This page is part of archived documentation for openHAB 3.4. Go to the current stable version
# Epson Projector Binding
This binding is compatible with Epson projectors that support the ESC/VP21 protocol over the built-in network (Ethernet or Wi-Fi) port, serial port or USB to serial adapter.
If your projector does not have built-in networking, you can connect to your projector's serial port via a TCP connection using a serial over IP device or by usingser2net.
# Supported Things
This binding supports two thing types based on the connection used: projector-serial and projector-tcp.
# Discovery
If the projector has a built-in Ethernet port connected to the same network as the openHAB server and the 'AMX Device Discovery' option is present and enabled in the projector's network menu, the thing will be discovered automatically. Serial port or serial over IP connections must be configured manually.
# Binding Configuration
There are no overall binding configuration settings that need to be set. All settings are through thing configuration parameters.
# Thing Configuration
The projector-serial thing has the following configuration parameters:
| Parameter | Name | Description | Required |
|---|---|---|---|
| serialPort | Serial Port | Serial port device name that is connected to the Epson projector to control, e.g. COM1 on Windows, /dev/ttyS0 on Linux or /dev/tty.PL2303-0000103D on Mac. | yes |
| pollingInterval | Polling Interval | Polling interval in seconds to update channel states, range 5-60 seconds; default 10 seconds. | no |
| maxVolume | Max Volume Range | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20 | no |
The projector-tcp thing has the following configuration parameters:
| Parameter | Name | Description | Required |
|---|---|---|---|
| host | Host Name | Host Name or IP address for the projector or serial over IP device. | yes |
| port | Port | Port for the projector or serial over IP device; default 3629 for projectors with built-in Ethernet connector or Wi-Fi. | yes |
| pollingInterval | Polling Interval | Polling interval in seconds to update channel states, range 5-60 seconds; default 10 seconds. | no |
| maxVolume | Max Volume Range | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20 | no |
Some notes:
The binding should work on all Epson projectors that support the ESC/VP21 protocol, however not all binding channels will be useable on all projectors.
The source channel includes a dropdown with the most common source inputs.
If your projector has a source input that is not in the dropdown, the two character hex code to access that input will be displayed by the source channel when that input is selected by the remote control.
By using the sitemap mapping or a rule to send the input's code back to the source channel, any source on the projector can be accessed by the binding.
The following channels aspectratio, colormode, luminance, gamma and background are pre-populated with a full set of options but not every option will be useable on all projectors.
If your projector has an option in one of the above mentioned channels that is not recognized by the binding, the channel will display 'UNKNOWN' if that un-recognized option is selected by the remote control.
The volume channel is a dimmer (0-100%) that is scaled to the range on the projector, either 0-20 or 0-40 per the maxVolume configuration setting. If your projector uses a different range, then the volume channel will not work.
If the projector power is switched to off in the middle of a polling operation, some of the channel values may become undefined until the projector is switched on again.
If the binding fails to connect to the projector using the direct IP connection, ensure that no password is configured on the projctor.
On Linux, you may get an error stating the serial port cannot be opened when the epsonprojector binding tries to load.
You can get around this by adding the
openhabuser to thedialoutgroup like this:usermod -a -G dialout openhab.Also on Linux you may have issues with the USB if using two serial USB devices e.g. epsonprojector and RFXcom. See the general documentation about serial port configuration for more on symlinking the USB ports.
Here is an example of ser2net.conf (for ser2net version < 4) you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using ser2net Linux tool (opens new window) (take care, the baud rate is specific to the Epson projector):
4444:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL
- Here is an example of ser2net.yaml (for ser2net version >= 4) you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using ser2net Linux tool (opens new window) (take care, the baud rate is specific to the Epson projector):
connection: &conEpson
accepter: tcp,4444
enable: on
options:
kickolduser: true
connector: serialdev,
/dev/ttyUSB0,
9600n81,local
# Channels
| Channel | Item Type | Purpose | Values |
|---|---|---|---|
| power | Switch | Powers the projector on or off. | |
| powerstate | String | Retrieves the textual power state of the projector. | Read only |
| source | String | Retrieve or set the input source. | See above |
| aspectratio | String | Retrieve or set the aspect ratio. | See above |
| colormode | String | Retrieve or set the color mode. | See above |
| freeze | Switch | Turn the freeze screen mode on or off. | |
| mute | Switch | Turn the AV mute on or off. | |
| volume | Dimmer | Retrieve or set the volume. Scaled to 0-20 or 0-40 on the projector per maxVolume setting. | 0% - 100% |
| luminance | String | Retrieve or set the lamp mode. | See above |
| brightness | Number | Retrieve or set the brightness. | -24 - +24 |
| contrast | Number | Retrieve or set the contrast. | -24 - +24 |
| density | Number | Retrieve or set the density (color saturation). | -32 - +32 |
| tint | Number | Retrieve or set the tint. | -32 - +32 |
| colortemperature | Number | Retrieve or set the color temperature. | 0 - +9 |
| fleshtemperature | Number | Retrieve or set the flesh temperature. | 0 - +6 |
| gamma | String | Retrieve or set the gamma setting. | See above |
| autokeystone | Switch | Turn the auto keystone mode on or off. | |
| verticalkeystone | Number | Retrieve or set the vertical keystone. | -30 - +30 |
| horizontalkeystone | Number | Retrieve or set the horizontal keystone. | -30 - +30 |
| verticalposition | Number | Retrieve or set the vertical position. | -8 - +10 |
| horizontalposition | Number | Retrieve or set the horizontal position. | -23 - +26 |
| verticalreverse | Switch | Turn the vertical reverse mode on or off. | |
| horizontalreverse | Switch | Turn the horizontal reverse mode on or off. | |
| background | String | Retrieve or set the background color/logo. | See above |
| keycode | String | Send a key operation command to the projector. (2 character code) | Send only |
| lamptime | Number | Retrieves the lamp hours. | Read only |
| errcode | Number | Retrieves the last error code. | Read only |
| errmessage | String | Retrieves the description of the last error. | Read only |
# Full Example
things/epson.things:
// serial port connection
epsonprojector:projector-serial:hometheater "Projector" [ serialPort="COM5", pollingInterval=10, maxVolume=20 ]
// direct IP or serial over IP connection
epsonprojector:projector-tcp:hometheater "Projector" [ host="192.168.0.10", port=3629, pollingInterval=10, maxVolume=20 ]
items/epson.items
Switch epsonPower { channel="epsonprojector:projector-serial:hometheater:power" }
String epsonSource "Source [%s]" { channel="epsonprojector:projector-serial:hometheater:source" }
String epsonAspectRatio "Aspect Ratio [%s]" { channel="epsonprojector:projector-serial:hometheater:aspectratio" }
String epsonColorMode "Color Mode [%s]" { channel="epsonprojector:projector-serial:hometheater:colormode" }
Switch epsonFreeze { channel="epsonprojector:projector-serial:hometheater:freeze" }
Switch epsonMute { channel="epsonprojector:projector-serial:hometheater:mute" }
Dimmer epsonVolume { channel="epsonprojector:projector-serial:hometheater:volume" }
String epsonLuminance "Lamp Mode [%s]" { channel="epsonprojector:projector-serial:hometheater:luminance" }
Number epsonBrightness { channel="epsonprojector:projector-serial:hometheater:brightness" }
Number epsonContrast { channel="epsonprojector:projector-serial:hometheater:contrast" }
Number epsonDensity { channel="epsonprojector:projector-serial:hometheater:density" }
Number epsonTint { channel="epsonprojector:projector-serial:hometheater:tint" }
Number epsonColorTemperature { channel="epsonprojector:projector-serial:hometheater:colortemperature" }
Number epsonFleshTemperature { channel="epsonprojector:projector-serial:hometheater:fleshtemperature" }
String epsonGamma "Gamma [%s]" { channel="epsonprojector:projector-serial:hometheater:gamma" }
Switch epsonAutokeystone { channel="epsonprojector:projector-serial:hometheater:autokeystone" }
Number epsonVerticalKeystone { channel="epsonprojector:projector-serial:hometheater:verticalkeystone" }
Number epsonHorizontalKeystone { channel="epsonprojector:projector-serial:hometheater:horizontalkeystone" }
Number epsonVerticalPosition { channel="epsonprojector:projector-serial:hometheater:verticalposition" }
Number epsonHorizontalPosition { channel="epsonprojector:projector-serial:hometheater:horizontalposition" }
Switch epsonVerticalReverse { channel="epsonprojector:projector-serial:hometheater:verticalreverse" }
Switch epsonHorizontalReverse { channel="epsonprojector:projector-serial:hometheater:horizontalreverse" }
String epsonBackground "Background [%s]" { channel="epsonprojector:projector-serial:hometheater:background" }
String epsonKeyCode "Key Code [%s]" { channel="epsonprojector:projector-serial:hometheater:keycode", autoupdate="false" }
String epsonPowerState "Power State [%s]" <switch> { channel="epsonprojector:projector-serial:hometheater:powerstate" }
Number epsonLampTime "Lamp Time [%d h]" <switch> { channel="epsonprojector:projector-serial:hometheater:lamptime" }
Number epsonErrCode "Error Code [%d]" <error> { channel="epsonprojector:projector-serial:hometheater:errcode" }
String epsonErrMessage "Error Message [%s]" <error> { channel="epsonprojector:projector-serial:hometheater:errmessage" }
sitemaps/epson.sitemap
sitemap epson label="Epson Projector"
{
Frame label="Controls" {
Switch item=epsonPower label="Power"
Selection item=epsonSource label="Source" mappings=["30"="HDMI1", "A0"="HDMI2", "14"="Component", "20"="PC DSUB", "41"="Video", "42"="S-Video"]
Switch item=epsonFreeze label="Freeze"
Switch item=epsonMute label="AV Mute"
// Volume can be a Setpoint also
Slider item=epsonVolume label="Volume" minValue=0 maxValue=100 step=1 icon="soundvolume"
Switch item=epsonKeyCode label="Navigation" icon="screen" mappings=["03"="Menu", "35"="˄", "36"="˅", "37"="<", "38"=">", "16"="Enter"]
}
Frame label="Adjust Image" {
Setpoint item=epsonBrightness label="Brightness"
Setpoint item=epsonContrast label="Contrast"
Setpoint item=epsonDensity label="Color Saturation"
Setpoint item=epsonTint label="Tint"
Switch item=epsonAutokeystone label="Auto Keystone"
Setpoint item=epsonVerticalKeystone label="Vertical Keystone"
Setpoint item=epsonHorizontalKeystone label="Horizontal Keystone"
Setpoint item=epsonVerticalPosition label="Vertical Position"
Setpoint item=epsonHorizontalPosition label="Horizontal Position"
Selection item=epsonBackground label="Background"
}
Frame label="Flip Projection" {
Switch item=epsonVerticalReverse label="Vertical Reverse"
Switch item=epsonHorizontalReverse label="Horizontal Reverse"
}
Frame label="Info" {
Text item=epsonAspectRatio
Text item=epsonColorMode
Text item=epsonColorTemperature label="Color Temperature"
Text item=epsonFleshTemperature label="Flesh Temperature"
Text item=epsonGamma
Text item=epsonLuminance
Text item=epsonPowerState
Text item=epsonLampTime
Text item=epsonErrCode
Text item=epsonErrMessage
}
}