Meteostick Binding

This is the binding for the Meteostick (opens new window) weather receiver dongle. This is an RF receiver that can receive data directly from Davis weather devices (and others).

Supported Things

This binding support 2 different things types

Thing	Type	Description
meteostick_bridge	Bridge	This is the Meteostick USB stick
meteostick_davis_iss	Thing	This is the Davis Vue ISS

Binding Configuration

The Meteostick things need to be manually added - there is no discovery in the Meteostick binding.

First add and configure the Meteostick bridge - the port and frequency band for your region need to be set. Next add the sensor and configure the channel number.

Thing Configuration

meteostick_bridge Configuration Options

Option	Description
port	Sets the serial port to be used for the stick
mode	Sets the mode (frequency band)

Set mode to one of the following depending on your device and region:

Mode	Device	Region	Frequency
0	Davis	North America	915 Mhz
1	Davis	Europe	868 Mhz
2	Davis	Australia	915 Mhz
3	Fine Offset	North America	915 Mhz
4	Fine Offset	Europe	868 Mhz
5	Davis	New Zealand	931.5 Mhz

meteostick_davis_iss Configuration Options

Option	Description
channel	Sets the RF channel used for this sensor
spoon	Size of rain spoon assembly for this sensor in mm. Default value is 0.254 (0.01") for use with Davis part number 7345.280. Set to 0.2 for use with Davis part number 7345.319

Channels

Meteostick

Channel Type ID	Item Type	Description
pressure	Number:Pressure	Air pressure
indoor-temperature	Number:Temperature	Indoor temperature

Davis ISS

Channel Type ID	Item Type	Description
outdoor-temperature	Number:Temperature	Outside temperature
humidity	Number	Humidity
wind-direction	Number:Angle	Wind direction
wind-direction-last2min-average	Number:Angle	Wind direction average over last 2 minutes
wind-speed	Number:Speed	Wind speed
wind-speed-last2min-average	Number:Speed	Wind speed average over last 2 minutes
wind-speed-last2min-maximum	Number:Speed	Wind speed maximum over last 2 minutes
rain-raw	Number	Raw rain counter from the tipping spoon sensor
rain-currenthour	Number:Length	The rainfall in the last 60 minutes
rain-lasthour	Number:Length	The rainfall in the previous hour
solar-power	Number	Solar power from the sensor station
signal-strength	Number	Received signal strength
low-battery	Switch	Low battery warning

Rainfall

There are three channels associated with rainfall. The raw counter from the tipping bucket is provided, the rainfall in the last 60 minutes is updated on each received rainfall and provides the past 60 minutes of rainfall. The rainfall in the previous hour is the rainfall for each hour of the day and is updated on the hour.

Full Example

This example uploads weather data to for your personal weather station at Weather Underground every two minutes.

Steps:

1. Install the MeteoStick (opens new window) binding for use with your Davis Vantage Vue Integrated Sensor Suite (ISS) (opens new window).
2. Register (opens new window) your personal weather station with Weather Underground and make note of the station ID and password issued.
3. Add the following files to your openHAB configuration:

things/meteostick.things

Things can be defined in the .things file as follows:

meteostick:meteostick_bridge:receiver [ port="/dev/tty.usbserial-AI02XA60", mode=1 ]
meteostick:meteostick_davis_iss:iss (meteostick:meteostick_bridge:receiver) [ channel=1, spoon=0.2 ]

Note the configuration options for port, mode, channel and spoon above and adjust as needed for your specific hardware.

items/meteostick.items

Number:Pressure MeteoStickPressure "Meteostick Pressure [%.1f hPa]"{ channel="meteostick:meteostick_bridge:receiver:pressure" }
Number:Temperature DavisVantageVueOutdoorTemperature "ISS Outdoor Temp [%.1f °C]" { channel="meteostick:meteostick_davis_iss:iss:outdoor-temperature" }
Number DavisVantageVueHumidity "ISS Humidity [%.0f %%]" { channel="meteostick:meteostick_davis_iss:iss:humidity" }
Number:Angle DavisVantageVueWindDirection "ISS Wind Direction [%.0f °]" { channel="meteostick:meteostick_davis_iss:iss:wind-direction" }
Number:Angle DavisVantageVueWindDirectionAverage "ISS Average Wind Direction [%.0f °]" { channel="meteostick:meteostick_davis_iss:iss:wind-direction-last2min-average" }
Number:Speed DavisVantageVueWindSpeed "ISS Wind Speed [%.1f m/s]" { channel="meteostick:meteostick_davis_iss:iss:wind-speed" }
Number:Speed DavisVantageVueWindSpeedAverage "ISS Average Wind Speed [%.1f m/s]" { channel="meteostick:meteostick_davis_iss:iss:wind-speed-last2min-average" }
Number:Speed DavisVantageVueWindSpeedMaximum "ISS Maximum Wind Speed [%.1f m/s]" { channel="meteostick:meteostick_davis_iss:iss:wind-speed-last2min-maximum" }
Number:Length DavisVantageVueRainCurrentHour "ISS Rain Current Hour [%.1f mm]" { channel="meteostick:meteostick_davis_iss:iss:rain-currenthour" }

rules/meteostick.rules

Replace YOUR_ID and your_password below with the values from the the Weather Underground registration process.

import java.net.URLEncoder
import java.text.SimpleDateFormat
import java.util.Date
import java.util.Map
import java.util.TimeZone

/* Uploads weather station data using the format documented here:

   https://feedback.weather.com/customer/en/portal/articles/2924682-pws-upload-protocol?b_id=17298
 */

rule PWS
when
 Item DavisVantageVueWindDirectionAverage received update
then
 val id = 'YOUR_ID'
 val pw = 'your_password'
 val sdf = new SimpleDateFormat('yyyy-MM-dd HH:mm:ss')
 sdf.setTimeZone(TimeZone.getTimeZone('UTC'))
 val double rh = DavisVantageVueHumidity.getStateAs(DecimalType).doubleValue
 val double tempc = DavisVantageVueOutdoorTemperature.getStateAs(QuantityType).toUnit('°C').doubleValue
 val double dewptc = 243.04 * (Math.log(rh/100) + ((17.625 * tempc) / (243.04 + tempc))) / (17.625 - Math.log(rh/100) - ((17.625 * tempc) / (243.04 + tempc)))
 val double dewptf = new QuantityType(dewptc, CELSIUS).toUnit('°F').doubleValue
 val Map<String, Object> params = newLinkedHashMap(
  'action' ->           'updateraw',
  'ID' ->               id,
  'PASSWORD' ->         pw,
  'dateutc' ->          sdf.format(new Date()),
  'winddir' ->          DavisVantageVueWindDirection.getStateAs(QuantityType).toUnit('°').intValue,
  'windspeedmph' ->     DavisVantageVueWindSpeed.getStateAs(QuantityType).toUnit('mph').doubleValue,
  'windgustmph' ->      DavisVantageVueWindSpeedMaximum.getStateAs(QuantityType).toUnit('mph').doubleValue,
  'windgustdir' ->      DavisVantageVueWindDirectionAverage.getStateAs(QuantityType).toUnit('°').intValue,
  'windspdmph_avg2m' -> DavisVantageVueWindSpeedAverage.getStateAs(QuantityType).toUnit('mph').doubleValue,
  'winddir_avg2m' ->    DavisVantageVueWindDirectionAverage.getStateAs(QuantityType).toUnit('°').intValue,
  'humidity' ->         DavisVantageVueHumidity.state,
  'dewptf' ->           dewptf,
  'tempf' ->            DavisVantageVueOutdoorTemperature.getStateAs(QuantityType).toUnit('°F').doubleValue,
  'rainin' ->           DavisVantageVueRainCurrentHour.getStateAs(QuantityType).toUnit('in').doubleValue,
  'baromin' ->          MeteoStickPressure.getStateAs(QuantityType).toUnit('inHg').doubleValue,
  'softwaretype' ->     'openHAB 2.4')

 var url = 'https://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?'
 var first = true
 for (key : params.keySet()) {
  if (!first) {
   url += '&'
  }
  url += key + '=' + URLEncoder::encode(params.get(key).toString, 'UTF-8')
  first = false
 }

 logDebug('PWS', 'url is {}', url)
 sendHttpGetRequest(url)
end

openHAB will now report your weather station data to Weather Underground every two minutes.

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)