorbellVol	Number	Doorbell Volume
gatewayVol	Number	Gateway Volume
alarmingVol	Number	Alarming Volume
doorbellPush	String	Doorbell Push

Mi smart Home Gateway Hub (lumi.gateway.mieu01) Channels

Channel	Type	Description	Comment
guard	Switch	Guard
corridor	Switch	Automatic Night Light
nightlight	Color	Night Light
rgb	Color	Colored Light
doorbell_volume	Number	Doorbell Volume
alarming_volume	Number	Alarming Volume
gateway_volume	Number	Gateway Volume
arming_time	Number:Time	Arming Time
corridor_on_time	Number:Time	Corridor on time
language	String	Voice prompt Language
zigbee_channel	String	Zigbee Channel
lumi_bind	String	Lumi_bind info
doorbell_push	String	Doorbell Push

Mi smart Home Gateway Hub v1 (lumi.gateway.v1) Channels

Channel	Type	Description	Comment
telnetEnable	Switch	Enable Telnet	Access the device with telnet to further unlock developer mode. See forum
doorbellVol	Number	Doorbell Volume
gatewayVol	Number	Gateway Volume
alarmingVol	Number	Alarming Volume
doorbellPush	String	Doorbell Push

Mi smart Home GatewayHub v2 (lumi.gateway.v2) Channels

Channel	Type	Description	Comment
telnetEnable	Switch	Enable Telnet	Access the device with telnet to further unlock developer mode. See forum
doorbellVol	Number	Doorbell Volume
gatewayVol	Number	Gateway Volume
alarmingVol	Number	Alarming Volume
doorbellPush	String	Doorbell Push

Mi smart Home Gateway Hub v3 (lumi.gateway.v3) Channels

Channel	Type	Description	Comment
telnetEnable	Switch	Enable Telnet	Access the device with telnet to further unlock developer mode. See forum
doorbellVol	Number	Doorbell Volume
gatewayVol	Number	Gateway Volume
alarmingVol	Number	Alarming Volume
doorbellPush	String	Doorbell Push

Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
colour_temperature	Number	Color Temperature

Door lock (lumi.lock.v1) Channels

Channel	Type	Description	Comment
status	String	Status
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door Lock (lumi.lock.aq1) Channels

Channel	Type	Description	Comment
status	String	Status
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door Lock S2 (lumi.lock.acn02) Channels

Channel	Type	Description	Comment
status	String	Status
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door lock S2 Pro (lumi.lock.acn03) Channels

Channel	Type	Description	Comment
status	String	Status
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) Channels

Channel	Type	Description	Comment
power	Switch	Power
load_power	Number	Load Power
en_night_tip_light	Switch	Led Light
poweroff_memory	Switch	Poweroff Memory
max_power	Number	Max Power
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data.

Mi Window and Door Sensor (lumi.sensor_magnet.v2) Channels

Channel	Type	Description	Comment
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data.

Mi Motion Sensor (lumi.sensor_motion.aq2) Channels

Channel	Type	Description	Comment
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Motion Sensor (lumi.sensor_motion.v2) Channels

Channel	Type	Description	Comment
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) Channels

Channel	Type	Description	Comment
temperature	Number:Temperature	Temperature
humidity	Number:Dimensionless	Humidity

Water Leak Sensor (lumi.sensor_wleak.aq1) Channels

Channel	Type	Description	Comment
leak	Switch	Leaking
log	String	Device Log	This channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Temperature and Humidity Sensor (lumi.weather.v1) Channels

Channel	Type	Description	Comment
temperature	Number:Temperature	Temperature
humidity	Number:Dimensionless	Humidity
pressure	Number:Pressure	pressure

Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	This channel accepts start, stop, findme and dock.
status	Number	Robot Cleaner - Status	Value mapping ["1"="Idle","2"="Sweeping","3"="Paused","4"="Error","5"="Charging","6"="Go Charging"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Faults","1"="Left-wheel-error","2"="Right-wheel-error","3"="Cliff-error","4"="Low-battery-error","5"="Bump-error","6"="Main-brush-error","7"="Side-brush-error","8"="Fan-motor-error","9"="Dustbin-error","10"="Charging-error","11"="No-wate-error","12"="Pick-up-error"]
mode	Number	Robot Cleaner - Mode	Value mapping ["1"="Auto-clean","2"="Spot-clean","3"="Wallflow-clean"]
target-water-level	Number	Robot Cleaner - Target Water Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
fan-level	Number	Robot Cleaner - Fan Level	Value mapping ["0"="Silence","1"="Stanrd","2"="Middle","3"="Enchance"]
battery-level	Number:Dimensionless	Battery - Battery Level
charging-state	Number	Battery - Charging State	Value mapping ["0"="Not-charging","1"="Charging","2"="Charging-competely"]
alarm	Switch	Alarm - Alarm
volume	Number:Dimensionless	Alarm - Volume
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter-left-time	Number:Time	Filter - Filter Left Time
brush-life-level	Number:Dimensionless	Brush Cleaner - Brush Life Level
brush-left-time	Number:Time	Brush Cleaner - Brush Left Time
brush-life-level1	Number:Dimensionless	Brush Cleaner - Brush Life Level
brush-left-time1	Number:Time	Brush Cleaner - Brush Left Time
direction_key	Number	Remote Control - Direction Key	Value mapping ["0"="direction 0","1"="direction 1","2"="direction 2","3"="direction 3","4"="direction 4"]
clean-area	Number:Area	Clean Record - Clean Area
clean_time	Number	Clean Record - Clean Time
total-clean-area	Number:Area	Clean Record - Total Clean Area
total-clean-time	Number	Clean Record - Total Clean Time
total-clean-count	Number	Clean Record - Total Clean Count
language	Number	Language - Language	Value mapping ["0"="English","1"="Chinese","2"="Spanish","3"="Russian","4"="Italian","5"="French","6"="German","7"="Korean","8"="Polish"]
not-disturb-switch	Switch	Language - Not Disturb Switch
mop-status	Number	Other Status - Mop Status	Value mapping ["0"="Mop Uninstall","1"="Mop Install"]

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) Channels

Channel	Type	Description	Comment
fault	Number	Pet Drinking Fountain - Device Fault	Value mapping ["0"="No faults"]
on	Switch	Power
mode	Number	Mode	Value mapping ["1"="Common","2"="Smart "]
filter-left-time	Number:Time	Filter - Filter Left Time
on1	Switch	Indicator Light - Switch
cotton-left-time	Number:Time	Filter Cotton - Cotton Left Time
remain-clean-time	Number:Time	Remain Clean Time - Remain Clean Time
no-water-flag	Switch	No Water Flag - No Water Flag
resetConsumable	String	Consumables Reset	Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time	Number:Time	No Water Flag - No Water Time

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) Channels

Channel	Type	Description	Comment
fault	Number	Pet Drinking Fountain - Device Fault	Value mapping ["0"="No faults"]
on	Switch	Power
mode	Number	Mode	Value mapping ["1"="Common","2"="Smart "]
filter-left-time	Number:Time	Filter - Filter Left Time
on1	Switch	Indicator Light - Switch
cotton-left-time	Number:Time	Filter Cotton - Cotton Left Time
remain-clean-time	Number:Time	Remain Clean Time - Remain Clean Time
no-water-flag	Switch	No Water Flag - No Water Flag
resetConsumable	String	Consumables Reset	Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time	Number:Time	No Water Flag - No Water Time
pump-block-flag	Switch	No Water Flag - Pump Block Flag

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) Channels

Channel	Type	Description	Comment
fault	Number	Pet Drinking Fountain - Device Fault	Value mapping ["0"="No faults"]
on	Switch	Power
mode	Number	Mode	Value mapping ["1"="Common","2"="Smart "]
filter-left-time	Number:Time	Filter - Filter Left Time
on1	Switch	Indicator Light - Switch
cotton-left-time	Number:Time	Filter Cotton - Cotton Left Time
remain-clean-time	Number:Time	Remain Clean Time - Remain Clean Time
no-water-flag	Switch	No Water Flag - No Water Flag
resetConsumable	String	Consumables Reset	Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time	Number:Time	No Water Flag - No Water Time
pump-block-flag	Switch	No Water Flag - Pump Block Flag

XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) Channels

Channel	Type	Description	Comment
fault	Number	Pet Drinking Fountain - Device Fault	Value mapping ["0"="No faults"]
on	Switch	Power
mode	Number	Mode	Value mapping ["1"="Common","2"="Smart "]
filter-left-time	Number:Time	Filter - Filter Left Time
on1	Switch	Indicator Light - Switch
cotton-left-time	Number:Time	Filter Cotton - Cotton Left Time
remain-clean-time	Number:Time	Remain Clean Time - Remain Clean Time
no-water-flag	Switch	No Water Flag - No Water Flag
resetConsumable	String	Consumables Reset	Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time	Number:Time	No Water Flag - No Water Time
pump-block-flag	Switch	No Water Flag - Pump Block Flag

MR.BOND (mrbond.airer.m1pro) Channels

Channel	Type	Description	Comment
dry	Switch	Dry
led	Switch	LED Status
motor	Number	Motor
drytime	Number	Dry Time
airer_location	Number	Airer Location
disinfect	Switch	disinfect
distime	Number	Disinfect Time

MR.BOND (mrbond.airer.m1s) Channels

Channel	Type	Description	Comment
dry	Switch	Dry
led	Switch	LED Status
motor	Number	Motor
drytime	Number	Dry Time
airer_location	Number	Airer Location
disinfect	Switch	disinfect
distime	Number	Disinfect Time

MR.BOND (mrbond.airer.m1super) Channels

Channel	Type	Description	Comment
dry	Switch	Dry
led	Switch	LED Status
motor	Number	Motor
drytime	Number	Dry Time
airer_location	Number	Airer Location
disinfect	Switch	disinfect
distime	Number	Disinfect Time

WIDETECH WDH318EFW1 Internet Dehumidifier (nwt.derh.wdh318efw1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
autohumidity	Number:Dimensionless	Auto humidity
fanspeed	Number	Fan Speed
buzzer	Switch	Buzzer
led	Switch	LED
childlock	Switch	Child Lock
humidity	Number:Dimensionless	Humidity
temperature	Number:Temperature	Temperature
tankfull	Switch	Tank Full
compressorstatus	Switch	Compressor Status
defroststatus	Switch	Defrost Status
fanst	Number	Fan St
alarm	String	Alarm

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Philips ZhiRui E27 bulb (philips.light.bulb) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
delayoff	Switch	Delay Off
toggle	Switch	Toggle

Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
delayoff	Switch	Delay Off
toggle	Switch	Toggle

Mijia Philips Color Bulb (philips.light.cbulb) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
cid	Color	Color
switchscene	Switch	Switch Scene
switch_en	Switch	Switch Enabled
delayoff	Switch	Delay Off

Philips Light (philips.light.cbulbs) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
cid	Color	Color
switchscene	Switch	Switch Scene
switch_en	Switch	Switch Enabled
delayoff	Switch	Delay Off

Philips Connected Ceiling (philips.light.ceiling) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
switchscene	Switch	Switch Scene
toggle	Switch	Toggle

Philips Light (philips.light.dcolor) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
cid	Color	Color
switchscene	Switch	Switch Scene
switch_en	Switch	Switch Enabled
delayoff	Switch	Delay Off

ZhiRui Dimmable Downlight (philips.light.dlight) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiRui Downlight (philips.light.downlight) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

Philips Wi-Fi bulb E27 White (philips.light.hbulb) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
sw	Switch	Switch
bl	Switch	Night Light
ms	Switch	MiBand Notifications
ac	Switch	Auto Ambiance
delayoff	Switch	Delay Off
mb	Switch	MiBand

Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Smart Lamp (philips.light.mono1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
scene	Number	Scene

Philips ZhiRui Bedside Lamp (philips.light.moonlight) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
gonight	Switch	Go Night
delayoff	Switch	Delay Off
toggle	Switch	Toggle

Zhirui Ceiling Lamp Black 80W (philips.light.obceil) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Black 40W (philips.light.obceim) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Black 28W (philips.light.obceis) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Mijia Philips Study Desk Lamp (philips.light.rwread) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
scene	Number	Scene
flm	Number	Follow Me
dv	Number	DV

Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
ambientPower	Switch	Ambient Power
ambientBrightness	Number	Ambient Brightness
illumination	Number	Ambient Illumination
eyecare	Switch	Eyecare
bl	Switch	Night Light

Mijia Philips Desk Lamp 2S (philips.light.sread2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
ambientPower	Switch	Ambient Power
ambientBrightness	Number	Ambient Brightness
illumination	Number	Ambient Illumination
eyecare	Switch	Eyecare
bl	Switch	Night Light

Philips Connected Lights (philips.light.virtual) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Mode
brightness	Dimmer	Brightness
cct	Number	Color Temperature
dv	Number	Delayed Turn-off
WallSceneEn	Switch	Wall Scene Enable
WallScene	String	Wall Scene
autoCct	String	Auto CCT
dimmingPeriod	Number	Dimming Period
MibandStatus	String	Mi Band Status
actions	String	Actions	Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiYi Ceiling lamp (philips.light.zyceiling) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
switchscene	Switch	Switch Scene
toggle	Switch	Toggle

Philips ZhiYi Desk Lamp (philips.light.zysread) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

Philips ZhiYi Strip (philips.light.zystrip) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
cct	Dimmer	Correlated Color Temperature
scene	Number	Scene
dv	Number	DV
switchscene	Switch	Switch Scene
delayoff	Switch	Delay Off

CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["normal"="Normal","green"="Green"]
powerUsage	Number:Power	Power Consumption
voltage	Number:ElectricPotential	Voltage
led	Switch	wifi LED
power_price	Number	Power Price
power_factor	Number	Power Factor
current	Number:ElectricCurrent	Current
elec_leakage	Number:ElectricCurrent	Electic Leakage
temperature	Number:Temperature	Temperature

ROIDMI EVE vacuum (roidmi.vacuum.v60) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","filter-reset-filter-life"="Filter Reset Filter Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","custom-find-robot"="Custom Find Robot","custom-stop-find-charge"="Custom Stop Find Charge","custom-continue-sweep"="Custom Continue Sweep","custom-start-dust"="Custom Start Dust","custom-pause"="Custom Pause","custom-pause-find-charge"="Custom Pause Find Charge","custom-continue-find-charge"="Custom Continue Find Charge","custom-update-audio"="Custom Update Audio","custom-set-voice"="Custom Set Voice","map-request-path"="Map Request Path","map-change-area-name"="Map Change Area Name","map-set-auto-area"="Map Set Auto Area","map-local-map"="Map Local Map","map-area-custom"="Map Area Custom","map-area-order"="Map Area Order","sweep-start-sweep"="Sweep Start Sweep"]
status	Number	Robot Cleaner - Status	Value mapping ["1"="Dormant","2"="Idle","3"="Paused","4"="Sweeping","5"="Go Charging","6"="Charging","7"="Error","8"="Rfctrl","9"="Fullcharge","10"="Shutdown","11"="Findchargerpause"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Faults","1"="Low Battery Find Charger","2"="Low Battery And Poweroff","3"="Wheel Trap","4"="Collision Error","5"="Tile Do Task","6"="Lidar Point Error","7"="Front Wall Error","8"="Psd Dirty","9"="Middle Brush Fatal","10"="Sid Brush","11"="Fan Speed Error","12"="Lidar Cover","13"="Garbage Box Full","14"="Garbage Box Out","15"="Garbage Box Full Out","16"="Physical Trapped","17"="Pick Up Do Task","18"="No Water Box Do Task","19"="Water Box Empty","20"="Clean Cannot Arrive","21"="Start Form Forbid","22"="Drop","23"="Kit Water Pump","24"="Find Charger Failed","25"="Low Power Clean"]
mode	Number	Robot Cleaner - Mode	Value mapping ["1"="Silent","2"="Basic","3"="Strong","4"="Full Speed","0"="Sweep"]
sweep_type	Number	Robot Cleaner - Sweep Type	Value mapping ["0"="Sweep","1"="Mop","2"="Mop And Sweep"]
on	Number	Robot Cleaner - Switch Status	Value mapping ["1"="Open"]
battery_level	Number:Dimensionless	Battery - Battery Level
charging_state	Number	Battery - Charging State	Value mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
volume	Number:Dimensionless	Speaker - Volume
mute	Switch	Speaker - Mute
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_left_time	Number:Time	Filter - Filter Left Time
brush_left_time	Number:Time	Brush Cleaner - Brush Left Time
brush_life_level	Number:Dimensionless	Brush Cleaner - Brush Life Level
brush_left_time1	Number:Time	Brush Cleaner - Brush Left Time
brush_life_level1	Number:Dimensionless	Brush Cleaner - Brush Life Level
brush_left_time2	Number:Time	Brush Cleaner - Brush Left Time
brush_life_level2	Number:Dimensionless	Brush Cleaner - Brush Life Level
mop	Switch	Custom - Mop
work_station_freq	Number	Custom - Work Station Freq
timing	String	Custom - Timing
clean_area	Number	Custom - Clean Area
uid	String	Custom - Uid
auto_boost	Switch	Custom - Auto Boost
forbid_mode	String	Custom - Forbid Mode
water_level	Number	Custom - Water Level	Value mapping ["1"="First","2"="Second","3"="Three","4"="Fourth","0"="Mop"]
total_clean_time	Number:Time	Custom - Total Clean Time
total_clean_areas	Number	Custom - Total Clean Areas
clean_counts	Number	Custom - Clean Counts
clean_time	Number:Time	Custom - Clean Time
double_clean	Switch	Custom - Double Clean
edge_sweep	Switch	Custom - Edge Sweep
led_switch	Switch	Custom - Led Switch
lidar_collision	Switch	Custom - Lidar Collision
station_key	Switch	Custom - Station Key
station_led	Switch	Custom - Station Led
current_audio	String	Custom - Current Audio
progress	String	Custom - Progress
station_type	Number	Custom - Station Type
voice_conf	String	Custom - Voice Conf
clean_path	String	Map - Clean Path
restricted_zone	String	Map - Restricted Zone
auto_area	String	Map - Auto Area
map_memory	Switch	Map - Map Memory
map_name	String	Map - Map Name
use_auto_area	Switch	Map - Use Auto Area
path_type	Number	Map - Path Type	Value mapping ["0"="Normal","1"="Y-Mopping","2"="Repeat-Mopping"]
sweep_mode	Number	Sweep - Sweep Mode	Value mapping ["1"="Total","2"="Area","3"="Curpoint","4"="Point","7"="Smart","8"="AmartArea","9"="DepthTotal","10"="AlongWall","0"="Idle"]

PTX OneKey Switch (WIFI) (090615.switch.xswitch01) Channels

Channel	Type	Description	Comment
switch1state	Number	Switch 1
switch1name	String	Switch Name 1

PTX Twokey switch(wifi) (090615.switch.xswitch02) Channels

Channel	Type	Description	Comment
switch1state	Number	Switch 1
switch2state	Number	Switch 2
switch1name	String	Switch Name 1
switch2name	String	Switch Name 2

PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) Channels

Channel	Type	Description	Comment
switch1state	Number	Switch 1
switch2state	Number	Switch 2
switch3state	Number	Switch 3
switch1name	String	Switch Name 1
switch2name	String	Switch Name 2
switch3name	String	Switch Name 3

SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) Channels

Channel	Type	Description	Comment
power	Switch	Power
Status	String	status
expresso	Number	Brew Expresso	Value is the amount of coffee in ml. 2nd parameter in the json db is the water temperature
expresso	Number	Brew Americano	Value is the amount of coffee in ml. parameters in json are cupAmount: [set by OH], coffee: 40,water: 80, temp: 90
boil	Number	Boil water	Value is the amount of water (ml) to heat. 2nd parameter in the json db is the water temperature

Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) Channels

Channel	Type	Description	Comment
power	Switch	Power
Status	String	status
expresso	Number	Brew Expresso	Value is the amount of coffee in ml. 2nd parameter in the json db is the water temperature
expresso	Number	Brew Americano	Value is the amount of coffee in ml. parameters in json are cupAmount: [set by OH], coffee: 40,water: 80, temp: 90
boil	Number	Boil water	Value is the amount of water (ml) to heat. 2nd parameter in the json db is the water temperature

Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) Channels

Channel	Type	Description	Comment
vacuumaction	Number	Vacuum Action	Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state	Number	State	Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode	Number	Clean Mode	Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state	Number	Error	Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life	Number	Battery
box_type	Number	Box type	Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type	Number	mop_type
mop_route	Number	Mop Route	Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time	Number	Clean time
s_area	Number	Clean Area
suction_grade	Number	suction_grade	Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade	Number	water_grade	Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map	Number	remember_map
has_map	Number	has_map
is_mop	Number	is_mop	Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap	Number	has_newmap

Mi Robot Vacuum-Mop P (viomi.vacuum.v7) Channels

Channel	Type	Description	Comment
vacuumaction	Number	Vacuum Action	Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state	Number	State	Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode	Number	Clean Mode	Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state	Number	Error	Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life	Number	Battery
box_type	Number	Box type	Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type	Number	mop_type
mop_route	Number	Mop Route	Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time	Number	Clean time
s_area	Number	Clean Area
suction_grade	Number	suction_grade	Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade	Number	water_grade	Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map	Number	remember_map
has_map	Number	has_map
is_mop	Number	is_mop	Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap	Number	has_newmap

Mi Robot Vacuum-Mop P (viomi.vacuum.v8) Channels

Channel	Type	Description	Comment
vacuumaction	Number	Vacuum Action	Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state	Number	State	Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode	Number	Clean Mode	Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state	Number	Error	Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life	Number	Battery
box_type	Number	Box type	Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type	Number	mop_type
mop_route	Number	Mop Route	Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time	Number	Clean time
s_area	Number	Clean Area
suction_grade	Number	suction_grade	Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade	Number	water_grade	Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map	Number	remember_map
has_map	Number	has_map
is_mop	Number	is_mop	Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap	Number	has_newmap

Viomi S9 (viomi.vacuum.v18) Channels

Channel	Type	Description	Comment
vacuumaction	String	Vacuum Action	Value mapping ["start-sweep"="Sweep","stop-sweeping"="Stop Sweep","pause"="Pause","start-charge"="Goto Dock","stop-massage"="Stop Sweep","start-mop"="Start Mop","start-only-sweep"="Start Sweep Only","start-sweep-mop"="Start Sweep Mop"]
status	Number	Robot Cleaner - Status	Value mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Go Charging","4"="Charging","5"="Sweeping","6"="Sweeping and Mopping","7"="Mopping"]
fault	Number	Robot Cleaner - Device Fault	Value mapping ["0"="No Error","1"="Low Battery Find Charge","2"="Low Bat Need Poweroff","3"="Wheel Trap","4"="Collision Error","5"="Tile Do Task","6"="Lidar Point Err","7"="Front Wall Err","8"="Along Wall Err","9"="Mid Brush Err","10"="Side Brush Err","11"="Fan Err","12"="Lidar Cover","13"="Garbage Full","14"="Garbage Out","15"="Garbage Full Out","16"="Trapped","17"="Pick Up","20"="Cannot Arrive","21"="Start From Forbid","22"="Drop","23"="Kit Water Pump","24"="Find Charge Failed","18"="Garbage Out","25"="No Mop Clean","26"="Low Battery Cant Clean"]
wdr-mode	Number	Robot Cleaner - Wide Dynamic Range Mode	Value mapping ["0"="Mode 0","1"="Mode 1","2"="Mode 2"]
door-state	Number	Robot Cleaner - Door State	Value mapping ["0"="Door 0","1"="Door 1","2"="Door 2","3"="Door 3"]
contact-state	Number	Robot Cleaner - Contact State	Value mapping ["0"="Off","1"="On"]
contact-state1	Number:Time	Robot Cleaner - Contact State
contact-state2	Number	Robot Cleaner - Contact State
mute	Number	Robot Cleaner - Mute
sweep-type	Number	Robot Cleaner - Sweep Type	Value mapping ["0"="Total","2"="Wall","3"="Zone","4"="Point","5"="Control"]
mode	Number	Robot Cleaner - Mode	Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
battery-level	Number:Dimensionless	Battery - Battery Level
repeat-state	Switch	Viomi Vacuum - Repeat State
remember-state	Switch	Viomi Vacuum - Remember State	Value mapping ["0"="关","1"="开"]
mop-route	Number	Viomi Vacuum - Mop Route	Value mapping ["0"="C-Curved","1"="Y-Route"]
side-brush-life	Number:Dimensionless	Viomi Vacuum - Side Brush Life
side-brush-hours	Number:Time	Viomi Vacuum - Side Brush Hours
main-brush-life	Number:Dimensionless	Viomi Vacuum - Main Brush Life
main-brush-hours	Number:Time	Viomi Vacuum - Main Brush Hours
hypa-life	Number:Dimensionless	Viomi Vacuum - Hypa Life
hypa-hours	Number:Time	Viomi Vacuum - Hypa Hours
mop-life	Number:Dimensionless	Viomi Vacuum - Mop Life
mop-hours	Number:Time	Viomi Vacuum - Mop Hours
suction-grade	Number	Viomi Vacuum - Suction Grade	Value mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Strong"]
water-grade	Number	Viomi Vacuum - Water Grade	Value mapping ["0"="1 Block","1"="2 Blocks","2"="3 Blocks"]
map-num	Number	Viomi Vacuum - Map Num
time-zone	Number	Viomi Vacuum - Time Zone
clean-start-time	Number:Time	Viomi Vacuum - Clean Start Time
clean-use-time	Number:Time	Viomi Vacuum - Clean Use Time
clean-area	Number	Viomi Vacuum - Clean Area
clean-map-url	String	Viomi Vacuum - Clean Map Url
clean-mode	Number	Viomi Vacuum - Clean Mode	Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
clean-way	Number	Viomi Vacuum - Clean Way	Value mapping ["0"="Sweep Floor","1"="Sweep","2"="Mop"]
cur-lang	String	Viomi Vacuum - Cur Lang
cur-map-id	Number	Viomi Vacuum - Cur Map Id
cur-map-url	String	Viomi Vacuum - Cur Map Url
last-update-time	Number:Time	Viomi Vacuum - Last Update Time
has-map	Number	Viomi Vacuum - Has Map	Value mapping ["0"="No map in memory","1"="Map in memory"]
has-newmap	Number	Viomi Vacuum - Has Newmap	Value mapping ["0"="None","1"="New","2"="Cover"]
dust-collection	Number	Viomi Vacuum - Dust Collection	Value mapping ["0"="Close","1"="Open"]
dnd-enable	Number	Order - Dnd Enable	Value mapping ["0"="Disabled","1"="Enabled"]
dnd-start-hour	Number:Time	Order - Dnd Start Hour
dnd-start-minute	Number:Time	Order - Dnd Start Minute
dnd-end-hour	Number:Time	Order - Dnd End Hour
dnd-end-minute	Number:Time	Order - Dnd End Minute
dnd-timezone	Number	Order - Dnd Timezone
timestamp	Number	Order - Timestamp
orderdata	String	Order - Orderdata
target-point	String	Point Zone - Target Point
map-type	Number	Map - Map Type	Value mapping ["0"="Upload to url0","1"="Upload to url1","2"="Upload to url2"]
map-id	Number	Map - Map Id
map-name	String	Map - Map Name
cur-cleaning-path	String	Map - Cur Cleaning Path
map-list	String	Map - Map List
oper-result	String	Map - Oper Result
auto-area-id	Number	Map - Auto Area Id
target-voice	String	Voice - Target Voice
cur-voice	String	Voice - Cur Voice
download-status	Number	Voice - Download Status	Value mapping ["0"="Free","1"="Downloading"]
download-progress	Number:Dimensionless	Voice - Download Progress

VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) Channels

Channel	Type	Description	Comment
washStatus	Number	Wash Status
velocity	Number	Velocity
waterTemp	Number:Temperature	Water Temperature
targetTemp	Number:Temperature	Target Temperature
errStatus	Number	Error Status
hotWater	Number	Hot Water
needClean	Switch	Need Clean
modeType	Number	Mode
appointStart	Number	Appoint Start
appointEnd	Number	Appoint End

Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
sleep-mode	Switch	Air Conditioner - Sleep Mode
dryer	Switch	Air Conditioner - Dryer
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) Channels

Channel	Type	Description	Comment
on	Switch	Power
mode	Number	Air Conditioner - Mode	Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature	Number:Temperature	Air Conditioner - Target Temperature
eco	Switch	Air Conditioner - Eco
heater	Switch	Air Conditioner - Heater
dryer	Switch	Air Conditioner - Dryer
sleep-mode	Switch	Air Conditioner - Sleep Mode
fan-level	Number	Fan Control - Fan Level	Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing	Switch	Fan Control - Vertical Swing
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
on1	Switch	Indicator Light - Switch Status
electricity	Number:Energy	Power consumption accumulation in kWh
elec-count	Number	Electricity - Count
clean	String	Maintenance - Clean
examine	String	Maintenance - Examine
running-duration	Number:Time	Maintenance - Running Duration
fan-percent	Number:Dimentionless	Fan Speed %
timer	String	Enhance - Timer

Uclean Smart Toilet Seat (xjx.toilet.pro) Channels

Channel	Type	Description	Comment
seat_temp	Number:Temperature	Seat Temperature
status_seatheat	Number	Seat Status
water_temp_t	Number:Temperature	Water Temperature
fan_temp	Number:Temperature	Fan Temperature
status_led	Number	Night Light

Uclean Smart Toilet pure (xjx.toilet.pure) Channels

Channel	Type	Description	Comment
seat_temp	Number:Temperature	Seat Temperature
status_seatheat	Number	Seat Status
water_temp_t	Number:Temperature	Water Temperature
fan_temp	Number:Temperature	Fan Temperature
status_led	Number	Night Light

Uclean Smart Toilet relax (xjx.toilet.relax) Channels

Channel	Type	Description	Comment
seat_temp	Number:Temperature	Seat Temperature
status_seatheat	Number	Seat Status
water_temp_t	Number:Temperature	Water Temperature
fan_temp	Number:Temperature	Fan Temperature
status_led	Number	Night Light

Whale Spout Smart Toilet Zero (xjx.toilet.zero) Channels

Channel	Type	Description	Comment
seat_temp	Number:Temperature	Seat Temperature
status_seatheat	Number	Seat Status
water_temp_t	Number:Temperature	Water Temperature
fan_temp	Number:Temperature	Fan Temperature
status_led	Number	Night Light

Yeelight Smart Bath Heater Pro (yeelink.bhf_light.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
bh_mode	String	Bath Heater mode
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
temperature	Number:Temperature	Temperature
nightlightBrightness	Number	Nightlight Brightness

Yeelight Smart Bath Heater (yeelink.bhf_light.v2) Channels

Channel	Type	Description	Comment
power	Switch	Power
bh_mode	String	Bath Heater mode
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
temperature	Number:Temperature	Temperature
nightlightBrightness	Number	Nightlight Brightness

Mi Bedside Lamp (yeelink.light.bslamp1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Mi Bedside Lamp 2 (yeelink.light.bslamp2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight Bedside Lamp II (yeelink.light.bslamp3) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight Ceiling Light (yeelink.light.ceiling1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light SE (yeelink.light.ceiling2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Light (yeelink.light.ceiling3) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Light (yeelink.light.ceiling4) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
ambientBrightness	Dimmer	Ambient Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
ambientPower	Switch	Ambient Power
ambientColor	Color	Ambient Color
ambientColorTemperature	Number	Ambient Color Temperature
customScene	String	Set Scene
ambientColorMode	Number	Ambient Color Mode
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling4.ambi) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Mi LED Ceiling Light (yeelink.light.ceiling5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight HaoShi LED Ceiling Lamp Pro (yeelink.light.ceiling6) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Haoshi Ceiling Lamp (yeelink.light.ceiling7) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

LED Ceiling Light Crystal Plus (yeelink.light.ceiling8) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight HaoShi LED Ceiling Lamp Pro (yeelink.light.ceiling9) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Crystal Pendant Lamp (yeelink.light.ceiling10) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
ambientBrightness	Dimmer	Ambient Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
ambientPower	Switch	Ambient Power
ambientColor	Color	Ambient Color
ambientColorTemperature	Number	Ambient Color Temperature
customScene	String	Set Scene
ambientColorMode	Number	Ambient Color Mode
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling10.ambi) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light 320 1S (yeelink.light.ceiling11) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Stylized Ceiling Light Pro (yeelink.light.ceiling12) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light (yeelink.light.ceiling13) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light Mini (yeelink.light.ceiling14) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light 480 1S (yeelink.light.ceiling15) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Xingyu Ceiling Light (yeelink.light.ceiling16) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight ShaoHua Celing Light (yeelink.light.ceiling17) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light Pro (yeelink.light.ceiling18) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light Pro (yeelink.light.ceiling19) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling19.ambi) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Ceiling Light (yeelink.light.ceiling20) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling20.ambi) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Mi Smart LED Living Room Ceiling Light (yeelink.light.ceiling21) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Mi Smart LED Ceiling Light (yeelink.light.ceiling22) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Mi Smart LED Ceiling Light (350mm) (yeelink.light.ceiling23) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Jade Smart LED Ceiling Light C2001 (yeelink.light.ceil26) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Color Bulb (yeelink.light.color1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight LED Bulb (Color) (yeelink.light.color2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Mi LED Smart Bulb (White and Color) (yeelink.light.color3) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight LED Bulb 1S（Color） (yeelink.light.color4) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Mi Smart LED Bulb Essential (White and Color) (yeelink.light.color5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight Smart LED Bulb 1SE (color) (yeelink.light.colora) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight LED Bulb (Tunable) (yeelink.light.ct2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Mi LED Desk Lamp (yeelink.light.lamp1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Mi Smart LED Desk Lamp Pro (yeelink.light.lamp2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight LED Lamp (yeelink.light.lamp3) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Mi LED Desk Lamp 1S (yeelink.light.lamp4) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Smart Desk Lamp Prime (yeelink.light.lamp5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight (yeelink.light.lamp6) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight LED Light Sensor Desk Lamp V1 (yeelink.light.lamp7) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight (yeelink.light.lamp8) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Star LED Table Lamp (yeelink.light.lamp9) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Star Floor Lamp (yeelink.light.lamp10) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Screen Light Bar (yeelink.light.lamp15) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number:Temperature	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
rgbColor	Color	RGB Color
ambientBrightness	Dimmer	Ambient Brightness
ambientPower	Switch	Ambient Power
ambientColor	Color	Ambient Color
ambientColorTemperature	Number	Ambient Color Temperature
ambientColorMode	Number	Ambient Color Mode

Yeelight Bulb (yeelink.light.mono1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight White Bulb v2 (yeelink.light.mono2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight LED Bulb 1S（Dimmable） (yeelink.light.mono4) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight LED Filament Bulb (yeelink.light.mono5) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Mi Smart LED Bulb (yeelink.light.mono6) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight LED smart bulb W3(dimmable) (yeelink.light.monoa) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight GU10 Smart Bulb W1(dimmable) (yeelink.light.monob) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Whiteglow Panel Light (yeelink.light.panel1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yeelight Lightstrip (yeelink.light.strip1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight Lightstrip Plus (yeelink.light.strip2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
rgbColor	Color	RGB Color
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow	Switch	Color Flow
name	String	Name

Yeelight Willow LED Lightstrip (yeelink.light.strip4) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Light Group (Mi & Yeelight) (yeelink.light.virtual) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name

Yeelight Smart Dual Control Module (yeelink.switch.sw1) Channels

Channel	Type	Description	Comment
on	Switch	First Switch - Switch Status
mode	Number	First Switch Default - Mode	Value mapping ["0"="Off","1"="On"]
mode1	Number	First Switch - Delay
on1	Switch	Second Switch - Switch Status
mode2	Number	Second Switch Default - Mode	Value mapping ["0"="Off","1"="On"]
mode3	Number	Second Switch Service - Delay
interlock	Switch	Extension - Interlock
flash	Number	Extension - Flash
rc-list	String	Extension - Rc List

Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) Channels

Channel	Type	Description	Comment
power	Switch	Power
brightness	Dimmer	Brightness
delayoff	Number:Time	Shutdown Timer
colorTemperature	Number	Color Temperature
colorMode	Number	Color Mode	Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name	String	Name
customScene	String	Set Scene
nightlightBrightness	Dimmer	Nightlight Brightness

Mi Water Purifier lx2 (yunmi.waterpuri.lx2) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier lx4 (yunmi.waterpuri.lx4) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier 600G (yunmi.waterpuri.lx8) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier D1 (yunmi.waterpuri.lx9) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier lx10 (yunmi.waterpuri.lx10) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier S1 (yunmi.waterpuri.lx12) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier v1 (yunmi.waterpurifier.v1) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier v2 (yunmi.waterpurifier.v2) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Mi Water Purifier v4 (yunmi.waterpurifier.v4) Channels

Channel	Type	Description	Comment
run_status	Number	Run Status
temperature	Number:Temperature	Temperature
rinse	Number	Rinse
tds_in	Number	TDS in
tds_out	Number	TDS out
f1_totalflow	Number	Filter 1 Total Flow
f1_totaltime	Number	Filter 1 Total Time
f1_usedflow	Number	Filter 1 Used Flow
f1_usedtime	Number	Filter 1 Used Time
f2_totalflow	Number	Filter 2 Total Flow
f2_totaltime	Number	Filter 2 Total Time
f2_usedflow	Number	Filter 2 Used Flow
f2_usedtime	Number	Filter 2 Used Time
f3_totalflow	Number	Filter 3 Total Flow
f3_totaltime	Number	Filter 3 Total Time
f3_usedflow	Number	Filter 3 Used Flow
f3_usedtime	Number	Filter 3 Used Time
f4_totalflow	Number	Filter 4 Total Flow
f4_totaltime	Number	Filter 4 Total Time
f4_usedflow	Number	Filter 4 Used Flow
f4_usedtime	Number	Filter 4 Used Time
maintenance_state	Number	Maintenance State
maintenance_interval	Number	Maintenance Interval
tds_warn_thd	Number	TDS Warn Threshold
tds_out_avg	Number	Average TDS out
lightMode	Number	Light Mode	Value mapping ["0"="Simple Mode","1"="Special Mode"]

Smartmi Ventilation System (zhimi.airfresh.va2) Channels

Channel	Type	Description	Comment
power	Switch	Power
heater	Switch	Heater
mode	String	Mode	Value mapping ["interval"="Interval","silent"="Night","low"="1","middle"="2","strong"="3","auto"="Auto"]
humidity	Number:Dimensionless	Humidity
co2	Number:Dimensionless	CO2
childLock	Switch	Child Lock
buzzer	Switch	Buzzer
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
led_level	Number	Led - Brightness	Value mapping ["0"="High","1"="Low","2"="Idle"]
temperature	Number:Temperature	Temperature

Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) Channels

Channel	Type	Description	Comment
power	Switch	Power
heater	Switch	Heater
mode	String	Mode	Value mapping ["interval"="Interval","silent"="Night","low"="1","middle"="2","strong"="3","auto"="Auto"]
humidity	Number:Dimensionless	Humidity
co2	Number:Dimensionless	CO2
childLock	Switch	Child Lock
buzzer	Switch	Buzzer
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
led_level	Number	Led - Brightness	Value mapping ["0"="High","1"="Low","2"="Idle"]
temperature	Number:Temperature	Temperature

Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["filter-reset-filter-life"="Filter Reset Filter Life"]
on	Switch	Air Fresh - Switch Status
fault	Number	Device Fault	Value mapping ["0"="No Faults"]
fan_level	Number	Air Fresh - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
heater	Switch	Heater
filter_used_time	Number:Time	Filter - Filter Used Time
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
alarm	Switch	Alarm - Alarm
brightness	Dimmer	Indicator Light - Brightness
motor_a_speed_rpm	Number	Custom Service - Motor A Speed Rpm
motor_b_speed_rpm	Number	Custom Service - Motor B Speed Rpm
temperature	Number:Temperature	Custom Service - Temperature

Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
aqi	Number	Air Quality Index
battery	Number	Battery
usb_state	Switch	USB State
time_state	Switch	Time State
night_state	Switch	Night State
night_begin	Number	Night Begin Time
night_end	Number	Night End Time

Xiaomi Smart Air Purifier 4 Compact (zhimi.airp.cpa4) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["air-purifier-toggle"="Air Purifier Toggle","filter-reset-filter-life"="Filter Reset Filter Life","custom-service-toggle-mode"="Custom Service Toggle Mode"]
power	Switch	Air Purifier - Switch Status
fault	Number	Air Purifier - Device Fault	Value mapping ["0"="No Faults","2"="Motor Stuck","3"="Sensor Lost"]
mode	Number	Air Purifier - Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_density	Number	Environment - PM2 5 Density
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
filter_left_time	Number:Time	Filter - Filter Left Time
alarm	Switch	Alarm - Alarm
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
brightness	Number:Dimensionless	Screen - Brightness	Value mapping ["0"="Off","1"="Bright","2"="Brightest"]
motor_speed_rpm	Number	Custom Service - Motor Speed Rpm
country_code	Number	Custom Service - Country Code	Value mapping ["17230"="CN","17749"="EU","21843"="US"]
favorite_level	Number	Custom Service - Favorite Level
filter_used_time_dbg	Number:Time	Custom Service - Filter Used Time Dbg
aqi_updata_heartbeat	Number	Aqi - Aqi Updata Heartbeat

Mi Air Purifier 3C (zhimi.airp.mb4a) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["filter-reset-filter-life"="Filter Reset Filter Life"]
on	Switch	Power
fault	String	Air Purifier - Device Fault
mode	Number	Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_density	Number	Environment - PM2 5 Density
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
brightness	Number	Screen - Brightness
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
moto_speed_rpm	Number	Custom Service - Motor Speed Rpm
miio_lib_version	String	Custom Service - Miio Lib Version
favorite_speed	Number	Custom Service - Favorite Speed
aqi_updata_heartbeat	Number:Time	Custom Service - Aqi Updata Heartbeat

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["air-purifier-toggle"="Air Purifier Toggle","filter-reset-filter-life"="Filter Reset Filter Life","custom-service-toggle-mode"="Custom Service Toggle Mode","custom-service-toggle-fan-level"="Custom Service Toggle Fan Level"]
on	Switch	Air Purifier - Switch Status
fault	Number	Air Purifier - Device Fault	Value mapping ["0"="No Faults","1"="Sensor PM Error","2"="Temp Error","3"="Hum Error","4"="No Filter"]
mode	Number	Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_level	Number	Air Purifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
anion	Switch	Air Purifier - Anion
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
pm2_5_density	Number	Environment - PM2 5 Density
temperature	Number:Temperature	Temperature
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
filter_left_time	Number:Time	Filter - Filter Left Time
alarm	Switch	Alarm - Alarm
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
brightness	Number	Screen - Brightness	Value mapping ["0"="Close","1"="Bright","2"="Brightest"]
temperature_display_unit	Number	Device Display Unit - Temperature Display Unit	Value mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpm	Number	Custom Service - Motor Speed Rpm
favorite_speed	Number	Custom Service - Favorite Speed
motor_set_speed	Number	Custom Service - Motor Set Speed
favorite_level	Number	Custom Service - Favorite Level
bottom_door	Switch	Custom Service - Bottom Door
reboot_cause	Number	Custom Service - Reboot Cause	Value mapping ["0"="REASON-HW-BOOT","1"="REASON-USER-REBOOT","2"="REASON-UPDATE","3"="REASON-WDT"]
manual_level	Number	Custom Service - Manual Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
country_code	Number	Custom Service - Country Code	Value mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN"]
iic_error_count	Number	Custom Service - Iic Error Count
filter_used_debug	Number:Time	Filter Time - Filter Used Debug
purify_volume	Number	Aqi - Purify Volume
average_aqi	Number	Aqi - Average Aqi
aqi_state	Number	Aqi - Aqi State	Value mapping ["0"="AQI-GOOD-L","1"="AQI-GOOD-H","2"="AQI-MID-L","3"="AQI-MID-H","4"="AQI-BAD-L","5"="AQI-BAD-H"]

Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier 2 (zhimi.airpurifier.m2) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier 2S (zhimi.airpurifier.ma1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier 2S (zhimi.airpurifier.ma2) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
bright	Dimmer	LED Brightness
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level
temperature	Number:Temperature	Temperature
purifyvolume	Number	Purivied Volume
childlock	Switch	Child Lock

Mi Air Purifier 3 (zhimi.airpurifier.ma4) Channels

Channel	Type	Description	Comment
fault	Number	Air Purifier - Device Fault	Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp"]
on	Switch	Air Purifier - Switch Status
fan-level	Number	Air Purifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
mode	Number	Air Purifier - Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="None"]
pm2_5-density	Number	Environment - Pm2.5 Density
relative-humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-used-time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
brightness	Number:Dimensionless	Indicator Light - Brightness	Value mapping ["0"="brightest","1"="glimmer","2"="led_closed"]
on1	Switch	Indicator Light - Switch Status
physical-controls-locked	Switch	Physical Control Locked - Physical Control Locked
button-pressed	String	Button - Button_pressed
filter-max-time	Number:Time	Filter Time - Filter Max Time
filter-hour-used-debug	Number	Filter Time - Filter Hour Used Debug
m1-strong	Number	Motor Speed - M1 Strong
m1-high	Number	Motor Speed - M1 High
m1-med	Number	Motor Speed - M1 Med
m1-med-l	Number	Motor Speed - M1 Med L
m1-low	Number	Motor Speed - M1 Low
m1-silent	Number	Motor Speed - M1 Silent
m1-favorite	Number	Motor Speed - M1 Favorite
motor1-speed	Number	Motor Speed - Motor1 Speed
motor1-set-speed	Number	Motor Speed - Motor1 Set Speed
favorite-fan-level	Number	Motor Speed - Favorite Fan Level
use-time	Number:Time	Use Time - Use Time
purify-volume	Number:Volume	Aqi - Purify Volume
average-aqi	Number	Aqi - Average Aqi
average-aqi-cnt	Number	Aqi - Average Aqi Cnt
aqi-zone	String	Aqi - Aqi Zone
sensor-state	String	Aqi - Sensor State
aqi-goodh	Number	Aqi - Aqi Goodh
aqi-runstate	Number	Aqi - Aqi Runstate	Value mapping ["0"="continue","1"="hold","2"="sleep"]
aqi-state	Number	Aqi - Aqi State	Value mapping ["0"="AQI_GOOD_L","1"="AQI_GOOD_H","2"="AQI_MID_L","3"="AQI_MID_H","4"="AQI_BAD_L","5"="AQI_BAD_H"]
aqi-updata-heartbeat	Number	Aqi - Aqi Updata Heartbeat
rfid-tag	String	Rfid - Rfid Tag
rfid-factory-id	String	Rfid - Rfid Factory Id
rfid-product-id	String	Rfid - Rfid Product Id
rfid-time	String	Rfid - Rfid Time
rfid-serial-num	String	Rfid - Rfid Serial Num
app-extra	Number	Others - App Extra
main-channel	Number	Others - Main Channel
slave-channel	Number	Others - Slave Channel
cola	String	Others - Cola
buttom-door	Switch	Others - Buttom Door
reboot-cause	Number	Others - Reboot_cause	Value mapping ["0"="REASON_HW_BOOT","1"="REASON_USER_REBOOT","2"="REASON_UPDATE","3"="REASON_WDT"]
hw-version	Number	Others - Hw Version
i2c-error-count	Number	Others - I2c Error Count
manual-level	Number	Others - Manual Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]

Mi Air Purifier 2S (zhimi.airpurifier.mb1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) Channels

Channel	Type	Description	Comment
fault	Number	Air Purifier - Fault	Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp"]
on	Switch	Air Purifier - Switch Status
fan-level	Number	Air Purifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
mode	Number	Air Purifier - Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="None"]
pm2_5-density	Number	Environment - Pm2.5 density
relative-humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
filter-life-level	Number:Dimensionless	Filter - Filter Life Level
filter-used-time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
brightness	Number:Dimensionless	Indicator Light - Brightness	Value mapping ["0"="Brightest","1"="Glimmer","2"="Led Closed"]
on1	Switch	Indicator Light - Switch Status
physical-controls-locked	Switch	Physical Control Locked - Physical Control Locked
button-pressed	String	Button - Button Pressed
filter-max-time	Number	Filter Time - Filter Max Time
filter-hour-debug	Number	Filter Time - Filter Hour Debug
motor-strong	Number	Motor Speed - Motor Strong
motor-high	Number	Motor Speed - Motor High
motor-med	Number	Motor Speed - Motor Med
motor-med-l	Number	Motor Speed - Motor Med L
motor-low	Number	Motor Speed - Motor Low
motor-silent	Number	Motor Speed - Motor Silent
motor-favorite	Number	Motor Speed - Motor Favorite
motor-speed	Number	Motor Speed - Motor Speed
motor-set-speed	Number	Motor Speed - Motor Set Speed
favorite-fan-level	Number	Motor Speed - Favorite Fan Level
use-time	Number:Time	Use Time - Use Time
purify-volume	Number:Volume	Aqi - Purify Volume
average-aqi	Number	Aqi - Average Aqi
average-aqi-cnt	Number	Aqi - Average Aqi Cnt
aqi-zone	String	Aqi - Aqi Zone
sensor-state	String	Aqi - Sensor State
aqi-goodh	Number	Aqi - Aqi Goodh
aqi-runstate	Number	Aqi - Aqi Runstate	Value mapping ["0"="continuous sampling","1"="preparing sampling","2"="stop sampling"]
aqi-state	Number	Aqi - Aqi State	Value mapping ["0"="best","1"="good","2"="normal","3"="bad","4"="worse","5"="unhealthy"]
aqi-updata-heartbeat	Number	Aqi - Aqi Updata Heartbeat
rfid-tag	String	Rfid - Rfid Tag
rfid-factory-id	String	Rfid - Rfid Factory Id
rfid-product-id	String	Rfid - Rfid Product Id
rfid-time	String	Rfid - Rfid Time
rfid-serial-num	String	Rfid - Rfid Serial Num
app-extra	Number	Others - App Extra
main-channel	Number	Others - Main Channel
slave-channel	Number	Others - Slave Channel
cola	String	Others - Cola
buttom-door	Switch	Others - Buttom Door
reboot-cause	Number	Others - Reboot Cause	Value mapping ["0"="hardware reboot","1"="software reboot","2"="update reboot","3"="dog reboot"]
hw-version	Number	Others - Hw Version
iic-error-count	Number	Others - Iic Error Count
manual-level	Number	Others - Manual Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
country-code	Number	Others - National Code	Value mapping ["91"="India","44"="UK","852"="Hong Kong","886"="Taiwan","82"="Korea"]

Mi Air Purifier 3C (zhimi.airpurifier.mb4) Channels

Channel	Type	Description	Comment
on	Switch	Power
fault	String	Air Purifier - Device Fault
mode	Number	Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_density	Number	Environment - Pm2 5 Density
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
brightness	Number	Screen - Brightness
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
moto_speed_rpm	Number	Custom Service - Moto Speed Rpm
miio_lib_version	String	Custom Service - Miio Lib Version
favorite_speed	Number	Custom Service - Favorite Speed
aqi_updata_heartbeat	Number:Time	Custom Service - Aqi Updata Heartbeat

Mi Air Purifier 2S (zhimi.airpurifier.mc1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier 2H (zhimi.airpurifier.mc2) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier Super (zhimi.airpurifier.sa1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier v1 (zhimi.airpurifier.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier v2 (zhimi.airpurifier.v2) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier v3 (zhimi.airpurifier.v3) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier v5 (zhimi.airpurifier.v5) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode	Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
buzzer	Switch	Buzzer Status
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level	Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature	Number:Temperature	Temperature
purifyvolume	Number:Volume	Purified Volume
childlock	Switch	Child Lock

Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
led	Switch	LED Status
bright	Dimmer	LED Brightness
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level
temperature	Number:Temperature	Temperature
purifyvolume	Number	Purivied Volume
childlock	Switch	Child Lock

Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
humidity	Number:Dimensionless	Humidity
aqi	Number	Air Quality Index
averageaqi	Number	Average Air Quality Index
volume	Number	Volume
led	Switch	LED Status
illuminance	Number	Illuminance
filtermaxlife	Number	Filter Max Life
filterhours	Number:Time	Filter Hours used
motorspeed	Number	Motor Speed
motorspeed2	Number	Motor Speed 2
filterlife	Number	Filter Life
favoritelevel	Number	Favorite Level
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock

Mi Air Purifier Pro H (zhimi.airpurifier.vb2) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["button-toggle"="Toggle","button-toggle-mode"="Toggle Mode"]
fault	Number	Air Purifier - Device Fault	Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp","6"="timer_error1","7"="timer_error2"]
on	Switch	Air Purifier - Power
fan_level	Number	Air Purifier - Fan Level	Value mapping ["1"="Level1","2"="Level2","3"="Level3","0"="Sleep"]
mode	Number	Air Purifier - Mode	Value mapping ["0"="Auto","1"="Night","2"="Favourite","3"="Manual"]
pm2_5_density	Number	Environment - PM2 5 Density
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
volume	Number:Dimensionless	Alarm - Volume
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="brightest","1"="glimmer","2"="not bright"]
on1	Switch	Indicator Light - Switch Status
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
button_pressed	String	Button - Button_pressed
filter_max_time	Number:Time	Filter Time - Filter Max Time
filter_hour_used_debug	Number:Time	Filter Time - Filter Hour Used Debug
m1_strong	Number	Motor Speed - M1 Strong
m1_high	Number	Motor Speed - M1 High
m1_med	Number	Motor Speed - M1 Med
m1_med_l	Number	Motor Speed - M1 Med L
m1_low	Number	Motor Speed - M1 Low
m1_silent	Number	Motor Speed - M1 Silent
m1_favorite	Number	Motor Speed - M1 Favorite
motor1_speed	Number	Motor Speed - Motor1 Speed
motor1_set_speed	Number	Motor Speed - Motor1 Set Speed
favorite_level	Number	Motor Speed - Favorite Level
use_time	Number:Time	Use Time - Use Time
purify_volume	Number	Aqi - Purify Volume
average_aqi	Number	Aqi - Average Aqi
average_aqi_cnt	Number	Aqi - Average_aqi Read Times
aqi_zone	String	Aqi - Aqi Zone
sensor_state	Number	Aqi - Sensor State	Value mapping ["0"="waiting","1"="ready"]
aqi_goodh	Number	Aqi - Aqi Goodh
aqi_runstate	Number	Aqi - Runstate	Value mapping ["0"="continue","1"="hold","2"="sleep"]
aqi_state	Number	Aqi - Aqi State	Value mapping ["0"="AQI_GOOD_L","1"="AQI_GOOD_H","2"="AQI_MID_L","3"="AQI_MID_H","4"="AQI_BAD_L","5"="AQI_BAD_H"]
rfid_tag	String	Rfid - Rfid Tag
rfid_factory_id	String	Rfid - Rfid Factory Id
rfid_product_id	String	Rfid - Rfid Product Id
rfid_time	String	Rfid - Rfid Time
rfid_serial_num	String	Rfid - Rfid Serial Num
app_extra	Number	Others - App Extra
main_channel	Number	Others - Main Channel
slave_channel	Number	Others - Slave Channel
cola	String	Others - Cola
buttom_door	String	Others - Buttom Door
reboot_cause	Number	Others - Reboot_cause	Value mapping ["0"="REASON_HW_BOOT","1"="REASON_USER_REBOOT","2"="REASON_UPDATE","3"="REASON_WDT"]
manual_level	Number	Others - Manual Level	Value mapping ["1"="level1","2"="level2","3"="level3"]
powertime	Number:Time	Others - Powertime
country_code	Number	Others - Country Code	Value mapping ["91"="India","44"="UK","852"="Hong Kong","886"="Taiwan","82"="Korea"]

Smartmi Air Purifier (zhimi.airpurifier.za1) Channels

Channel	Type	Description	Comment
on	Switch	Air Purifier - Switch Status
fault	Number	Air Purifier - Fault	Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp","6"="timer_error1","7"="timer_error2"]
mode	Number	Air Purifier - Mode	Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
air_quality	Number	Environment - Air Quality
pm2_5_density	Number	Environment - PM2 5 Density
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
filter_life_level	Number:Dimensionless	Filter - Filter Life Level
filter_used_time	Number:Time	Filter - Filter Used Time
alarm	Switch	Alarm - Alarm
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Light","2"="Off"]
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
filter_max_time	Number:Time	Filter Time - Filter Max Time
favorite_fan_level	Number	Motor Speed - Favorite Fan Level
motor_speed	Number	Motor Speed - Motor Speed
use_time	Number:Time	Use Time - Use Time
purify_volume	Number	Aqi - Purify Volume
average_aqi	Number	Aqi - Average Aqi
aqi_zone	String	Aqi - Aqi Zone
sensor_state	Number	Aqi - Sensor State	Value mapping ["0"="waiting","1"="ready"]
rfid_tag	String	Rfid - Rfid Tag
rfid_factory_id	String	Rfid - Rfid Factory Id
rfid_product_id	String	Rfid - Rfid Product Id
rfid_time	String	Rfid - Rfid Time
rfid_serial_num	String	Rfid - Rfid Serial Num
reboot_cause	Number	Others - Reboot Cause	Value mapping ["0"="hardware","1"="human","2"="upgrade","3"="watchdog"]
hw_version	Number	Others - Hw Version
sgp_ethanol	Number	Others - Sgp Ethanol
sgp_serial	Number	Others - Sgp Serial
sgp_version	String	Others - Sgp Version
country_code	Number	Others - Country Code	Value mapping ["1"="America","2"="Canada","3"="Singapore","4"="Europe","5"="Australian","6"="Korea","7"="China","8"="France","9"="Japanese","10"="Taiwan"]
gesture_status	Switch	Others - Gesture Status

Mi Standing Fan (zhimi.fan.sa1) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number:Angle	Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime	Number:Time	Power-Off Timer
buzzer	Switch	Buzzer
led_b	Number	LED	Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock	Switch	Child Lock
speedLevel	Dimmer	Speed Level
speed	Number	Speed
naturalLevel	Dimmer	Natural Level
acPower	Switch	AC Power
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Mi Smart Fan (zhimi.fan.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number:Angle	Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime	Number:Time	Power-Off Timer
buzzer	Switch	Buzzer
led_b	Number	LED	Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock	Switch	Child Lock
speedLevel	Dimmer	Speed Level
speed	Number	Speed
naturalLevel	Dimmer	Natural Level
temp_dec	Number	Temperature
humidity	Number:Dimensionless	Humidity
acPower	Switch	AC Power
mode	String	Battery Charge
battery	Number	Battery
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi DC Pedestal Fan (zhimi.fan.v2) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number:Angle	Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime	Number:Time	Power-Off Timer
buzzer	Switch	Buzzer
led_b	Number	LED	Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock	Switch	Child Lock
speedLevel	Dimmer	Speed Level
speed	Number	Speed
naturalLevel	Dimmer	Natural Level
temp_dec	Number	Temperature
humidity	Number:Dimensionless	Humidity
acPower	Switch	AC Power
mode	String	Battery Charge
battery	Number	Battery
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi DC Pedestal Fan (zhimi.fan.v3) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number:Angle	Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime	Number:Time	Power-Off Timer
buzzer	Switch	Buzzer
led_b	Number	LED	Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock	Switch	Child Lock
speedLevel	Dimmer	Speed Level
speed	Number	Speed
naturalLevel	Dimmer	Natural Level
temp_dec	Number	Temperature
humidity	Number:Dimensionless	Humidity
acPower	Switch	AC Power
mode	String	Battery Charge
battery	Number	Battery
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi Inverter Pedestal Fan (zhimi.fan.za1) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number:Angle	Angle	Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime	Number:Time	Power-Off Timer
buzzer	Switch	Buzzer
led_b	Number	LED	Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock	Switch	Child Lock
speedLevel	Dimmer	Speed Level
speed	Number	Speed
naturalLevel	Dimmer	Natural Level
acPower	Switch	AC Power
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi Standing Fan 2 (zhimi.fan.za3) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number	Angle
poweroffTime	Number	Timer
buzzer	Number	Buzzer
led_b	Number	LED
child_lock	Switch	Child Lock
speedLevel	Number	Speed Level
speed	Number	Speed
naturalLevel	Number	Natural Level
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi Standing Fan 2S (zhimi.fan.za4) Channels

Channel	Type	Description	Comment
power	Switch	Power
angleEnable	Switch	Rotation
usedhours	Number:Time	Run Time
angle	Number	Angle
poweroffTime	Number	Timer
buzzer	Number	Buzzer
led_b	Number	LED
child_lock	Switch	Child Lock
speedLevel	Number	Speed Level
speed	Number	Speed
naturalLevel	Number	Natural Level
move	String	Move Direction	Value mapping [""="None","left"="Left","right"="Right"]

Smartmi Standing Fan 3 (zhimi.fan.za5) Channels

Channel	Type	Description	Comment
on	Switch	Fan - Power
fan_level	Number	Fan - Fan Level	Value mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
horizontal_swing	Switch	Fan - Horizontal Swing
horizontal_angle	Number	Fan - Horizontal Angle
mode	Number	Fan - Mode	Value mapping ["0"="Natural Wind","1"="Straight Wind"]
off_delay	Number	Fan - Power Off Delay
anion	Switch	Fan - Anion
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
brightness	Number:Dimensionless	Indicator Light - Brightness
alarm	Switch	Alarm - Alarm
relative_humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
button_press	Number	Custom Service - Button Press	Value mapping ["1"="power","2"="swing","0"="No Button Pressed"]
battery_state	Switch	Custom Service - Battery State
speed_now	Number	Custom Service - Speed Now
ac_state	Switch	Custom Service - Ac State
speed_level	Number:Dimensionless	Custom Service - Speed Level

Mi Smart Space Heater S (zhimi.heater.ma2) Channels

Channel	Type	Description	Comment
on	Switch	Heater - Switch Status
fault	Number	Heater - Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature	Number:Temperature	Heater - Target Temperature
countdown_time	Number:Time	Countdown - Countdown Time
temperature	Number:Temperature	Environment - Temperature
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
alarm	Switch	Alarm - Alarm
brightness	Number:Dimensionless	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enable	Switch	Private Service - Hw Enable
use_time	Number:Time	Private Service - Use Time

Mi Smart Baseboard Heater E (zhimi.heater.ma3) Channels

Channel	Type	Description	Comment
actions	String	Actions	Value mapping ["private-service-toggle-switch"="Toggle Private Service"]
on	Switch	Heater - Switch Status
fault	Number	Heater - Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature	Number:Temperature	Heater - Target Temperature
mode	Number	Heater - Mode	Value mapping ["0"="Auto","1"="LL Mode","2"="HH Mode"]
countdown_time	Number:Time	Countdown - Countdown Time
temperature	Number:Temperature	Environment - Temperature
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
alarm	Switch	Alarm - Alarm
brightness	Number:Dimensionless	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
use_time	Number:Time	Private Service - Use Time

Mi Smart Space Heater S (zhimi.heater.mc2) Channels

Channel	Type	Description	Comment
on	Switch	Heater - Power
fault	Number	Heater - Device Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature	Number:Temperature	Heater - Target Temperature
countdown_time	Number:Time	Countdown - Countdown Time
temperature	Number:Temperature	Environment - Temperature
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
alarm	Switch	Alarm - Alarm
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enable	Switch	Private Service - Hw Enable
use_time	Number:Time	Private Service - Use Time
country_code	Number	Private Service - Country Code	Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

Smartmi Smart Fan (zhimi.heater.na1) Channels

Channel	Type	Description	Comment
on	Switch	Heater - Power
fault	Number	Heater - Device Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_level	Number	Heater - Heat Level	Value mapping ["1"="High","2"="Low"]
mode	Number	Heater - Mode	Value mapping ["0"="Fan not swing","1"="Fan swing"]
alarm	Switch	Alarm - Alarm
countdown_time	Number:Time	Countdown - Countdown Time
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
return_to_middle	Switch	Private Service - Return To Middle

Smartmi Smart Fan Heater (zhimi.heater.nb1) Channels

Channel	Type	Description	Comment
on	Switch	Heater - Power
fault	Number	Heater - Device Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_level	Number	Heater - Heat Level	Value mapping ["1"="High","2"="Low"]
mode	Number	Heater - Mode	Value mapping ["0"="Fan not swing","1"="Fan swing"]
target_temperature	Number:Temperature	Heater - Target Temperature
temperature	Number:Temperature	Environment - Temperature
alarm	Switch	Alarm - Alarm
countdown_time	Number:Time	Countdown - Countdown Time
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_locked	Switch	Physical Control Locked - Physical Control Locked
return_to_middle	Switch	Private Service - Return To Middle
country_code	Number	Private Service - Country Code	Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]
hw_en	Switch	Private Service - Hw En

Smartmi Radiant Heater Smart Version (zhimi.heater.za1) Channels

Channel	Type	Description	Comment
power	Switch	Power
target_temperature	Number:Temperature	Target Temperature
brightness	Dimmer	Brightness
buzzer	Switch	Buzzer Status
relative_humidity	Number:Dimensionless	Relative Humidity
childlock	Switch	Child Lock
HWSwitch	Switch	HW Switch
temperature	Number:Temperature	Temperature
usedhours	Number:Time	Run Time

Smartmi Smart Convector Heater 1S (zhimi.heater.za2) Channels

Channel	Type	Description	Comment
fault	Number	Heater - Device Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
on	Switch	Heater - Power
target-temperature	Number:Temperature	Heater - Target Temperature
alarm	Switch	Alarm - Alarm
countdown-time	Number:Time	Countdown - Countdown Time
relative-humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-locked	Switch	Physical Control Locked - Physical Controls Locked
use-time	Number:Time	Private-Service - Use Time

Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) Channels

Channel	Type	Description	Comment
on	Switch	Heater - Power
fault	Number	Heater - Device Fault	Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target-temperature	Number:Temperature	Heater - Target Temperature
alarm	Switch	Alarm - Alarm
countdown-time	Number:Time	Countdown - Countdown Time
relative-humidity	Number:Dimensionless	Environment - Relative Humidity
temperature	Number:Temperature	Environment - Temperature
brightness	Number	Indicator Light - Brightness	Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-locked	Switch	Physical Control Locked - Physical Controls Locked
use-time	Number:Time	Private-Service - Use Time
country-code	Number	Private-Service - Country-Code	Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
humidity	Number:Dimensionless	Humidity
setHumidity	Number	Humidity Set
aqi	Number	Air Quality Index
translevel	Number	Trans_level
bright	Dimmer	LED Brightness
buzzer	Switch	Buzzer Status
depth	Number	Depth
dry	Switch	Dry
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock

Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	Number	Mode - Fan Level	Value mapping ["0"="Auto","1"="Silent","2"="Normal","3"="Maximum"]
Fault	Number	Humidifier Device Fault
humidity	Number:Dimensionless	Humidity
targetHumidity	Number:Dimensionless	Target Humidity
waterlevel	Number	Water Level
bright	Number	LED Brightness	Value mapping ["0"="Dark","1"="Dimmed","2"="Brightest"]
buzzer	Switch	Buzzer Status
dry	Switch	Dry
usedhours	Number:Time	Run Time
powerhours	Number:Time	Power Time
targetmotorspeed	Number	Target Motor Speed
actualmotorspeed	Number	Actual Motor Speed
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock
ButtonPressed	Number	Button Pressed	Value mapping ["0"="none","1"="led","2"="power"]
clean	Switch	Clean Mode

Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) Channels

Channel	Type	Description	Comment
power	Switch	Power
humidifierMode	String	Humidifier Mode
humidity	Number:Dimensionless	Humidity
setHumidity	Number:Dimensionless	Humidity Set
bright	Dimmer	LED Brightness
buzzer	Switch	Buzzer Status
depth	Number	Depth
dry	Switch	Dry
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock

Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) Channels

Channel	Type	Description	Comment
power	Switch	Power
humidifierMode	String	Humidifier Mode
humidity	Number:Dimensionless	Humidity
setHumidity	Number:Dimensionless	Humidity Set
bright	Dimmer	LED Brightness
buzzer	Switch	Buzzer Status
depth	Number	Depth
dry	Switch	Dry
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock

Smartmi Humidifier (zhimi.humidifier.v1) Channels

Channel	Type	Description	Comment
power	Switch	Power
mode	String	Mode
humidity	Number:Dimensionless	Humidity
setHumidity	Number	Humidity Set
aqi	Number	Air Quality Index
translevel	Number	Trans_level
bright	Dimmer	LED Brightness
buzzer	Switch	Buzzer Status
depth	Number	Depth
dry	Switch	Dry
usedhours	Number:Time	Run Time
motorspeed	Number	Motor Speed
temperature	Number:Temperature	Temperature
childlock	Switch	Child Lock

Mi Smart Power Strip (zimi.powerstrip.v2) Channels

Channel	Type	Description	Comment
power	Switch	Power
powerUsage	Number	Power Consumption
led	Switch	wifi LED
power_price	Number	power_price
current	Number	Current
temperature	Number:Temperature	Temperature
lp_autooff	Number	Low Power Auto Off
lp_autooff_delay	Number	Low Power Limit Time
lp_threshold	Number	Low Power Threshold

Example item file Rockrobo vacuum

Group  gVac     "Xiaomi Robot Vacuum"      <fan>
Group  gVacStat "Status Details"           <status> (gVac)
Group  gVacCons "Consumables Usage"        <line-increase> (gVac)
Group  gVacDND  "Do Not Disturb Settings"  <moon> (gVac)
Group  gVacHist "Cleaning History"         <calendar> (gVac)
Group  gVacLast "Last Cleaning Details"       <calendar> (gVac)

String actionControl  "Vacuum Control"          {channel="miio:vacuum:034F0E45:actions#control" }
String actionCommand  "Vacuum Command"          {channel="miio:vacuum:034F0E45:actions#commands" }

Number statusBat    "Battery Level [%1.0f%%]" <battery>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#battery" }
Number statusArea    "Cleaned Area [%1.0fm²]" <zoom>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_area" }
Number statusTime    "Cleaning Time [%1.0f']" <clock>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_time" }
String  statusError    "Error [%s]"  <error>  (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#error_code" }
Number statusFanPow    "Fan Power [%1.0f%%]"  <signal>   (gVacStat) {channel="miio:vacuum:034F0E45:status#fan_power" } 
Number statusClean    "In Cleaning Status [%1.0f]"   <switch>  (gVacStat) {channel="miio:vacuum:034F0E45:status#in_cleaning" }
Switch statusDND    "DND Activated"    (gVacStat) {channel="miio:vacuum:034F0E45:status#dnd_enabled" }
Number statusStatus    "Status [%1.0f]"  <status>  (gVacStat) {channel="miio:vacuum:034F0E45:status#state"} 
Switch isLocating    "Locating"    (gVacStat) {channel="miio:vacuum:034F0E45:status#is_locating" }

Number consumableMain    "Main Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#main_brush_time"}
Number consumableSide    "Side Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#side_brush_time"}
Number consumableFilter    "Filter Time[%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#filter_time" }
Number consumableSensor    "Sensor [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#sensor_dirt_time"}

Switch dndFunction   "DND Function" <moon>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_function"}
String dndStart   "DND Start Time [%s]" <clock>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_start"}
String dndEnd   "DND End Time [%s]"   <clock-on>  (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_end"}

Number historyArea    "Total Cleaned Area [%1.0fm²]" <zoom>    (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_area"}
String historyTime    "Total Clean Time [%s]"   <clock>     (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_time"}
Number historyCount    "Total # Cleanings [%1.0f]"  <office>  (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_count"}

String lastStart   "Last Cleaning Start time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_start_time"}
String lastEnd     "Last Cleaning End time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_end_time"}
Number lastArea    "Last Cleaned Area [%1.0fm²]" <zoom>    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_area"}
Number lastTime    "Last Clean Time [%1.0f']"   <clock>     (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_duration"}
Number lastError    "Error [%s]"  <error>  (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_error" }
Switch lastCompleted  "Last Cleaning Completed"    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_finish" }

Image map "Cleaning Map" (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#map"}

Mi Air Frying Pan (careli.fryer.maf01) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Smart Air Fryer (3.5L)" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

Mi Air Frying Pan (careli.fryer.maf03) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

Qingping Air Monitor Lite (cgllc.airm.cgdn1) item file lines

note: Autogenerated example. Replace the id (airm) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airm "Qingping Air Monitor Lite" <status>
String actions "Actions" (G_airm) {channel="miio:basic:airm:actions"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airm) {channel="miio:basic:airm:relative_humidity"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airm) {channel="miio:basic:airm:pm2_5_density"}
Number:Density pm10_density "Environment - PM10 Density" (G_airm) {channel="miio:basic:airm:pm10_density"}
Number:Temperature temperature "Environment - Temperature" (G_airm) {channel="miio:basic:airm:temperature"}
Number:Density co2_density "Environment - CO2 Density" (G_airm) {channel="miio:basic:airm:co2_density"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_airm) {channel="miio:basic:airm:battery_level"}
Number charging_state "Battery - Charging State" (G_airm) {channel="miio:basic:airm:charging_state"}
Number:ElectricPotential voltage "Battery - Voltage" (G_airm) {channel="miio:basic:airm:voltage"}
String mac "Mac - Mac" (G_airm) {channel="miio:basic:airm:mac"}
Number:Time monitoring_frequency "Settings - Monitoring Frequency" (G_airm) {channel="miio:basic:airm:monitoring_frequency"}
Number:Time screen_off "Settings - Screen Off" (G_airm) {channel="miio:basic:airm:screen_off"}
Number:Time device_off "Settings - Device Off" (G_airm) {channel="miio:basic:airm:device_off"}
String tempature_unit "Settings - Tempature Unit" (G_airm) {channel="miio:basic:airm:tempature_unit"}

Mi Multifunction Air Monitor (cgllc.airmonitor.b1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Mi Multifunction Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number co2 "CO2e" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}

Qingping Air Monitor (cgllc.airmonitor.s1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Qingping Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number co2 "CO2" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}

Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway)" <status>
Switch on "Power" (G_plug) {channel="miio:basic:plug:on"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Number:Time working_time "Working Time" (G_plug) {channel="miio:basic:plug:working-time"}
Switch on1 "Indicator Light - Switch Status" (G_plug) {channel="miio:basic:plug:on1"}
Number:Energy power_consumption "Daily Power Consumption" (G_plug) {channel="miio:basic:plug:power-consumption"}
Number:Current electric_current "Power Consumption - Electric Current" (G_plug) {channel="miio:basic:plug:electric-current"}
Number:ElectricPotential voltage "Power Consumption - Voltage" (G_plug) {channel="miio:basic:plug:voltage"}
Number:Power electric_power "Current Power Consumption - Electric Power" (G_plug) {channel="miio:basic:plug:electric-power"}
Number:Time on_duration "Imilab Timer - On Duration" (G_plug) {channel="miio:basic:plug:on-duration"}
Number:Time off_duration "Imilab Timer - Off Duration" (G_plug) {channel="miio:basic:plug:off-duration"}
Number:Time countdown "Imilab Timer - Countdown" (G_plug) {channel="miio:basic:plug:countdown"}
Switch task_switch "Imilab Timer - Task Switch" (G_plug) {channel="miio:basic:plug:task-switch"}
Switch countdown_info "Imilab Timer - Countdown Info" (G_plug) {channel="miio:basic:plug:countdown-info"}
String bt_gw "BT Gateway" (G_plug) {channel="miio:basic:plug:bt-gw"}
String bt_gw_devices "Connected BT Gateway Devices" (G_plug) {channel="miio:basic:plug:bt-gw-devices"}

Mi Smart Plug WiFi (chuangmi.plug.hmi205) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug WiFi" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (WiFi)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Wi-Fi Plug (Bluetooth Gateway)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

Mi Plug Mini (chuangmi.plug.m1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Plug Mini" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (Wi-Fi) Basic" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Power Plug (chuangmi.plug.v1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}

Mi Smart Power Plug v2 (chuangmi.plug.v2) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug v2" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}

MIJIA Smart Plug Enhanced (chuangmi.plug.v3) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "MIJIA Smart  Plug Enhanced" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

Gosund Smart Plug (cuco.plug.cp1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Gosund Smart Plug" <status>
String FirmwareRevision "Device Information-CurrentFirmware Version" (G_plug) {channel="miio:basic:plug:FirmwareRevision"}
String Manufacturer "Device Information-Device Manufacturer" (G_plug) {channel="miio:basic:plug:Manufacturer"}
String Model "Device Information-Device Model" (G_plug) {channel="miio:basic:plug:Model"}
String SerialNumber "Device Information-Device Serial Number" (G_plug) {channel="miio:basic:plug:SerialNumber"}
Switch On "Switch-Switch Status" (G_plug) {channel="miio:basic:plug:On"}

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}

Mi S Smart Humidifer (deerma.humidifier.jsq1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi S Smart Humidifer " <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}
Switch wet_and_protect "Wet and Protect" (G_humidifier) {channel="miio:basic:humidifier:wet_and_protect"}

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch on "Humidifier - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on"}
Number fault "Humidifier - Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Humidifier - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Humidifier - Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_humidifier) {channel="miio:basic:humidifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch alarm "Alarm - Alarm" (G_humidifier) {channel="miio:basic:humidifier:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on1"}
Switch water_shortage_fault "Custom - Water Shortage Fault" (G_humidifier) {channel="miio:basic:humidifier:water_shortage_fault"}
Switch the_tank_filed "Custom - The Tank Filed" (G_humidifier) {channel="miio:basic:humidifier:the_tank_filed"}

Mi Smart Humidifer S (deerma.humidifier.jsqs) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Humidifer S" <status>
Switch on "Humidifier - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on"}
Number fault "Humidifier - Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Humidifier - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Humidifier - Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_humidifier) {channel="miio:basic:humidifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch alarm "Alarm - Alarm" (G_humidifier) {channel="miio:basic:humidifier:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on1"}
Switch water_shortage_fault "Custom - Water Shortage Fault" (G_humidifier) {channel="miio:basic:humidifier:water_shortage_fault"}
Switch the_tank_filed "Custom - The Tank Filed" (G_humidifier) {channel="miio:basic:humidifier:the_tank_filed"}

Mi Smart Humidifier (deerma.humidifier.mjjsq) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}

Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator A1-150" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String airFreshMode "Mode" (G_airfresh) {channel="miio:basic:airfresh:airFreshMode"}
Switch airFreshPTCPower "PTC" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCPower"}
Switch airFreshPTCStatus "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCStatus"}
Switch airFreshDisplay "Display" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplay"}
Switch airFreshChildLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:airFreshChildLock"}
Switch airFreshSound "Sound" (G_airfresh) {channel="miio:basic:airfresh:airFreshSound"}
Number airFreshPM25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:airFreshPM25"}
Number airFreshCO2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:airFreshCO2"}
Number airFreshCurrentSpeed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshCurrentSpeed"}
Number airFreshFavoriteSpeed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshFavoriteSpeed"}
Number airFreshTemperature "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:airFreshTemperature"}
Number airFreshFilterPercents "Filter Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterPercents"}
Number airFreshFilterDays "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterDays"}
String airFreshResetFilterA1 "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:airFreshResetFilterA1"}

Mi Fresh Air Ventilator (dmaker.airfresh.t2017) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String airFreshMode "Mode" (G_airfresh) {channel="miio:basic:airfresh:airFreshMode"}
Switch airFreshPTCPower "PTC" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCPower"}
String airFreshPtcLevel "PTC Level" (G_airfresh) {channel="miio:basic:airfresh:airFreshPtcLevel"}
Switch airFreshPTCStatus "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCStatus"}
String airFreshDisplayDirection "Screen direction" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplayDirection"}
Switch airFreshDisplay "Display" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplay"}
Switch airFreshChildLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:airFreshChildLock"}
Switch airFreshSound "Sound" (G_airfresh) {channel="miio:basic:airfresh:airFreshSound"}
Number airFreshPM25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:airFreshPM25"}
Number airFreshCO2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:airFreshCO2"}
Number airFreshCurrentSpeed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshCurrentSpeed"}
Number airFreshFavoriteSpeed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshFavoriteSpeed"}
Number airFreshTemperature "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:airFreshTemperature"}
Number airFreshFilterPercents "Filter Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterPercents"}
Number airFreshFilterDays "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterDays"}
Number airFreshFilterProPercents "Filter Pro Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterProPercents"}
Number airFreshFilterProDays "Filter Pro Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterProDays"}
String airFreshResetFilter "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:airFreshResetFilter"}

Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2 Lite" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Number:Time OffDelayTime "Fan-Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Standing Fan 1X (dmaker.fan.p5) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 1X" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch roll "Rotation" (G_fan) {channel="miio:basic:fan:roll"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number timer "Timer" (G_fan) {channel="miio:basic:fan:timer"}
Switch beep "Beep Sound" (G_fan) {channel="miio:basic:fan:beep"}
Number light "Light" (G_fan) {channel="miio:basic:fan:light"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}

Mi Smart Standing Fan 1C (dmaker.fan.p8) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 1C" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Number:Time OffDelayTime "Fan-Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Tower Fan (dmaker.fan.p9) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Tower Fan" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan-Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number HorizontalAngle "Fan-Horizontal Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Number:Time OffDelayTime "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Number MotorControl "Fan-Motor Control" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number SpeedLevel "Fan-Speed Level" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Standing Fan 2 (dmaker.fan.p10) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan-Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number HorizontalAngle "Fan-Horizontal Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Number:Time OffDelayTime "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Number MotorControl "Fan-Motor Control" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number SpeedLevel "Fan-Speed Level" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Standing Fan Pro (dmaker.fan.p15) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan Pro" <status>
Switch on "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Gear Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number status "Fan - Status" (G_fan) {channel="miio:basic:fan:status"}
Switch on1 "Indicator Light - Switch Status" (G_fan) {channel="miio:basic:fan:on1"}
Switch alarm "Alarm - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number fault "Motor Controller - Device Fault" (G_fan) {channel="miio:basic:fan:fault"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number:Time off_delay_time "Off Delay Time - Off Delay Time" (G_fan) {channel="miio:basic:fan:off_delay_time"}
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}

Mi Smart Standing Fan 2 (dmaker.fan.p18) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch on "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number:Time off_delay_time "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch brightness "Fan - Brightness" (G_fan) {channel="miio:basic:fan:brightness"}
Switch alarm "Fan - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number motor_control "Fan - Motor Control" (G_fan) {channel="miio:basic:fan:motor_control"}
Number speed_level "Fan - Speed Level" (G_fan) {channel="miio:basic:fan:speed_level"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}

Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum Mop 1C STYTJ01ZHM" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number BatteryLevel "Battery-Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery-Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Water Mode" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner-Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner-Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush-Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush-Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter-Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush-Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush-Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "clean-workmode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "clean-area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "clean-timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "clean-mode" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - Clean Log Start Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Done" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Annoy - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Annoy - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Annoy - Stop Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
String MapView "Map - Map View" (G_vacuum) {channel="miio:basic:vacuum:MapView"}
Number Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packets" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Robot Vacuum-Mop F9" <status>
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save-map-status"}

Dreame Robot Vacuum D9 (dreame.vacuum.p2009) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Robot Vacuum D9 " <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

Dreame Bot W10 (dreame.vacuum.p2027) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot W10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number mop_status "Vacuum Extend - Mop Status" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Dreame Bot Z10 Pro (dreame.vacuum.p2028) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot Z10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number auto_collect "Collect Dust - Auto Collect" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Clean Times" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}

Dreame Bot L10 Pro (dreame.vacuum.p2029) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot L10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Trouver Robot LDS Vacuum-Mop Finder" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop 2 Pro+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "MOVA Z500 Robot Vacuum and Mop Cleaner" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "MOVA L600 Robot Vacuum and Mop Cleaner" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

Dreame Bot D9 Max (dreame.vacuum.p2259) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot D9 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

HUIZUO ARIES For Bedroom (huayi.light.ari013) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ARIES For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO ARIES For Living Room (huayi.light.aries) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ARIES For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO Fan Light (huayi.light.fanwy) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Fan Light" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number:Dimensionless fan_level "Fan - Fan Level" (G_light) {channel="miio:basic:light:fan-level"}
Switch motor_reverse "Fan - Motor Reverse" (G_light) {channel="miio:basic:light:motor-reverse"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}

HUIZUO Fan Light(2020) (huayi.light.fanwy2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Fan Light(2020)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number:Dimensionless fan_level "Fan - Fan Level" (G_light) {channel="miio:basic:light:fan-level"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}
Number:Time time_off "Presets - Time Off" (G_light) {channel="miio:basic:light:time-off"}
Number:Temperature pre_colortemp "Presets - Pre Colortemp" (G_light) {channel="miio:basic:light:pre-colortemp"}
Dimmer pre_brightness "Presets - Pre Brightness" (G_light) {channel="miio:basic:light:pre-brightness"}
Number:Dimensionless pre_speed "Presets - Pre Speed" (G_light) {channel="miio:basic:light:pre-speed"}
Number reversal "Presets - Reversal" (G_light) {channel="miio:basic:light:reversal"}
Number pre_custom "Presets - Pre Custom" (G_light) {channel="miio:basic:light:pre-custom"}
Switch flabellum "Presets - Flabellum" (G_light) {channel="miio:basic:light:flabellum"}

HUIZUO PEGASUS For Living Room (huayi.light.peg091) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PEGASUS For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO PEGASUS For Bedroom (huayi.light.peg093) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PEGASUS For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO PISCES For Bedroom (huayi.light.pis123) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PISCES For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO PISCES For Living Room (huayi.light.pisces) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PISCES For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO TAURUS For Bedroom (huayi.light.tau023) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO TAURUS For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO TAURUS For Living Room (huayi.light.taurus) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO TAURUS For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO VIRGO For Bedroom (huayi.light.vir063) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO VIRGO For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO VIRGO For Living Room (huayi.light.virgo) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO VIRGO For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO Ceiling Light (huayi.light.wy) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Ceiling Light" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO LIANGCHEN(BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO SAG Downlight (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Bulb (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO YONG Downlight (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

huayi.light.wy204 (huayi.light.wy204) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "huayi.light.wy204" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

HUIZUO Heating Lamp (huayi.light.wyheat) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Heating Lamp" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Heater - Power" (G_light) {channel="miio:basic:light:on1"}
Number fault "Heater - Device Fault" (G_light) {channel="miio:basic:light:fault"}
Number heat_level "Heater - Heat Level" (G_light) {channel="miio:basic:light:heat-level"}
Switch screenshow "Other - Screenshow" (G_light) {channel="miio:basic:light:screenshow"}

HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ZIWEI Ceiling Lamp" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

Xiaomi Robot Vacuum-Mop 2S (ijai.vacuum.v19) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Xiaomi Robot Vacuum-Mop 2S" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String advanced_actions "Robot Cleaner - Advanced Actions" (G_vacuum) {channel="miio:basic:vacuum:advanced_actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Switch Status" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Robot Cleaner - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Robot Cleaner - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number:Dimensionless volume "Robot Cleaner - Locate Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Repeat State" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Door State" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Contact cloth_state "Sweep - Cloth State" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Robot Cleaner - Power" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water State" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Hypa Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Hypa Hours" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Hours" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Cur Lang" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Dirt Recognize" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognize" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - Ai Recognize" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Booster" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
String multi_prop_vacuum "Sweep - Multi Prop Vacuum" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch carpet_avoid "Sweep - Carpet Avoid" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Tank Shake" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Shake Shift" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
Contact map_encrypt "Sweep - Map Encrypt" (G_vacuum) {channel="miio:basic:vacuum:map_encrypt"}
Number order_id "Order - Order Id" (G_vacuum) {channel="miio:basic:vacuum:order_id"}
Switch enable "Order - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
Number:Time day "Order - Day" (G_vacuum) {channel="miio:basic:vacuum:day"}
Number:Time hour "Order - Hour" (G_vacuum) {channel="miio:basic:vacuum:hour"}
Number:Time minute "Order - Minute" (G_vacuum) {channel="miio:basic:vacuum:minute"}
Switch repeat "Order - Repeat" (G_vacuum) {channel="miio:basic:vacuum:repeat"}
Number clean_way "Order - Clean Way" (G_vacuum) {channel="miio:basic:vacuum:clean_way"}
Number suction "Order - Suction" (G_vacuum) {channel="miio:basic:vacuum:suction"}
Number water "Order - Water" (G_vacuum) {channel="miio:basic:vacuum:water"}
Switch twice_clean "Order - Twice Clean" (G_vacuum) {channel="miio:basic:vacuum:twice_clean"}
Number mapid "Order - Mapid" (G_vacuum) {channel="miio:basic:vacuum:mapid"}
Number room_count "Order - Room Count" (G_vacuum) {channel="miio:basic:vacuum:room_count"}
String room_data "Order - Room Data" (G_vacuum) {channel="miio:basic:vacuum:room_data"}
Number time_zone1 "Order - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone1"}
String all_enable_count "Order - All Enable Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String zone_points "Point Zone - Zone Points" (G_vacuum) {channel="miio:basic:vacuum:zone_points"}
String restrict_points "Point Zone - Restrict Points" (G_vacuum) {channel="miio:basic:vacuum:restrict_points"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember State" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Cur Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Map Num" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Cur Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Build Map" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Contact has_new_map "Map - Has New Map" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Contact dnd_enable "Disturb - Dnd Enable" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number:Time dnd_start_hour "Disturb - Dnd Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number:Time dnd_start_minute "Disturb - Dnd Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number:Time dnd_end_hour "Disturb - Dnd End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number:Time dnd_end_minute "Disturb - Dnd End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Disturb - Multi Prop Dnd" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

IKEA E27 white spectrum opal (ikea.light.led1545g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 white spectrum opal" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E27 white spectrum clear (ikea.light.led1546g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 white spectrum clear" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E14 white spectrum (ikea.light.led1536g5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E14 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA GU10 white spectrum (ikea.light.led1537r6) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA GU10 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E27 warm white (ikea.light.led1623g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA GU10 warm white (ikea.light.led1650r5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA GU10 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E14 warm white (ikea.light.led1649c5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E14 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) item file lines

note: Autogenerated example. Replace the id (curtain) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_curtain "Xiaomiyoupin Curtain Controller (Wi-Fi)" <status>
Number fault "Curtain - Device Fault" (G_curtain) {channel="miio:basic:curtain:fault"}
Number motor_control "Curtain - Motor Control" (G_curtain) {channel="miio:basic:curtain:motor_control"}
Number:Dimensionless current_position "Curtain - Current Position" (G_curtain) {channel="miio:basic:curtain:current-position"}
Number status "Curtain - Status" (G_curtain) {channel="miio:basic:curtain:status"}
Number:Dimensionless target_position "Curtain - Target Position" (G_curtain) {channel="miio:basic:curtain:target-position"}
Number manual_enabled "curtain_cfg - Manual Enabled" (G_curtain) {channel="miio:basic:curtain:manual-enabled"}
Number polarity "Curtain_cfg - Polarity" (G_curtain) {channel="miio:basic:curtain:polarity"}
Number pos_limit "curtain_cfg - Position Limit" (G_curtain) {channel="miio:basic:curtain:pos-limit"}
Number en_night_tip_light "Curtain_cfg - En_night_tip_light" (G_curtain) {channel="miio:basic:curtain:en_night_tip_light"}
Number run_time "Curtain_cfg - Run-time" (G_curtain) {channel="miio:basic:curtain:run-time"}
Number adjust_value "Motor_controller - Adjust_value" (G_curtain) {channel="miio:basic:curtain:adjust_value"}

Mi Air Purifier virtual (lumi.gateway.mgl03) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi Air Purifier virtual" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

Mi smart Home Gateway Hub (lumi.gateway.mieu01) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub" <status>
Switch guard "Guard" (G_gateway) {channel="miio:gateway:gateway:guard"}
Switch corridor "Automatic Night Light" (G_gateway) {channel="miio:gateway:gateway:corridor"}
Color nightlight "Night Light" (G_gateway) {channel="miio:gateway:gateway:nightlight"}
Color rgb "Colored Light" (G_gateway) {channel="miio:gateway:gateway:rgb"}
Number doorbell_volume "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbell_volume"}
Number alarming_volume "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarming_volume"}
Number gateway_volume "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gateway_volume"}
Number:Time arming_time "Arming Time" (G_gateway) {channel="miio:gateway:gateway:arming_time"}
Number:Time corridor_on_time "Corridor on time" (G_gateway) {channel="miio:gateway:gateway:corridor_on_time"}
String language "Voice prompt Language" (G_gateway) {channel="miio:gateway:gateway:language"}
String zigbee_channel "Zigbee Channel" (G_gateway) {channel="miio:gateway:gateway:zigbee_channel"}
String lumi_bind "Lumi_bind info" (G_gateway) {channel="miio:gateway:gateway:lumi_bind"}
String doorbell_push "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbell_push"}

Mi smart Home Gateway Hub v1 (lumi.gateway.v1) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub v1" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

Mi smart Home GatewayHub v2 (lumi.gateway.v2) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home GatewayHub v2" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

Mi smart Home Gateway Hub v3 (lumi.gateway.v3) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub v3" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Aqara LED Light Bulb (Tunable White)" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

Door lock (lumi.lock.v1) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Door lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door Lock (lumi.lock.aq1) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door Lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door Lock S2 (lumi.lock.acn02) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door Lock S2" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door lock S2 Pro (lumi.lock.acn03) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door lock S2 Pro" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (Zigbee)" <status>
Switch power "Power" (G_plug) {channel="miio:lumi:plug:power"}
Number load_power "Load Power" (G_plug) {channel="miio:lumi:plug:load_power"}
Switch en_night_tip_light "Led Light" (G_plug) {channel="miio:lumi:plug:en_night_tip_light"}
Switch poweroff_memory "Poweroff Memory" (G_plug) {channel="miio:lumi:plug:poweroff_memory"}
Number max_power "Max Power" (G_plug) {channel="miio:lumi:plug:max_power"}
String log "Device Log" (G_plug) {channel="miio:lumi:plug:log"}

Mi Window and Door Sensor (lumi.sensor_magnet.v2) item file lines

note: Autogenerated example. Replace the id (sensor_magnet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_magnet "Mi Window and Door Sensor" <status>
String log "Device Log" (G_sensor_magnet) {channel="miio:lumi:sensor_magnet:log"}

Mi Motion Sensor (lumi.sensor_motion.aq2) item file lines

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_motion "Mi Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

Mi Motion Sensor (lumi.sensor_motion.v2) item file lines

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_motion "Mi Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) item file lines

note: Autogenerated example. Replace the id (sensor_ht) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_ht "Mi Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_sensor_ht) {channel="miio:lumi:sensor_ht:temperature"}
Number:Dimensionless humidity "Humidity" (G_sensor_ht) {channel="miio:lumi:sensor_ht:humidity"}

Water Leak Sensor (lumi.sensor_wleak.aq1) item file lines

note: Autogenerated example. Replace the id (sensor_wleak) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_wleak "Water Leak Sensor" <status>
Switch leak "Leaking" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:leak"}
String log "Device Log" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:log"}

Aqara Temperature and Humidity Sensor (lumi.weather.v1) item file lines

note: Autogenerated example. Replace the id (weather) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_weather "Aqara Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_weather) {channel="miio:lumi:weather:temperature"}
Number:Dimensionless humidity "Humidity" (G_weather) {channel="miio:lumi:weather:humidity"}
Number:Pressure pressure "pressure" (G_weather) {channel="miio:lumi:weather:pressure"}

Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop Essential" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number target_water_level "Robot Cleaner - Target Water Level" (G_vacuum) {channel="miio:basic:vacuum:target-water-level"}
Number fan_level "Robot Cleaner - Fan Level" (G_vacuum) {channel="miio:basic:vacuum:fan-level"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
Switch alarm "Alarm - Alarm" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number:Dimensionless brush_life_level "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level1 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Time brush_left_time1 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number direction_key "Remote Control - Direction Key" (G_vacuum) {channel="miio:basic:vacuum:direction_key"}
Number:Area clean_area "Clean Record - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number clean_time "Clean Record - Clean Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area total_clean_area "Clean Record - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number total_clean_time "Clean Record - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_count "Clean Record - Total Clean Count" (G_vacuum) {channel="miio:basic:vacuum:total-clean-count"}
Number language "Language - Language" (G_vacuum) {channel="miio:basic:vacuum:language"}
Switch not_disturb_switch "Language - Not Disturb Switch" (G_vacuum) {channel="miio:basic:vacuum:not-disturb-switch"}
Number mop_status "Other Status - Mop Status" (G_vacuum) {channel="miio:basic:vacuum:mop-status"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "XIAOWAN Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

MR.BOND (mrbond.airer.m1pro) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

MR.BOND (mrbond.airer.m1s) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

MR.BOND (mrbond.airer.m1super) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

WIDETECH WDH318EFW1 Internet Dehumidifier (nwt.derh.wdh318efw1) item file lines

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_derh "WIDETECH WDH318EFW1 Internet Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
String mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless autohumidity "Auto humidity" (G_derh) {channel="miio:basic:derh:autohumidity"}
Number fanspeed "Fan Speed" (G_derh) {channel="miio:basic:derh:fanspeed"}
Switch buzzer "Buzzer" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "LED" (G_derh) {channel="miio:basic:derh:led"}
Switch childlock "Child Lock" (G_derh) {channel="miio:basic:derh:childlock"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch tankfull "Tank Full" (G_derh) {channel="miio:basic:derh:tankfull"}
Switch compressorstatus "Compressor Status" (G_derh) {channel="miio:basic:derh:compressorstatus"}
Switch defroststatus "Defrost Status" (G_derh) {channel="miio:basic:derh:defroststatus"}
Number fanst "Fan St" (G_derh) {channel="miio:basic:derh:fanst"}
String alarm "Alarm" (G_derh) {channel="miio:basic:derh:alarm"}

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Bedroom 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Bedroom 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Philips ZhiRui E27 bulb (philips.light.bulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E27 bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E14 Candle Lamp Frosted version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E14 Candle Lamp Crystal version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

Mijia Philips Color Bulb (philips.light.cbulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Light (philips.light.cbulbs) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Connected Ceiling (philips.light.ceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Connected Ceiling" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

Philips Light (philips.light.dcolor) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

ZhiRui Dimmable Downlight (philips.light.dlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "ZhiRui Dimmable Downlight" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiRui Downlight (philips.light.downlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui Downlight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Wi-Fi bulb E27 White (philips.light.hbulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Wi-Fi bulb E27 White" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Living room 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Smart Lamp (philips.light.mono1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Smart Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}

Philips ZhiRui Bedside Lamp (philips.light.moonlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch gonight "Go Night" (G_light) {channel="miio:basic:light:gonight"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

Zhirui Ceiling Lamp Black 80W (philips.light.obceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Black 40W (philips.light.obceim) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Black 28W (philips.light.obceis) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Philips Study Desk Lamp (philips.light.rwread) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Study Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number flm "Follow Me" (G_light) {channel="miio:basic:light:flm"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}

Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips EyeCare Connected Desk Lamp gen2." <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number illumination "Ambient Illumination" (G_light) {channel="miio:basic:light:illumination"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}

Mijia Philips Desk Lamp 2S (philips.light.sread2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Desk Lamp 2S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number illumination "Ambient Illumination" (G_light) {channel="miio:basic:light:illumination"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}

Philips Connected Lights (philips.light.virtual) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Connected Lights" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiYi Ceiling lamp (philips.light.zyceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

Philips ZhiYi Desk Lamp (philips.light.zysread) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Strip (philips.light.zystrip) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Strip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) item file lines

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_powerstrip "CHINGMI Smart Power Strip v1" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
String mode "Mode" (G_powerstrip) {channel="miio:basic:powerstrip:mode"}
Number:Power powerUsage "Power Consumption" (G_powerstrip) {channel="miio:basic:powerstrip:powerUsage"}
Number:ElectricPotential voltage "Voltage" (G_powerstrip) {channel="miio:basic:powerstrip:voltage"}
Switch led "wifi LED" (G_powerstrip) {channel="miio:basic:powerstrip:led"}
Number power_price "Power Price" (G_powerstrip) {channel="miio:basic:powerstrip:power_price"}
Number power_factor "Power Factor" (G_powerstrip) {channel="miio:basic:powerstrip:power_factor"}
Number:ElectricCurrent current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:current"}
Number:ElectricCurrent elec_leakage "Electic Leakage" (G_powerstrip) {channel="miio:basic:powerstrip:elec_leakage"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}

ROIDMI EVE vacuum (roidmi.vacuum.v60) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "ROIDMI EVE vacuum" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number on "Robot Cleaner - Switch Status" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time2 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time2"}
Number:Dimensionless brush_life_level2 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level2"}
Switch mop "Custom - Mop" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Work Station Freq" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Timing" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number clean_area "Custom - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
String uid "Custom - Uid" (G_vacuum) {channel="miio:basic:vacuum:uid"}
Switch auto_boost "Custom - Auto Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Forbid Mode" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_areas "Custom - Total Clean Areas" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Clean Counts" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Clean Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Double Clean" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Sweep" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Led Switch" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
Switch lidar_collision "Custom - Lidar Collision" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
Switch station_key "Custom - Station Key" (G_vacuum) {channel="miio:basic:vacuum:station_key"}
Switch station_led "Custom - Station Led" (G_vacuum) {channel="miio:basic:vacuum:station_led"}
String current_audio "Custom - Current Audio" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
String progress "Custom - Progress" (G_vacuum) {channel="miio:basic:vacuum:progress"}
Number station_type "Custom - Station Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
String voice_conf "Custom - Voice Conf" (G_vacuum) {channel="miio:basic:vacuum:voice_conf"}
String clean_path "Map - Clean Path" (G_vacuum) {channel="miio:basic:vacuum:clean_path"}
String restricted_zone "Map - Restricted Zone" (G_vacuum) {channel="miio:basic:vacuum:restricted_zone"}
String auto_area "Map - Auto Area" (G_vacuum) {channel="miio:basic:vacuum:auto_area"}
Switch map_memory "Map - Map Memory" (G_vacuum) {channel="miio:basic:vacuum:map_memory"}
String map_name "Map - Map Name" (G_vacuum) {channel="miio:basic:vacuum:map_name"}
Switch use_auto_area "Map - Use Auto Area" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Path Type" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Sweep Mode" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}

PTX OneKey Switch (WIFI) (090615.switch.xswitch01) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX OneKey Switch (WIFI)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}

PTX Twokey switch(wifi) (090615.switch.xswitch02) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX Twokey switch(wifi)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Number switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}

PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX ThreeKey Switch (WIFI)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Number switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
Number switch3state "Switch 3" (G_switch) {channel="miio:basic:switch:switch3state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
String switch3name "Switch Name 3" (G_switch) {channel="miio:basic:switch:switch3name"}

SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) item file lines

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_coffee "SCISHARE Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
String Status "status" (G_coffee) {channel="miio:basic:coffee:Status"}
Number expresso "Brew Expresso" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number expresso "Brew Americano" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number boil "Boil water" (G_coffee) {channel="miio:basic:coffee:boil"}

Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) item file lines

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_coffee "Xiaomi Scishare Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
String Status "status" (G_coffee) {channel="miio:basic:coffee:Status"}
Number expresso "Brew Expresso" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number expresso "Brew Americano" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number boil "Boil water" (G_coffee) {channel="miio:basic:coffee:boil"}

Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Viomi Cleaning Robot V-RVCLM21B" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

Mi Robot Vacuum-Mop P (viomi.vacuum.v7) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

Mi Robot Vacuum-Mop P (viomi.vacuum.v8) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

Viomi S9 (viomi.vacuum.v18) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Viomi S9" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number wdr_mode "Robot Cleaner - Wide Dynamic Range Mode" (G_vacuum) {channel="miio:basic:vacuum:wdr-mode"}
Number door_state "Robot Cleaner - Door State" (G_vacuum) {channel="miio:basic:vacuum:door-state"}
Number contact_state "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state"}
Number:Time contact_state1 "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state1"}
Number contact_state2 "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state2"}
Number mute "Robot Cleaner - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep-type"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Switch repeat_state "Viomi Vacuum - Repeat State" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Viomi Vacuum - Remember State" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number mop_route "Viomi Vacuum - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Number:Dimensionless side_brush_life "Viomi Vacuum - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Viomi Vacuum - Side Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Viomi Vacuum - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Viomi Vacuum - Main Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Viomi Vacuum - Hypa Life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Viomi Vacuum - Hypa Hours" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Viomi Vacuum - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Viomi Vacuum - Mop Hours" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number suction_grade "Viomi Vacuum - Suction Grade" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Viomi Vacuum - Water Grade" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number map_num "Viomi Vacuum - Map Num" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number time_zone "Viomi Vacuum - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
Number:Time clean_start_time "Viomi Vacuum - Clean Start Time" (G_vacuum) {channel="miio:basic:vacuum:clean-start-time"}
Number:Time clean_use_time "Viomi Vacuum - Clean Use Time" (G_vacuum) {channel="miio:basic:vacuum:clean-use-time"}
Number clean_area "Viomi Vacuum - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
String clean_map_url "Viomi Vacuum - Clean Map Url" (G_vacuum) {channel="miio:basic:vacuum:clean-map-url"}
Number clean_mode "Viomi Vacuum - Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:clean-mode"}
Number clean_way "Viomi Vacuum - Clean Way" (G_vacuum) {channel="miio:basic:vacuum:clean-way"}
String cur_lang "Viomi Vacuum - Cur Lang" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number cur_map_id "Viomi Vacuum - Cur Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
String cur_map_url "Viomi Vacuum - Cur Map Url" (G_vacuum) {channel="miio:basic:vacuum:cur-map-url"}
Number:Time last_update_time "Viomi Vacuum - Last Update Time" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number has_map "Viomi Vacuum - Has Map" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "Viomi Vacuum - Has Newmap" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number dust_collection "Viomi Vacuum - Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number dnd_enable "Order - Dnd Enable" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Order - Dnd Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Order - Dnd Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Order - Dnd End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Order - Dnd End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number dnd_timezone "Order - Dnd Timezone" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
Number timestamp "Order - Timestamp" (G_vacuum) {channel="miio:basic:vacuum:timestamp"}
String orderdata "Order - Orderdata" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
Number map_type "Map - Map Type" (G_vacuum) {channel="miio:basic:vacuum:map-type"}
Number map_id "Map - Map Id" (G_vacuum) {channel="miio:basic:vacuum:map-id"}
String map_name "Map - Map Name" (G_vacuum) {channel="miio:basic:vacuum:map-name"}
String cur_cleaning_path "Map - Cur Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur-cleaning-path"}
String map_list "Map - Map List" (G_vacuum) {channel="miio:basic:vacuum:map-list"}
String oper_result "Map - Oper Result" (G_vacuum) {channel="miio:basic:vacuum:oper-result"}
Number auto_area_id "Map - Auto Area Id" (G_vacuum) {channel="miio:basic:vacuum:auto-area-id"}
String target_voice "Voice - Target Voice" (G_vacuum) {channel="miio:basic:vacuum:target-voice"}
String cur_voice "Voice - Cur Voice" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
Number download_status "Voice - Download Status" (G_vacuum) {channel="miio:basic:vacuum:download-status"}
Number:Dimensionless download_progress "Voice - Download Progress" (G_vacuum) {channel="miio:basic:vacuum:download-progress"}

VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) item file lines

note: Autogenerated example. Replace the id (waterheater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterheater "VIOMI Internet Electric Water Heater 1A (60L)" <status>
Number washStatus "Wash Status" (G_waterheater) {channel="miio:basic:waterheater:washStatus"}
Number velocity "Velocity" (G_waterheater) {channel="miio:basic:waterheater:velocity"}
Number:Temperature waterTemp "Water Temperature" (G_waterheater) {channel="miio:basic:waterheater:waterTemp"}
Number:Temperature targetTemp "Target Temperature" (G_waterheater) {channel="miio:basic:waterheater:targetTemp"}
Number errStatus "Error Status" (G_waterheater) {channel="miio:basic:waterheater:errStatus"}
Number hotWater "Hot Water" (G_waterheater) {channel="miio:basic:waterheater:hotWater"}
Switch needClean "Need Clean" (G_waterheater) {channel="miio:basic:waterheater:needClean"}
Number modeType "Mode" (G_waterheater) {channel="miio:basic:waterheater:modeType"}
Number appointStart "Appoint Start" (G_waterheater) {channel="miio:basic:waterheater:appointStart"}
Number appointEnd "Appoint End" (G_waterheater) {channel="miio:basic:waterheater:appointEnd"}

Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Inverter Air Conditioner (1.5HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Vertical Air Conditioner (2HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Uclean Smart Toilet Seat (xjx.toilet.pro (opens new window)) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet Seat" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

Uclean Smart Toilet pure (xjx.toilet.pure) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet pure" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

Uclean Smart Toilet relax (xjx.toilet.relax) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet relax" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

Whale Spout Smart Toilet Zero (xjx.toilet.zero) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Whale Spout Smart Toilet Zero" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

Yeelight Smart Bath Heater Pro (yeelink.bhf_light.v1) item file lines

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_bhf_light "Yeelight Smart Bath Heater Pro" <status>
Switch power "Power" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
String bh_mode "Bath Heater mode" (G_bhf_light) {channel="miio:basic:bhf_light:bh_mode"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_bhf_light) {channel="miio:basic:bhf_light:delayoff"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number nightlightBrightness "Nightlight Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlightBrightness"}

Yeelight Smart Bath Heater (yeelink.bhf_light.v2) item file lines

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_bhf_light "Yeelight Smart Bath Heater" <status>
Switch power "Power" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
String bh_mode "Bath Heater mode" (G_bhf_light) {channel="miio:basic:bhf_light:bh_mode"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_bhf_light) {channel="miio:basic:bhf_light:delayoff"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number nightlightBrightness "Nightlight Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlightBrightness"}

Mi Bedside Lamp (yeelink.light.bslamp1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi Bedside Lamp 2 (yeelink.light.bslamp2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Bedside Lamp 2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Bedside Lamp II (yeelink.light.bslamp3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Bedside Lamp II" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Ceiling Light (yeelink.light.ceiling1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light SE (yeelink.light.ceiling2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light SE" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Light (yeelink.light.ceiling3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Light (yeelink.light.ceiling4) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling4.ambi) item file lines

note: Autogenerated example. Replace the id (ceiling4) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling4 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling4) {channel="miio:basic:ceiling4:power"}
Dimmer brightness "Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling4) {channel="miio:basic:ceiling4:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling4) {channel="miio:basic:ceiling4:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling4) {channel="miio:basic:ceiling4:colorMode"}
String name "Name" (G_ceiling4) {channel="miio:basic:ceiling4:name"}
String customScene "Set Scene" (G_ceiling4) {channel="miio:basic:ceiling4:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:nightlightBrightness"}

Mi LED Ceiling Light (yeelink.light.ceiling5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight HaoShi LED Ceiling Lamp Pro (yeelink.light.ceiling6) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Haoshi Ceiling Lamp (yeelink.light.ceiling7) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Haoshi Ceiling Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

LED Ceiling Light Crystal Plus (yeelink.light.ceiling8) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "LED Ceiling Light Crystal Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight HaoShi LED Ceiling Lamp Pro (yeelink.light.ceiling9) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Crystal Pendant Lamp (yeelink.light.ceiling10) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Crystal Pendant Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling10.ambi) item file lines

note: Autogenerated example. Replace the id (ceiling10) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling10 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling10) {channel="miio:basic:ceiling10:power"}
Dimmer brightness "Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling10) {channel="miio:basic:ceiling10:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling10) {channel="miio:basic:ceiling10:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling10) {channel="miio:basic:ceiling10:colorMode"}
String name "Name" (G_ceiling10) {channel="miio:basic:ceiling10:name"}
String customScene "Set Scene" (G_ceiling10) {channel="miio:basic:ceiling10:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:nightlightBrightness"}

Yeelight Ceiling Light 320 1S (yeelink.light.ceiling11) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light 320 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Stylized Ceiling Light Pro (yeelink.light.ceiling12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Stylized Ceiling Light  Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light (yeelink.light.ceiling13) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light Mini (yeelink.light.ceiling14) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Mini" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light 480 1S (yeelink.light.ceiling15) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light 480 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Xingyu Ceiling Light (yeelink.light.ceiling16) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Xingyu Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight ShaoHua Celing Light (yeelink.light.ceiling17) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight ShaoHua Celing Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light Pro (yeelink.light.ceiling18) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Ceiling Light Pro (yeelink.light.ceiling19) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling19.ambi) item file lines

note: Autogenerated example. Replace the id (ceiling19) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling19 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling19) {channel="miio:basic:ceiling19:power"}
Dimmer brightness "Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling19) {channel="miio:basic:ceiling19:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling19) {channel="miio:basic:ceiling19:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling19) {channel="miio:basic:ceiling19:colorMode"}
String name "Name" (G_ceiling19) {channel="miio:basic:ceiling19:name"}
String customScene "Set Scene" (G_ceiling19) {channel="miio:basic:ceiling19:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:nightlightBrightness"}

Yeelight Ceiling Light (yeelink.light.ceiling20) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight LED Ceiling Ambi Lamp (yeelink.light.ceiling20.ambi) item file lines

note: Autogenerated example. Replace the id (ceiling20) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling20 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling20) {channel="miio:basic:ceiling20:power"}
Dimmer brightness "Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling20) {channel="miio:basic:ceiling20:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling20) {channel="miio:basic:ceiling20:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling20) {channel="miio:basic:ceiling20:colorMode"}
String name "Name" (G_ceiling20) {channel="miio:basic:ceiling20:name"}
String customScene "Set Scene" (G_ceiling20) {channel="miio:basic:ceiling20:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:nightlightBrightness"}

Mi Smart LED Living Room Ceiling Light (yeelink.light.ceiling21) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Living Room Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Mi Smart LED Ceiling Light (yeelink.light.ceiling22) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Mi Smart LED Ceiling Light (350mm) (yeelink.light.ceiling23) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Ceiling Light (350mm)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Jade Smart LED Ceiling Light C2001 (yeelink.light.ceil26) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Jade Smart LED Ceiling Light C2001" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Color Bulb (yeelink.light.color1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Bulb (Color) (yeelink.light.color2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb (Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi LED Smart Bulb (White and Color) (yeelink.light.color3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Smart Bulb (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Bulb 1S（Color） (yeelink.light.color4) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb 1S（Color）" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi Smart LED Bulb Essential (White and Color) (yeelink.light.color5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Bulb Essential (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Smart LED Bulb 1SE (color) (yeelink.light.colora) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Smart LED Bulb 1SE (color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Bulb (Tunable) (yeelink.light.ct2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb (Tunable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi LED Desk Lamp (yeelink.light.lamp1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi Smart LED Desk Lamp Pro (yeelink.light.lamp2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Desk Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Lamp (yeelink.light.lamp3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi LED Desk Lamp 1S (yeelink.light.lamp4) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Desk Lamp 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Smart Desk Lamp Prime (yeelink.light.lamp5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Smart Desk Lamp Prime" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight (yeelink.light.lamp6) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Light Sensor Desk Lamp V1 (yeelink.light.lamp7) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Light Sensor Desk Lamp V1" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight (yeelink.light.lamp8) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Star LED Table Lamp (yeelink.light.lamp9) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Star LED Table Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Star Floor Lamp (yeelink.light.lamp10) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Star Floor Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Screen Light Bar (yeelink.light.lamp15) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Screen Light Bar" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}

Yeelight Bulb (yeelink.light.mono1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight White Bulb v2 (yeelink.light.mono2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight White Bulb v2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Bulb 1S（Dimmable） (yeelink.light.mono4) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb 1S（Dimmable）" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED Filament Bulb (yeelink.light.mono5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Filament Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Mi Smart LED Bulb (yeelink.light.mono6) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight LED smart bulb W3(dimmable) (yeelink.light.monoa) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED smart bulb W3(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight GU10 Smart Bulb W1(dimmable) (yeelink.light.monob) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight GU10 Smart Bulb W1(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Whiteglow Panel Light (yeelink.light.panel1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Whiteglow Panel Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yeelight Lightstrip (yeelink.light.strip1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Lightstrip Plus (yeelink.light.strip2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Lightstrip Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Willow LED Lightstrip (yeelink.light.strip4) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Willow LED Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Light Group (Mi & Yeelight) (yeelink.light.virtual) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Light Group (Mi & Yeelight)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

Yeelight Smart Dual Control Module (yeelink.switch.sw1) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "Yeelight Smart Dual Control Module" <status>
Switch on "First Switch - Switch Status" (G_switch) {channel="miio:basic:switch:on"}
Number mode "First Switch Default - Mode" (G_switch) {channel="miio:basic:switch:mode"}
Number mode1 "First Switch - Delay" (G_switch) {channel="miio:basic:switch:mode1"}
Switch on1 "Second Switch - Switch Status" (G_switch) {channel="miio:basic:switch:on1"}
Number mode2 "Second Switch Default - Mode" (G_switch) {channel="miio:basic:switch:mode2"}
Number mode3 "Second Switch Service - Delay" (G_switch) {channel="miio:basic:switch:mode3"}
Switch interlock "Extension - Interlock" (G_switch) {channel="miio:basic:switch:interlock"}
Number flash "Extension - Flash" (G_switch) {channel="miio:basic:switch:flash"}
String rc_list "Extension - Rc List" (G_switch) {channel="miio:basic:switch:rc-list"}

Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Light Aiyue 480" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Lamp Hefeng 430" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Lamp Hefeng Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

Mi Water Purifier lx2 (yunmi.waterpuri.lx2) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx2" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier lx4 (yunmi.waterpuri.lx4) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx4" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 1A/400G Pro" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 500G/500G Pro" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier 600G (yunmi.waterpuri.lx8) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 600G" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier D1 (yunmi.waterpuri.lx9) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier D1" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier lx10 (yunmi.waterpuri.lx10) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx10" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier C1 (Triple Setting)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier S1 (yunmi.waterpuri.lx12) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier S1" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

Mi Water Purifier v1 (yunmi.waterpurifier.v1) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v1" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

Mi Water Purifier v2 (yunmi.waterpurifier.v2) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v2" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier (Under sink) v3" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

Mi Water Purifier v4 (yunmi.waterpurifier.v4) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v4" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

Smartmi Ventilation System (zhimi.airfresh.va2) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Smartmi Ventilation System" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch childLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:childLock"}
Switch buzzer "Buzzer" (G_airfresh) {channel="miio:basic:airfresh:buzzer"}
Number aqi "Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number averageaqi "Average Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:averageaqi"}
Number:Time filterhours "Filter Hours used" (G_airfresh) {channel="miio:basic:airfresh:filterhours"}
Number:Time usedhours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:usedhours"}
Number motorspeed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motorspeed"}
Number led_level "Led - Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Smartmi Fresh Air System (Heating)" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch childLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:childLock"}
Switch buzzer "Buzzer" (G_airfresh) {channel="miio:basic:airfresh:buzzer"}
Number aqi "Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number averageaqi "Average Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:averageaqi"}
Number:Time filterhours "Filter Hours used" (G_airfresh) {channel="miio:basic:airfresh:filterhours"}
Number:Time usedhours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:usedhours"}
Number motorspeed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motorspeed"}
Number led_level "Led - Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator C1-80" <status>
String actions "Actions" (G_airfresh) {channel="miio:basic:airfresh:actions"}
Switch on "Air Fresh - Switch Status" (G_airfresh) {channel="miio:basic:airfresh:on"}
Number fault "Device Fault" (G_airfresh) {channel="miio:basic:airfresh:fault"}
Number fan_level "Air Fresh - Fan Level" (G_airfresh) {channel="miio:basic:airfresh:fan_level"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airfresh) {channel="miio:basic:airfresh:filter_used_time"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airfresh) {channel="miio:basic:airfresh:filter_life_level"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airfresh) {channel="miio:basic:airfresh:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Dimmer brightness "Indicator Light - Brightness" (G_airfresh) {channel="miio:basic:airfresh:brightness"}
Number motor_a_speed_rpm "Custom Service - Motor A Speed Rpm" (G_airfresh) {channel="miio:basic:airfresh:motor_a_speed_rpm"}
Number motor_b_speed_rpm "Custom Service - Motor B Speed Rpm" (G_airfresh) {channel="miio:basic:airfresh:motor_b_speed_rpm"}
Number:Temperature temperature "Custom Service - Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Mi PM2.5 Air Quality Monitor" <status>
Switch power "Power" (G_airmonitor) {channel="miio:basic:airmonitor:power"}
Number aqi "Air Quality Index" (G_airmonitor) {channel="miio:basic:airmonitor:aqi"}
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Switch usb_state "USB State" (G_airmonitor) {channel="miio:basic:airmonitor:usb_state"}
Switch time_state "Time State" (G_airmonitor) {channel="miio:basic:airmonitor:time_state"}
Switch night_state "Night State" (G_airmonitor) {channel="miio:basic:airmonitor:night_state"}
Number night_begin "Night Begin Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_begin"}
Number night_end "Night End Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_end"}

Xiaomi Smart Air Purifier 4 Compact (zhimi.airp.cpa4) item file lines

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airp "Xiaomi Smart Air Purifier 4 Compact" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch power "Air Purifier - Switch Status" (G_airp) {channel="miio:basic:airp:power"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Air Purifier - Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number:Dimensionless brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number motor_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number country_code "Custom Service - Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number favorite_level "Custom Service - Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number:Time filter_used_time_dbg "Custom Service - Filter Used Time Dbg" (G_airp) {channel="miio:basic:airp:filter_used_time_dbg"}
Number aqi_updata_heartbeat "Aqi - Aqi Updata Heartbeat" (G_airp) {channel="miio:basic:airp:aqi_updata_heartbeat"}

Mi Air Purifier 3C (zhimi.airp.mb4a) item file lines

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airp "Mi Air Purifier 3C" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
String fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number moto_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:moto_speed_rpm"}
String miio_lib_version "Custom Service - Miio Lib Version" (G_airp) {channel="miio:basic:airp:miio_lib_version"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number:Time aqi_updata_heartbeat "Custom Service - Aqi Updata Heartbeat" (G_airp) {channel="miio:basic:airp:aqi_updata_heartbeat"}

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5) item file lines

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airp "Xiaomi Smart Air Purifier 4" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Air Purifier - Switch Status" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Air Purifier - Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Air Purifier - Anion" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number temperature_display_unit "Device Display Unit - Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Custom Service - Motor Set Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Custom Service - Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Custom Service - Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Custom Service - Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Custom Service - Manual Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number country_code "Custom Service - Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number iic_error_count "Custom Service - Iic Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number:Time filter_used_debug "Filter Time - Filter Used Debug" (G_airp) {channel="miio:basic:airp:filter_used_debug"}
Number purify_volume "Aqi - Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "Aqi - Aqi State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2 (mini)" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2 (zhimi.airpurifier.m2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2S (zhimi.airpurifier.ma1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2S (zhimi.airpurifier.ma2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 3 (zhimi.airpurifier.ma4) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3" <status>
Number fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan-level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5-density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter-life-level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-used-time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical-controls-locked"}
String button_pressed "Button - Button_pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button-pressed"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-max-time"}
Number filter_hour_used_debug "Filter Time - Filter Hour Used Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter-hour-used-debug"}
Number m1_strong "Motor Speed - M1 Strong" (G_airpurifier) {channel="miio:basic:airpurifier:m1-strong"}
Number m1_high "Motor Speed - M1 High" (G_airpurifier) {channel="miio:basic:airpurifier:m1-high"}
Number m1_med "Motor Speed - M1 Med" (G_airpurifier) {channel="miio:basic:airpurifier:m1-med"}
Number m1_med_l "Motor Speed - M1 Med L" (G_airpurifier) {channel="miio:basic:airpurifier:m1-med-l"}
Number m1_low "Motor Speed - M1 Low" (G_airpurifier) {channel="miio:basic:airpurifier:m1-low"}
Number m1_silent "Motor Speed - M1 Silent" (G_airpurifier) {channel="miio:basic:airpurifier:m1-silent"}
Number m1_favorite "Motor Speed - M1 Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:m1-favorite"}
Number motor1_speed "Motor Speed - Motor1 Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1-speed"}
Number motor1_set_speed "Motor Speed - Motor1 Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1-set-speed"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite-fan-level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use-time"}
Number:Volume purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify-volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi"}
Number average_aqi_cnt "Aqi - Average Aqi Cnt" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi-cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-zone"}
String sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor-state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-goodh"}
Number aqi_runstate "Aqi - Aqi Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-state"}
Number aqi_updata_heartbeat "Aqi - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-updata-heartbeat"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-factory-id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-product-id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-serial-num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app-extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main-channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave-channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
Switch buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom-door"}
Number reboot_cause "Others - Reboot_cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot-cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw-version"}
Number i2c_error_count "Others - I2c Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:i2c-error-count"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual-level"}

Mi Air Purifier 2S (zhimi.airpurifier.mb1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3/3H" <status>
Number fault "Air Purifier - Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan-level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2.5 density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5-density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter-life-level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-used-time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical-controls-locked"}
String button_pressed "Button - Button Pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button-pressed"}
Number filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-max-time"}
Number filter_hour_debug "Filter Time - Filter Hour Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter-hour-debug"}
Number motor_strong "Motor Speed - Motor Strong" (G_airpurifier) {channel="miio:basic:airpurifier:motor-strong"}
Number motor_high "Motor Speed - Motor High" (G_airpurifier) {channel="miio:basic:airpurifier:motor-high"}
Number motor_med "Motor Speed - Motor Med" (G_airpurifier) {channel="miio:basic:airpurifier:motor-med"}
Number motor_med_l "Motor Speed - Motor Med L" (G_airpurifier) {channel="miio:basic:airpurifier:motor-med-l"}
Number motor_low "Motor Speed - Motor Low" (G_airpurifier) {channel="miio:basic:airpurifier:motor-low"}
Number motor_silent "Motor Speed - Motor Silent" (G_airpurifier) {channel="miio:basic:airpurifier:motor-silent"}
Number motor_favorite "Motor Speed - Motor Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:motor-favorite"}
Number motor_speed "Motor Speed - Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor-speed"}
Number motor_set_speed "Motor Speed - Motor Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor-set-speed"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite-fan-level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use-time"}
Number:Volume purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify-volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi"}
Number average_aqi_cnt "Aqi - Average Aqi Cnt" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi-cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-zone"}
String sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor-state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-goodh"}
Number aqi_runstate "Aqi - Aqi Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-state"}
Number aqi_updata_heartbeat "Aqi - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-updata-heartbeat"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-factory-id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-product-id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-serial-num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app-extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main-channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave-channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
Switch buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom-door"}
Number reboot_cause "Others - Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot-cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw-version"}
Number iic_error_count "Others - Iic Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:iic-error-count"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual-level"}
Number country_code "Others - National Code" (G_airpurifier) {channel="miio:basic:airpurifier:country-code"}

Mi Air Purifier 3C (zhimi.airpurifier.mb4) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3C" <status>
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
String fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "Screen - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number moto_speed_rpm "Custom Service - Moto Speed Rpm" (G_airpurifier) {channel="miio:basic:airpurifier:moto_speed_rpm"}
String miio_lib_version "Custom Service - Miio Lib Version" (G_airpurifier) {channel="miio:basic:airpurifier:miio_lib_version"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number:Time aqi_updata_heartbeat "Custom Service - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_updata_heartbeat"}

Mi Air Purifier 2S (zhimi.airpurifier.mc1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2H (zhimi.airpurifier.mc2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2H" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Super (zhimi.airpurifier.sa1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Super" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier MAX / MAX Pro" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v1 (zhimi.airpurifier.v1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v1" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v2 (zhimi.airpurifier.v2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v3 (zhimi.airpurifier.v3) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v3" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v5 (zhimi.airpurifier.v5) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v5" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro v6" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro v7" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Number volume "Volume" (G_airpurifier) {channel="miio:basic:airpurifier:volume"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Number illuminance "Illuminance" (G_airpurifier) {channel="miio:basic:airpurifier:illuminance"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number motorspeed2 "Motor Speed 2" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed2"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro H (zhimi.airpurifier.vb2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro H" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_airpurifier) {channel="miio:basic:airpurifier:volume"}
Number brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
String button_pressed "Button - Button_pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button_pressed"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Number:Time filter_hour_used_debug "Filter Time - Filter Hour Used Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter_hour_used_debug"}
Number m1_strong "Motor Speed - M1 Strong" (G_airpurifier) {channel="miio:basic:airpurifier:m1_strong"}
Number m1_high "Motor Speed - M1 High" (G_airpurifier) {channel="miio:basic:airpurifier:m1_high"}
Number m1_med "Motor Speed - M1 Med" (G_airpurifier) {channel="miio:basic:airpurifier:m1_med"}
Number m1_med_l "Motor Speed - M1 Med L" (G_airpurifier) {channel="miio:basic:airpurifier:m1_med_l"}
Number m1_low "Motor Speed - M1 Low" (G_airpurifier) {channel="miio:basic:airpurifier:m1_low"}
Number m1_silent "Motor Speed - M1 Silent" (G_airpurifier) {channel="miio:basic:airpurifier:m1_silent"}
Number m1_favorite "Motor Speed - M1 Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:m1_favorite"}
Number motor1_speed "Motor Speed - Motor1 Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1_speed"}
Number motor1_set_speed "Motor Speed - Motor1 Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1_set_speed"}
Number favorite_level "Motor Speed - Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number average_aqi_cnt "Aqi - Average_aqi Read Times" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi_cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_zone"}
Number sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor_state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_goodh"}
Number aqi_runstate "Aqi - Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_factory_id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_product_id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_serial_num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app_extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main_channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave_channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
String buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom_door"}
Number reboot_cause "Others - Reboot_cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}
Number:Time powertime "Others - Powertime" (G_airpurifier) {channel="miio:basic:airpurifier:powertime"}
Number country_code "Others - Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}

Smartmi Air Purifier (zhimi.airpurifier.za1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Smartmi Air Purifier" <status>
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fault "Air Purifier - Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number air_quality "Environment - Air Quality" (G_airpurifier) {channel="miio:basic:airpurifier:air_quality"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_fan_level"}
Number motor_speed "Motor Speed - Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_zone"}
Number sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor_state"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_factory_id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_product_id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_serial_num"}
Number reboot_cause "Others - Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw_version"}
Number sgp_ethanol "Others - Sgp Ethanol" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_ethanol"}
Number sgp_serial "Others - Sgp Serial" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_serial"}
String sgp_version "Others - Sgp Version" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_version"}
Number country_code "Others - Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}
Switch gesture_status "Others - Gesture Status" (G_airpurifier) {channel="miio:basic:airpurifier:gesture_status"}

Mi Standing Fan (zhimi.fan.sa1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Standing Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Mi Smart Fan (zhimi.fan.v1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi DC Pedestal Fan (zhimi.fan.v2) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi DC Pedestal Fan (zhimi.fan.v3) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi Inverter Pedestal Fan (zhimi.fan.za1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Inverter Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi Standing Fan 2 (zhimi.fan.za3) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 2" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number poweroffTime "Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Number buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi Standing Fan 2S (zhimi.fan.za4) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 2S" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number poweroffTime "Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Number buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

Smartmi Standing Fan 3 (zhimi.fan.za5) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 3 " <status>
Switch on "Fan - Power" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Number off_delay "Fan - Power Off Delay" (G_fan) {channel="miio:basic:fan:off_delay"}
Switch anion "Fan - Anion" (G_fan) {channel="miio:basic:fan:anion"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_fan) {channel="miio:basic:fan:brightness"}
Switch alarm "Alarm - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_fan) {channel="miio:basic:fan:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_fan) {channel="miio:basic:fan:temperature"}
Number button_press "Custom Service - Button Press" (G_fan) {channel="miio:basic:fan:button_press"}
Switch battery_state "Custom Service - Battery State" (G_fan) {channel="miio:basic:fan:battery_state"}
Number speed_now "Custom Service - Speed Now" (G_fan) {channel="miio:basic:fan:speed_now"}
Switch ac_state "Custom Service - Ac State" (G_fan) {channel="miio:basic:fan:ac_state"}
Number:Dimensionless speed_level "Custom Service - Speed Level" (G_fan) {channel="miio:basic:fan:speed_level"}

Mi Smart Space Heater S (zhimi.heater.ma2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

Mi Smart Baseboard Heater E (zhimi.heater.ma3) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Baseboard Heater E" <status>
String actions "Actions" (G_heater) {channel="miio:basic:heater:actions"}
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

Mi Smart Space Heater S (zhimi.heater.mc2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}

Smartmi Smart Fan (zhimi.heater.na1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Fan" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}

Smartmi Smart Fan Heater (zhimi.heater.nb1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Fan Heater" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}
Switch hw_en "Private Service - Hw En" (G_heater) {channel="miio:basic:heater:hw_en"}

Smartmi Radiant Heater Smart Version (zhimi.heater.za1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Radiant Heater Smart Version" <status>
Switch power "Power" (G_heater) {channel="miio:basic:heater:power"}
Number:Temperature target_temperature "Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Dimmer brightness "Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch buzzer "Buzzer Status" (G_heater) {channel="miio:basic:heater:buzzer"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_heater) {channel="miio:basic:heater:relative_humidity"}
Switch childlock "Child Lock" (G_heater) {channel="miio:basic:heater:childlock"}
Switch HWSwitch "HW Switch" (G_heater) {channel="miio:basic:heater:HWSwitch"}
Number:Temperature temperature "Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number:Time usedhours "Run Time" (G_heater) {channel="miio:basic:heater:usedhours"}

Smartmi Smart Convector Heater 1S (zhimi.heater.za2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}

Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}
Number country_code "Private-Service - Country-Code" (G_heater) {channel="miio:basic:heater:country-code"}

Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Number aqi "Air Quality Index" (G_humidifier) {channel="miio:basic:humidifier:aqi"}
Number translevel "Trans_level" (G_humidifier) {channel="miio:basic:humidifier:translevel"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifer 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number Fault "Humidifier Device Fault" (G_humidifier) {channel="miio:basic:humidifier:Fault"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless targetHumidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:targetHumidity"}
Number waterlevel "Water Level" (G_humidifier) {channel="miio:basic:humidifier:waterlevel"}
Number bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number:Time powerhours "Power Time" (G_humidifier) {channel="miio:basic:humidifier:powerhours"}
Number targetmotorspeed "Target Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:targetmotorspeed"}
Number actualmotorspeed "Actual Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:actualmotorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}
Number ButtonPressed "Button Pressed" (G_humidifier) {channel="miio:basic:humidifier:ButtonPressed"}
Switch clean "Clean Mode" (G_humidifier) {channel="miio:basic:humidifier:clean"}

Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String humidifierMode "Humidifier Mode" (G_humidifier) {channel="miio:basic:humidifier:humidifierMode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String humidifierMode "Humidifier Mode" (G_humidifier) {channel="miio:basic:humidifier:humidifierMode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

Smartmi Humidifier (zhimi.humidifier.v1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Number aqi "Air Quality Index" (G_humidifier) {channel="miio:basic:humidifier:aqi"}
Number translevel "Trans_level" (G_humidifier) {channel="miio:basic:humidifier:translevel"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

Mi Smart Power Strip (zimi.powerstrip.v2) item file lines

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_powerstrip "Mi Smart Power Strip" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
Number powerUsage "Power Consumption" (G_powerstrip) {channel="miio:basic:powerstrip:powerUsage"}
Switch led "wifi LED" (G_powerstrip) {channel="miio:basic:powerstrip:led"}
Number power_price "power_price" (G_powerstrip) {channel="miio:basic:powerstrip:power_price"}
Number current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:current"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}
Number lp_autooff "Low Power Auto Off" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff"}
Number lp_autooff_delay "Low Power Limit Time" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff_delay"}
Number lp_threshold "Low Power Threshold" (G_powerstrip) {channel="miio:basic:powerstrip:lp_threshold"}

Country Servers

Known country Servers: cn, de, i2, ru, sg, us

Mapping of countries in mihome app to server:

Country	Country Code	Server
Afghanistan	AF	sg
Albania	AL	de
Algeria	DZ	sg
American Samoa	AS	sg
Andorra	AD	de
Angola	AO	sg
Anguilla	AI	us
Antarctica	AQ	sg
Antigua and Barbuda	AG	us
Argentina	AR	us
Armenia	AM	sg
Aruba	AW	us
Ascension Island	AC	sg
Australia	AU	sg
Austria	AT	de
Azerbaijan	AZ	sg
Bahamas	BS	us
Bahrain	BH	sg
Bangladesh	BD	sg
Barbados	BB	us
Belarus	BY	de
Belgium	BE	de
Belize	BZ	us
Benin	BJ	sg
Bermuda	BM	us
Bhutan	BT	sg
Bolivia	BO	us
Bosnia and Herzegovina	BA	de
Botswana	BW	sg
Bouvet Island	BV	sg
Brazil	BR	us
British Indian Ocean Territory	IO	sg
British Virgin Islands	VG	us
Brunei	BN	sg
Bulgaria	BG	de
Burkina Faso	BF	sg
Burundi	BI	sg
Cambodia	KH	sg
Cameroon	CM	sg
Canada	CA	us
Canary Islands	IC	sg
Cape Verde	CV	sg
Cayman Islands	KY	us
Central African Republic	CF	sg
Ceuta and Melilla	EA	de
Chad	TD	sg
Chile	CL	us
Chinese mainland	CN	cn
Christmas Island	CX	sg
Cocos Islands	CC	sg
Colombia	CO	us
Comoros	KM	sg
Congo - Brazzaville	CG	sg
Congo - Kinshasa	CD	sg
Cook Islands	CK	sg
Costa Rica	CR	us
Croatia	HR	de
Curaçao	CW	us
Cyprus	CY	de
Czechia	CZ	de
Côte d'Ivoire	CI	sg
Denmark	DK	de
Diego Garcia	DG	sg
Djibouti	DJ	sg
Dominica	DM	us
Dominican Republic	DO	us
Dutch Caribbean	BQ	us
Ecuador	EC	us
Egypt	EG	sg
El Salvador	SV	us
Equatorial Guinea	GQ	sg
Eritrea	ER	sg
Estonia	EE	de
Ethiopia	ET	sg
Falkland Islands	FK	us
Faroe Islands	FO	de
Fiji	FJ	sg
Finland	FI	de
France	FR	de
French Guiana	GF	de
French Southern Territories	TF	sg
French polynesia	PF	sg
Gabon	GA	sg
Gambia	GM	sg
Georgia	GE	sg
Germany	DE	de
Ghana	GH	sg
Gibraltar	GI	de
Greece	GR	de
Greenland	GL	us
Grenada	GD	us
Guadeloupe	GP	us
Guam	GU	sg
Guatemala	GT	us
Guernsey	GG	de
Guinea	GN	sg
Guinea-Bissau	GW	sg
Guyana	GY	us
Haiti	HT	us
Honduras	HN	us
Hong Kong	HK	sg
Hungary	HU	de
Iceland	IS	de
India	IN	i2
Indonesia	ID	sg
Iraq	IQ	sg
Ireland	IE	de
Isle of Man	IM	de
Israel	IL	sg
Italy	IT	de
Jamaica	JM	us
Japan	JP	sg
Jersey	JE	de
Jordan	JO	sg
Kazakhstan	KZ	sg
Kenya	KE	sg
Kiribati	KI	sg
Kosovo	XK	de
Kuwait	KW	sg
Kyrgyzstan	KG	sg
Laos	LA	sg
Latvia	LV	de
Lebanon	LB	sg
Lesotho	LS	sg
Liberia	LR	sg
Libya	LY	sg
Liechtenstein	LI	de
Lithuania	LT	de
Luxembourg	LU	de
Macao	MO	sg
Macedonia	MK	de
Madagascar	MG	sg
Malawi	MW	sg
Malaysia	MY	sg
Maldives	MV	sg
Mali	ML	sg
Malta	MT	de
Marshall islands	MH	sg
Martinique	MQ	us
Mauritania	MR	sg
Mauritius	MU	sg
Mayotte	YT	sg
Mexico	MX	us
Micronesia	FM	sg
Moldova	MD	de
Monaco	MC	de
Mongolia	MN	sg
Montenegro	ME	de
Montserrat	MS	us
Morocco	MA	sg
Mozambique	MZ	sg
Myanmar (Burma)	MM	sg
Namibia	NA	sg
Nauru	NR	sg
Nepal	NP	sg
Netherlands	NL	de
New Caledonia	NC	sg
New Zealand	NZ	sg
Nicaragua	NI	us
Niger	NE	sg
Nigeria	NG	sg
Niue	NU	sg
Norfolk Island	NF	sg
Northern Mariana Islands	MP	sg
Norway	NO	de
Oman	OM	sg
Pakistan	PK	sg
Palau	PW	sg
Palestinian Territories	PS	sg
Panama	PA	us
Papua New Guinea	PG	sg
Paraguay	PY	us
Peru	PE	us
Philippines	PH	sg
Pitcairn Islands	PN	sg
Poland	PL	de
Portugal	PT	de
Puerto Rico	PR	us
Qatar	QA	sg
Romania	RO	de
Russia	RU	ru
Rwanda	RW	sg
Réunion	RE	sg
Saint Barthélemy	BL	us
Saint Helena	SH	sg
Saint Kitts and Nevis	KN	us
Saint Lucia	LC	us
Saint Martin	MF	de
Saint Pierre and Miquelon	PM	us
Saint Vincent and The Grenadines	VC	us
Samoa	WS	sg
San Marino	SM	de
Saudi Arabia	SA	sg
Senegal	SN	sg
Serbia	RS	de
Seychelles	SC	sg
Sierra Leone	SL	sg
Singapore	SG	sg
Slovakia	SK	de
Slovenia	SI	de
Solomon Islands	SB	sg
Somalia	SO	sg
South Africa	ZA	sg
South Georgia and South Sandwich Islands	GS	us
South Korea	KR	sg
South Sudan	SS	sg
Spain	ES	de
Sri Lanka	LK	sg
Suriname	SR	us
Svalbard and Jan Mayen	SJ	de
Swaziland	SZ	sg
Sweden	SE	de
Switzerland	CH	de
São Tomé and Príncipe	ST	sg
Taiwan	TW	sg
Tajikistan	TJ	sg
Tanzania	TZ	sg
Thailand	TH	sg
Timor-Leste	TL	sg
Togo	TG	sg
Tokelau	TK	sg
Tonga	TO	sg
Trinidad and Tobago	TT	us
Tristan da Cunha	TA	sg
Tunisia	TN	sg
Turkey	TR	sg
Turkmenistan	TM	sg
Turks and Caicos Islands	TC	us
Tuvalu	TV	sg
U.S. Virgin Islands	VI	us
Uganda	UG	sg
Ukraine	UA	de
United Arab Emirates	AE	sg
United Kingdom	GB	de
United States	US	us
United States Minor Outlying Islands	UM	us
Uruguay	UY	us
Uzbekistan	UZ	sg
Vanuatu	VU	sg
Vatican	VA	de
Vietnam	VN	sg
Wallis and Futuna	WF	sg
Western Sahara	EH	sg
Yemen	YE	sg
Zambia	ZM	sg
Zimbabwe	ZW	sg
Åland Islands	AX	de

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)