MELCloud Binding

This is an openHAB binding for Mitsubishi MELCloud (opens new window). Installing this binding you can control your Mitsubishi devices from openHAB without accessing the MELCloud App and benefiting from all openHAB automations.

Supported Things

Supported thing types

• melcloudaccount (bridge)
• acdevice
• heatpumpdevice

A bridge is required to connect to your MELCloud account.

Discovery

Discovery is used after a bridge has been created and configured with your login information.

1. Add the binding
2. Add a new thing of type melcloudaccount and configure with username and password
3. Go to Inbox and start discovery devices using MELCloud Binding
4. Supported devices (A.C. Device, Heatpump Device) should appear in your inbox

Binding support also manual thing configuration by thing files.

Thing Configuration

In order to manually create a thing file and not use the discovery routine you will need to know device MELCloud device ID. This is a bit difficult to get. The easiest way of getting this is enable debug level logging of the binding or discovery devices by the binding (discovered device can be removed afterwards).

MELCloud account configuration:

Config	Mandatory	Description
username	x	Email address tied to MELCloud account.
password	x	Password to MELCloud account.
language		Language ID, see table below.

LanguageId	Language
0	English (default)
1	Bulgarian
2	Czech
3	Danish
4	German
5	Estonian
6	Spanish
7	French
8	Armenian
9	Latvian
10	Lithuanian
11	Hungarian
12	Dutch
13	Norwegian
14	Polish
15	Portuguese
16	Russian
17	Finnish
18	Swedish
19	Italian
20	Ukrainian
21	Turkish
22	Greek
23	Croatian
24	Romanian
25	Slovenian

A.C. device and Heatpump device configuration:

Config	Mandatory	Description
deviceID	x	MELCloud device ID.
buildingID		MELCloud building ID. If not defined, binding tries to find matching id by device ID.
pollingInterval		Refresh time interval in seconds for updates from MELCloud. Defaults to 60 seconds.

Channels

A.C. device channels

Channel	Type	Description	Read Only
power	Switch	Power Status of Device.	False
operationMode	String	Operation mode: "1" = Heat, "2" = Dry, "3" = Cool, "7" = Fan, "8" = Auto.	False
setTemperature	Number:Temperature	Set Temperature: Min = 10, Max = 40.	False
fanSpeed	String	Fan speed: "0" = Auto, "1" = 1, "2" = 2, "3" = 3, "4" = 4, "5" = 5.	False
vaneHorizontal	String	Vane Horizontal: "0" = Auto, "1" = 1, "2" = 2, "3" = 3, "4" = 4, "5" = 5, "12" = Swing.	False
vaneVertical	String	Vane Vertical: "0" = Auto, "1" = 1, "2" = 2, "3" = 3, "4" = 4, "5" = 5, "7" = Swing.	False
roomTemperature	Number:Temperature	Room temperature.	True
lastCommunication	DateTime	Last Communication time when MELCloud communicated to the device.	True
nextCommunication	DateTime	Next communication time when MELCloud will communicate to the device.	True
offline	Switch	Is device in offline state.	True
hasPendingCommand	Switch	Device has a pending command(s).	True

Heatpump device channels

Channel	Type	Description	Read Only
power	Switch	Power Status of Device.	False
forcedHotWaterMode	Switch	If water mode is Heat Now (true) or Auto (false)	False
setTemperatureZone1	Number:Temperature	Set Temperature Zone 1: Min = 10, Max = 30.	False
roomTemperatureZone1	Number:Temperature	Room temperature Zone 1.	True
tankWaterTemperature	Number:Temperature	Tank water temperature.	True
lastCommunication	DateTime	Last Communication time when MELCloud communicated to the device.	True
nextCommunication	DateTime	Next communication time when MELCloud will communicate to the device.	True
offline	Switch	Is device in offline state.	True
hasPendingCommand	Switch	Device has a pending command(s).	True

Full Example for items configuration

melcloud.things

Bridge melcloud:melcloudaccount:myaccount "My MELCloud account" [ username="[email protected]", password="xxxxxx", language="0" ] {
 Thing acdevice livingroom "Livingroom A.C. device" [ deviceID=123456, pollingInterval=60 ]
 Thing heatpumpdevice attic "Attic Heatpump device" [ deviceID=789012, pollingInterval=60 ]
}

melcloud.items

Switch      power               { channel="melcloud:acdevice:myaccount:livingroom:power" }
String      operationMode       { channel="melcloud:acdevice:myaccount:livingroom:operationMode" }
Number      setTemperature      { channel="melcloud:acdevice:myaccount:livingroom:setTemperature" }
String      fanSpeed            { channel="melcloud:acdevice:myaccount:livingroom:fanSpeed" }
String      vaneHorizontal      { channel="melcloud:acdevice:myaccount:livingroom:vaneHorizontal" }
String      vaneVertical        { channel="melcloud:acdevice:myaccount:livingroom:vaneVertical" }
Number      roomTemperature     { channel="melcloud:acdevice:myaccount:livingroom:roomTemperature" }
DateTime    lastCommunication   { channel="melcloud:acdevice:myaccount:livingroom:lastCommunication" }
DateTime    nextCommunication   { channel="melcloud:acdevice:myaccount:livingroom:nextCommunication" }
Switch      offline             { channel="melcloud:acdevice:myaccount:livingroom:offline" }
Switch      hasPendingCommand   { channel="melcloud:acdevice:myaccount:livingroom:hasPendingCommand" }

Switch      heatpumpPower               { channel="melcloud:heatpumpdevice:myaccount:attic:power" }
Switch      heatpumpForcedHotWaterMode  { channel="melcloud:heatpumpdevice:myaccount:attic:forcedHotWaterMode" }
Number      heatpumpSetTemperatureZone1 { channel="melcloud:heatpumpdevice:myaccount:attic:setTemperatureZone1" }
Number      heatpumpRoomTemperatureZone1{ channel="melcloud:heatpumpdevice:myaccount:attic:roomTemperatureZone1" }
Number      heatpumpTankWaterTemperature{ channel="melcloud:heatpumpdevice:myaccount:attic:tankWaterTemperature" }
DateTime    heatpumpLastCommunication   { channel="melcloud:heatpumpdevice:myaccount:attic:lastCommunication" }
DateTime    heatpumpNextCommunication   { channel="melcloud:heatpumpdevice:myaccount:attic:nextCommunication" }
Switch      heatpumpOffline             { channel="melcloud:heatpumpdevice:myaccount:attic:offline" }
Switch      heatpumpHasPendingCommand   { channel="melcloud:heatpumpdevice:myaccount:attic:hasPendingCommand" }

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)